From d358def706880defa4c9e87381c5bf086a97d5f9 Mon Sep 17 00:00:00 2001
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Date: Tue, 5 Feb 2019 16:42:53 +0530
Subject: [PATCH] i2c: cadence: Fix the hold bit setting
In case the hold bit is not needed we are carrying the old values.
Fix the same by resetting the bit when not needed.
Fixes the sporadic i2c bus lockups on National Instruments
Zynq-based devices.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Reported-by: Kyle Roeschley <kyle.roeschley@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Tested-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
drivers/i2c/busses/i2c-cadence.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index b1360571829161..d917cefc5a19c6 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -382,8 +382,10 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
+ if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -440,8 +442,11 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->send_count > CDNS_I2C_FIFO_DEPTH)
+ if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
+
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
--
GitLab