From e43e0df13f8528ca55ed79f469c4b2af897fa796 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Thu, 19 Nov 2015 16:56:41 +0100
Subject: [PATCH] i2c: rcar: make sure clocks are on when doing clock
calculation
When calculating the bus speed, the clock should be on, of course. Most
bootloaders left them on, so this went unnoticed so far.
Move the ioremapping out of this clock-enabled-block and prepare for
adding hw initialization there, too.
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
drivers/i2c/busses/i2c-rcar.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index b0ae560b38c308..dac0f5d1945341 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -650,19 +650,23 @@ static int rcar_i2c_probe(struct platform_device *pdev)
return PTR_ERR(priv->clk);
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->io = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->io))
+ return PTR_ERR(priv->io);
+
bus_speed = 100000; /* default 100 kHz */
of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed);
priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data;
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
ret = rcar_i2c_clock_calculate(priv, bus_speed, dev);
if (ret < 0)
- return ret;
+ goto out_pm_put;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->io = devm_ioremap_resource(dev, res);
- if (IS_ERR(priv->io))
- return PTR_ERR(priv->io);
+ pm_runtime_put(dev);
irq = platform_get_irq(pdev, 0);
init_waitqueue_head(&priv->wait);
@@ -682,22 +686,26 @@ static int rcar_i2c_probe(struct platform_device *pdev)
dev_name(dev), priv);
if (ret < 0) {
dev_err(dev, "cannot get irq %d\n", irq);
- return ret;
+ goto out_pm_disable;
}
- pm_runtime_enable(dev);
platform_set_drvdata(pdev, priv);
ret = i2c_add_numbered_adapter(adap);
if (ret < 0) {
dev_err(dev, "reg adap failed: %d\n", ret);
- pm_runtime_disable(dev);
- return ret;
+ goto out_pm_disable;
}
dev_info(dev, "probed\n");
return 0;
+
+ out_pm_put:
+ pm_runtime_put(dev);
+ out_pm_disable:
+ pm_runtime_disable(dev);
+ return ret;
}
static int rcar_i2c_remove(struct platform_device *pdev)
--
GitLab