From eeef2f6b9f6e090c52fb3882c4d3e44d7c527570 Mon Sep 17 00:00:00 2001
From: Jose Abreu <Jose.Abreu@synopsys.com>
Date: Tue, 11 Jun 2019 17:18:46 +0200
Subject: [PATCH] net: stmmac: Start adding phylink support
Start adding the phylink callbacks.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 4 ++
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 48 +++++++++++++++++++
3 files changed, 53 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 0b5c8d74c683b1..cf0c9f4f347ae1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -4,6 +4,7 @@ config STMMAC_ETH
depends on HAS_IOMEM && HAS_DMA
select MII
select PHYLIB
+ select PHYLINK
select CRC32
imply PTP_1588_CLOCK
select RESET_CONTROLLER
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index a16ada8b85075a..b8386778f6c618 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/stmmac.h>
#include <linux/phy.h>
+#include <linux/phylink.h>
#include <linux/pci.h>
#include "common.h"
#include <linux/ptp_clock_kernel.h>
@@ -155,6 +156,9 @@ struct stmmac_priv {
struct mii_bus *mii;
int mii_irq[PHY_MAX_ADDR];
+ struct phylink_config phylink_config;
+ struct phylink *phylink;
+
struct stmmac_extra_stats xstats ____cacheline_aligned_in_smp;
struct stmmac_safety_stats sstats;
struct plat_stmmacenet_data *plat;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 6a2f072c0ce3e9..e2e69cb08fefbf 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -45,6 +45,7 @@
#include <linux/seq_file.h>
#endif /* CONFIG_DEBUG_FS */
#include <linux/net_tstamp.h>
+#include <linux/phylink.h>
#include <net/pkt_cls.h>
#include "stmmac_ptp.h"
#include "stmmac.h"
@@ -848,6 +849,39 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
priv->pause, tx_cnt);
}
+static void stmmac_validate(struct phylink_config *config,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+ int tx_cnt = priv->plat->tx_queues_to_use;
+ int max_speed = priv->plat->max_speed;
+
+ /* Cut down 1G if asked to */
+ if ((max_speed > 0) && (max_speed < 1000)) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+ }
+
+ /* Half-Duplex can only work with single queue */
+ if (tx_cnt > 1) {
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 1000baseT_Half);
+ }
+
+ bitmap_andnot(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_andnot(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static int stmmac_mac_link_state(struct phylink_config *config,
+ struct phylink_link_state *state)
+{
+ return -EOPNOTSUPP;
+}
+
static void stmmac_mac_config(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
@@ -900,6 +934,11 @@ static void stmmac_mac_config(struct net_device *dev)
writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
}
+static void stmmac_mac_an_restart(struct phylink_config *config)
+{
+ /* Not Supported */
+}
+
static void stmmac_mac_link_down(struct net_device *dev, bool autoneg)
{
struct stmmac_priv *priv = netdev_priv(dev);
@@ -914,6 +953,15 @@ static void stmmac_mac_link_up(struct net_device *dev, bool autoneg)
stmmac_mac_set(priv, priv->ioaddr, true);
}
+static const struct phylink_mac_ops __maybe_unused stmmac_phylink_mac_ops = {
+ .validate = stmmac_validate,
+ .mac_link_state = stmmac_mac_link_state,
+ .mac_config = NULL, /* TO BE FILLED */
+ .mac_an_restart = stmmac_mac_an_restart,
+ .mac_link_down = NULL, /* TO BE FILLED */
+ .mac_link_up = NULL, /* TO BE FILLED */
+};
+
/**
* stmmac_adjust_link - adjusts the link parameters
* @dev: net device structure
--
GitLab