diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu
new file mode 100644
index 0000000000000000000000000000000000000000..33c133e2a631a0d390353f76e4ad0697a568c60f
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-system-cpu
@@ -0,0 +1,25 @@
+What: /sys/devices/system/cpu/dscr_default
+Date: 13-May-2014
+KernelVersion: v3.15.0
+Contact:
+Description: Writes are equivalent to writing to
+ /sys/devices/system/cpu/cpuN/dscr on all CPUs.
+ Reads return the last written value or 0.
+ This value is not a global default: it is a way to set
+ all per-CPU defaults at the same time.
+Values: 64 bit unsigned integer (bit field)
+
+What: /sys/devices/system/cpu/cpu[0-9]+/dscr
+Date: 13-May-2014
+KernelVersion: v3.15.0
+Contact:
+Description: Default value for the Data Stream Control Register (DSCR) on
+ a CPU.
+ This default value is used when the kernel is executing and
+ for any process that has not set the DSCR itself.
+ If a process ever sets the DSCR (via direct access to the
+ SPR) that value will be persisted for that process and used
+ on any CPU where it executes (overriding the value described
+ here).
+ If set by a process it will be inherited by child processes.
+Values: 64 bit unsigned integer (bit field)
diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
similarity index 95%
rename from Documentation/devicetree/bindings/clock/corenet-clock.txt
rename to Documentation/devicetree/bindings/clock/qoriq-clock.txt
index 24711af48e30c7176f3b0d5c88628b5f2c5c57e4..5666812fc42b5d04f2f80043a4416e749a2b9e4e 100644
--- a/Documentation/devicetree/bindings/clock/corenet-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -7,6 +7,14 @@ which can then be passed to a variety of internal logic, including
cores and peripheral IP blocks.
Please refer to the Reference Manual for details.
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+
+Chassis Version Example Chips
+--------------- -------------
+1.0 p4080, p5020, p5040
+2.0 t4240, b4860, t1040
+
1. Clock Block Binding
Required properties:
@@ -85,7 +93,7 @@ Example for clock block and clock provider:
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-1.0";
clock-output-names = "sysclk";
- }
+ };
pll0: pll0@800 {
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt
new file mode 100644
index 0000000000000000000000000000000000000000..65c90776c6200112e82d226a05a19e390fe840a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/bfticu.txt
@@ -0,0 +1,25 @@
+KEYMILE bfticu Chassis Management FPGA
+
+The bfticu is a multifunction device that manages the whole chassis.
+Its main functionality is to collect IRQs from the whole chassis and signals
+them to a single controller.
+
+Required properties:
+- compatible: "keymile,bfticu"
+- interrupt-controller: the bfticu FPGA is an interrupt controller
+- interrupts: the main IRQ line to signal the collected IRQs
+- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
+ of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+ chassis-mgmt@3,0 {
+ compatible = "keymile,bfticu";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <3 0 0x100>;
+ interrupt-parent = <&mpic>;
+ interrupts = <6 1 0 0>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/qriox.txt b/Documentation/devicetree/bindings/mfd/qriox.txt
new file mode 100644
index 0000000000000000000000000000000000000000..f301e2d4ce7660f28b0d1a9ba6616d8e76296f40
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qriox.txt
@@ -0,0 +1,17 @@
+KEYMILE qrio Board Control CPLD
+
+The qrio is a multifunction device that controls the KEYMILE boards based on
+the kmp204x design.
+It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable
+GPIO blocks.
+
+Required properties:
+- compatible: "keymile,qriox"
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+ board-control@1,0 {
+ compatible = "keymile,qriox";
+ reg = <1 0 0x80>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
new file mode 100644
index 0000000000000000000000000000000000000000..db939210e29dac97e60021917f1a12fb6cc048f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
@@ -0,0 +1,54 @@
+
+IBM Akebono board device tree
+=============================
+
+The IBM Akebono board is a development board for the PPC476GTR SoC.
+
+0) The root node
+
+ Required properties:
+
+ - model : "ibm,akebono".
+ - compatible : "ibm,akebono" , "ibm,476gtr".
+
+1.a) The Secure Digital Host Controller Interface (SDHCI) node
+
+ Represent the Secure Digital Host Controller Interfaces.
+
+ Required properties:
+
+ - compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
+ - reg : should contain the SDHCI registers location and length.
+ - interrupt-parent : a phandle for the interrupt controller.
+ - interrupts : should contain the SDHCI interrupt.
+
+1.b) The Advanced Host Controller Interface (AHCI) SATA node
+
+ Represents the advanced host controller SATA interface.
+
+ Required properties:
+
+ - compatible : should be "ibm,476gtr-ahci".
+ - reg : should contain the AHCI registers location and length.
+ - interrupt-parent : a phandle for the interrupt controller.
+ - interrupts : should contain the AHCI interrupt.
+
+1.c) The FPGA node
+
+ The Akebono board stores some board information such as the revision
+ number in an FPGA which is represented by this node.
+
+ Required properties:
+
+ - compatible : should be "ibm,akebono-fpga".
+ - reg : should contain the FPGA registers location and length.
+
+1.d) The AVR node
+
+ The Akebono board has an Atmel AVR microprocessor attached to the I2C
+ bus as a power controller for the board.
+
+ Required properties:
+
+ - compatible : should be "ibm,akebono-avr".
+ - reg : should contain the I2C bus address for the AVR.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
new file mode 100644
index 0000000000000000000000000000000000000000..c737c8338705c1489f2a372fbbc202140f51b5cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
@@ -0,0 +1,19 @@
+
+ppc476gtr High Speed Serial Assist (HSTA) node
+==============================================
+
+The 476gtr SoC contains a high speed serial assist module attached
+between the plb4 and plb6 system buses to provide high speed data
+transfer between memory and system peripherals as well as support for
+PCI message signalled interrupts.
+
+Currently only the MSI support is used by Linux using the following
+device tree entries:
+
+Require properties:
+- compatible : "ibm,476gtr-hsta-msi", "ibm,hsta-msi"
+- reg : register mapping for the HSTA MSI space
+- interrupt-parent : parent controller for mapping interrupts
+- interrupts : ordered interrupt mapping for each MSI in the register
+ space. The first interrupt should be associated with a
+ register offset of 0x00, the second to 0x10, etc.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 380914e965e084c7f6f61e1444eac87bcef3dc81..700dec4774fa912b5958a2bd82c0b0c55569ae2c 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -67,3 +67,20 @@ Example:
gpio-controller;
};
};
+
+* Freescale on-board FPGA connected on I2C bus
+
+Some Freescale boards like BSC9132QDS have on board FPGA connected on
+the i2c bus.
+
+Required properties:
+- compatible: Should be a board-specific string followed by a string
+ indicating the type of FPGA. Example:
+ "fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
+- reg: Should contain the address of the FPGA
+
+Example:
+ fpga: fpga@66 {
+ compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+ reg = <0x66>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
new file mode 100644
index 0000000000000000000000000000000000000000..454da7e08acdc0fcd11826654699b03d2b54d099
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
@@ -0,0 +1,46 @@
+Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding
+
+DESCRIPTION
+
+The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure
+that enables the implementation of coherent, multicore systems.
+
+Required properties:
+
+- compatible: <string list>
+ fsl,corenet1-cf - CoreNet coherency fabric version 1.
+ Example chips: T4240, B4860
+
+ fsl,corenet2-cf - CoreNet coherency fabric version 2.
+ Example chips: P5040, P5020, P4080, P3041, P2041
+
+ fsl,corenet-cf - Used to represent the common registers
+ between CCF version 1 and CCF version 2. This compatible
+ is retained for compatibility reasons, as it was already
+ used for both CCF version 1 chips and CCF version 2
+ chips. It should be specified after either
+ "fsl,corenet1-cf" or "fsl,corenet2-cf".
+
+- reg: <prop-encoded-array>
+ A standard property. Represents the CCF registers.
+
+- interrupts: <prop-encoded-array>
+ Interrupt mapping for CCF error interrupt.
+
+- fsl,ccf-num-csdids: <u32>
+ Specifies the number of Coherency Subdomain ID Port Mapping
+ Registers that are supported by the CCF.
+
+- fsl,ccf-num-snoopids: <u32>
+ Specifies the number of Snoop ID Port Mapping Registers that
+ are supported by CCF.
+
+Example:
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
index 922c30ad90d1ff07d95e32ded8721fcecd0d269f..f8cd2397aa047819ed183dd91de4668f3ccdbd79 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -20,3 +20,14 @@ PROPERTIES
a property named fsl,eref-[CAT], where [CAT] is the abbreviated category
name with all uppercase letters converted to lowercase, indicates that
the category is supported by the implementation.
+
+ - fsl,portid-mapping
+ Usage: optional
+ Value type: <u32>
+ Definition: The Coherency Subdomain ID Port Mapping Registers and
+ Snoop ID Port Mapping registers, which are part of the CoreNet
+ Coherency fabric (CCF), provide a CoreNet Coherency Subdomain
+ ID/CoreNet Snoop ID to cpu mapping functions. Certain bits from
+ these registers should be set if the coresponding CPU should be
+ snooped. This property defines a bitmask which selects the bit
+ that should be set if this cpu should be snooped.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
index 1f5e329f756c41517bec353175c1ae0e3ae587e7..c2b2899885f226c8d3c561ca0ec054ae7fd6626d 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
@@ -34,6 +34,15 @@ Optional properties:
for legacy drivers.
- interrupt-parent : <phandle>
Phandle to interrupt controller
+- fsl,portid-mapping : <u32>
+ The Coherency Subdomain ID Port Mapping Registers and
+ Snoop ID Port Mapping registers, which are part of the
+ CoreNet Coherency fabric (CCF), provide a CoreNet
+ Coherency Subdomain ID/CoreNet Snoop ID to pamu mapping
+ functions. Certain bits from these registers should be
+ set if PAMUs should be snooped. This property defines
+ a bitmask which selects the bits that should be set if
+ PAMUs should be snooped.
Child nodes:
@@ -88,6 +97,7 @@ Example:
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x5000>;
ranges = <0 0x20000 0x5000>;
+ fsl,portid-mapping = <0xf80000>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 5261271046ce4711c4efc7be33f0e44beddb9000..4d7f3758d1b43fd1c4e938e27bd0525f667025d7 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -142,3 +142,4 @@ wm Wondermedia Technologies, Inc.
xes Extreme Engineering Solutions (X-ES)
xlnx Xilinx
zyxel ZyXEL Communications Corp.
+zarlink Zarlink Semiconductor
diff --git a/Documentation/powerpc/cpu_families.txt b/Documentation/powerpc/cpu_families.txt
new file mode 100644
index 0000000000000000000000000000000000000000..fc08e22feb1a8d3f8740340d4d1c0dc61cc15506
--- /dev/null
+++ b/Documentation/powerpc/cpu_families.txt
@@ -0,0 +1,221 @@
+CPU Families
+============
+
+This document tries to summarise some of the different cpu families that exist
+and are supported by arch/powerpc.
+
+
+Book3S (aka sPAPR)
+------------------
+
+ - Hash MMU
+ - Mix of 32 & 64 bit
+
+ +--------------+ +----------------+
+ | Old POWER | --------------> | RS64 (threads) |
+ +--------------+ +----------------+
+ |
+ |
+ v
+ +--------------+ +----------------+ +------+
+ | 601 | --------------> | 603 | ---> | e300 |
+ +--------------+ +----------------+ +------+
+ | |
+ | |
+ v v
+ +--------------+ +----------------+ +-------+
+ | 604 | | 750 (G3) | ---> | 750CX |
+ +--------------+ +----------------+ +-------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +----------------+ +-------+
+ | 620 (64 bit) | | 7400 | | 750CL |
+ +--------------+ +----------------+ +-------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +----------------+ +-------+
+ | POWER3/630 | | 7410 | | 750FX |
+ +--------------+ +----------------+ +-------+
+ | |
+ | |
+ v v
+ +--------------+ +----------------+
+ | POWER3+ | | 7450 |
+ +--------------+ +----------------+
+ | |
+ | |
+ v v
+ +--------------+ +----------------+
+ | POWER4 | | 7455 |
+ +--------------+ +----------------+
+ | |
+ | |
+ v v
+ +--------------+ +-------+ +----------------+
+ | POWER4+ | --> | 970 | | 7447 |
+ +--------------+ +-------+ +----------------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +-------+ +----------------+
+ | POWER5 | | 970FX | | 7448 |
+ +--------------+ +-------+ +----------------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +-------+ +----------------+
+ | POWER5+ | | 970MP | | e600 |
+ +--------------+ +-------+ +----------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER5++ |
+ +--------------+
+ |
+ |
+ v
+ +--------------+ +-------+
+ | POWER6 | <-?-> | Cell |
+ +--------------+ +-------+
+ |
+ |
+ v
+ +--------------+
+ | POWER7 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER7+ |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER8 |
+ +--------------+
+
+
+ +---------------+
+ | PA6T (64 bit) |
+ +---------------+
+
+
+IBM BookE
+---------
+
+ - Software loaded TLB.
+ - All 32 bit
+
+ +--------------+
+ | 401 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 403 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 405 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 440 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+ +----------------+
+ | 450 | --> | BG/P |
+ +--------------+ +----------------+
+ |
+ |
+ v
+ +--------------+
+ | 460 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 476 |
+ +--------------+
+
+
+Motorola/Freescale 8xx
+----------------------
+
+ - Software loaded with hardware assist.
+ - All 32 bit
+
+ +-------------+
+ | MPC8xx Core |
+ +-------------+
+
+
+Freescale BookE
+---------------
+
+ - Software loaded TLB.
+ - e6500 adds HW loaded indirect TLB entries.
+ - Mix of 32 & 64 bit
+
+ +--------------+
+ | e200 |
+ +--------------+
+
+
+ +--------------------------------+
+ | e500 |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e500v2 |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e500mc (Book3e) |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e5500 (64 bit) |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e6500 (HW TLB) (Multithreaded) |
+ +--------------------------------+
+
+
+IBM A2 core
+-----------
+
+ - Book3E, software loaded TLB + HW loaded indirect TLB entries.
+ - 64 bit
+
+ +--------------+ +----------------+
+ | A2 core | --> | WSP |
+ +--------------+ +----------------+
+ |
+ |
+ v
+ +--------------+
+ | BG/Q |
+ +--------------+
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e0998997943bf789cddb11967781b595850574bc..bd6dd6ed3a9f1c30b4ae508057a264348b117b3f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -453,6 +453,14 @@ config NODES_SHIFT
default "4"
depends on NEED_MULTIPLE_NODES
+config USE_PERCPU_NUMA_NODE_ID
+ def_bool y
+ depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+ def_bool y
+ depends on NUMA
+
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index ce4c68a4a8236a4feb70c2b4a7291079d519dc98..5687e299d0a5b3b58970804a04af057d3b6f64f4 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -113,8 +113,13 @@ else
endif
endif
-CFLAGS-$(CONFIG_PPC64) := -mtraceback=no -mcall-aixdesc
-CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1)
+CFLAGS-$(CONFIG_PPC64) := -mtraceback=no
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,-mcall-aixdesc)
+AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2)
+else
+CFLAGS-$(CONFIG_PPC64) += -mcall-aixdesc
+endif
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD)
@@ -153,7 +158,7 @@ CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr)
-KBUILD_AFLAGS += -Iarch/$(ARCH)
+KBUILD_AFLAGS += -Iarch/$(ARCH) $(AFLAGS-y)
KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS)
@@ -161,6 +166,11 @@ CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+ifeq ($(CONFIG_476FPE_ERR46),y)
+ KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
+ -T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
+endif
+
# No AltiVec or VSX instructions when building kernel
KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
KBUILD_CFLAGS += $(call cc-option,-mno-vsx)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index a1f8c7f1ec60138db045ae6b46b57bec62169538..426dce7ae7c4974db360c15bd6b6c9257d6564d1 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -22,8 +22,14 @@ all: $(obj)/zImage
BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -Os -msoft-float -pipe \
-fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
- -isystem $(shell $(CROSS32CC) -print-file-name=include) \
- -mbig-endian
+ -isystem $(shell $(CROSS32CC) -print-file-name=include)
+ifdef CONFIG_PPC64_BOOT_WRAPPER
+BOOTCFLAGS += -m64
+endif
+ifdef CONFIG_CPU_BIG_ENDIAN
+BOOTCFLAGS += -mbig-endian
+endif
+
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
ifdef CONFIG_DEBUG_INFO
@@ -47,6 +53,7 @@ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
@@ -86,6 +93,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
cuboot-taishan.c cuboot-katmai.c \
cuboot-warp.c cuboot-yosemite.c \
treeboot-iss4xx.c treeboot-currituck.c \
+ treeboot-akebono.c \
simpleboot.c fixed-head.S virtex.c
src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
@@ -99,6 +107,11 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
+src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
+src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELLEB) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELL_QPACE) += pseries-head.S
src-wlib := $(sort $(src-wlib-y))
src-plat := $(sort $(src-plat-y))
@@ -137,7 +150,11 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc
$(obj)/empty.c:
@touch $@
-$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
+$(obj)/zImage.lds: $(obj)/%: $(srctree)/$(src)/%.S
+ $(CROSS32CC) $(cpp_flags) -E -Wp,-MD,$(depfile) -P -Upowerpc \
+ -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
+
+$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
@@ -235,6 +252,7 @@ image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic
image-$(CONFIG_CURRITUCK) += treeImage.currituck
+image-$(CONFIG_AKEBONO) += treeImage.akebono
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 349b5530d2c4c31394cdb03080f4491fcbe047ed..9d9f6f334d3cc022f8c1ee39c30fe802863b38b0 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -6,6 +6,8 @@
*
* Copyright 2000 Paul Mackerras.
*
+ * Adapted for 64 bit little endian images by Andrew Tauferner.
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -55,36 +57,61 @@ unsigned int rpanote[N_RPA_DESCR] = {
#define ROUNDUP(len) (((len) + 3) & ~3)
-unsigned char buf[512];
+unsigned char buf[1024];
+#define ELFDATA2LSB 1
+#define ELFDATA2MSB 2
+static int e_data = ELFDATA2MSB;
+#define ELFCLASS32 1
+#define ELFCLASS64 2
+static int e_class = ELFCLASS32;
#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2))
-
-#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \
- buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \
- PUT_16BE((off) + 2, (v)))
+#define GET_32BE(off) ((GET_16BE(off) << 16U) + GET_16BE((off)+2U))
+#define GET_64BE(off) ((((unsigned long long)GET_32BE(off)) << 32ULL) + \
+ ((unsigned long long)GET_32BE((off)+4ULL)))
+#define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \
+ buf[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v)))
+#define PUT_64BE(off, v)((PUT_32BE((off), (v) >> 32L), \
+ PUT_32BE((off) + 4, (v))))
+
+#define GET_16LE(off) ((buf[off]) + (buf[(off)+1] << 8))
+#define GET_32LE(off) (GET_16LE(off) + (GET_16LE((off)+2U) << 16U))
+#define GET_64LE(off) ((unsigned long long)GET_32LE(off) + \
+ (((unsigned long long)GET_32LE((off)+4ULL)) << 32ULL))
+#define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \
+ buf[(off) + 1] = ((v) >> 8) & 0xff)
+#define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L))
+#define PUT_64LE(off, v) (PUT_32LE((off), (v)), PUT_32LE((off) + 4, (v) >> 32L))
+
+#define GET_16(off) (e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off))
+#define GET_32(off) (e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off))
+#define GET_64(off) (e_data == ELFDATA2MSB ? GET_64BE(off) : GET_64LE(off))
+#define PUT_16(off, v) (e_data == ELFDATA2MSB ? PUT_16BE(off, v) : \
+ PUT_16LE(off, v))
+#define PUT_32(off, v) (e_data == ELFDATA2MSB ? PUT_32BE(off, v) : \
+ PUT_32LE(off, v))
+#define PUT_64(off, v) (e_data == ELFDATA2MSB ? PUT_64BE(off, v) : \
+ PUT_64LE(off, v))
/* Structure of an ELF file */
#define E_IDENT 0 /* ELF header */
-#define E_PHOFF 28
-#define E_PHENTSIZE 42
-#define E_PHNUM 44
-#define E_HSIZE 52 /* size of ELF header */
+#define E_PHOFF (e_class == ELFCLASS32 ? 28 : 32)
+#define E_PHENTSIZE (e_class == ELFCLASS32 ? 42 : 54)
+#define E_PHNUM (e_class == ELFCLASS32 ? 44 : 56)
+#define E_HSIZE (e_class == ELFCLASS32 ? 52 : 64)
#define EI_MAGIC 0 /* offsets in E_IDENT area */
#define EI_CLASS 4
#define EI_DATA 5
#define PH_TYPE 0 /* ELF program header */
-#define PH_OFFSET 4
-#define PH_FILESZ 16
-#define PH_HSIZE 32 /* size of program header */
+#define PH_OFFSET (e_class == ELFCLASS32 ? 4 : 8)
+#define PH_FILESZ (e_class == ELFCLASS32 ? 16 : 32)
+#define PH_HSIZE (e_class == ELFCLASS32 ? 32 : 56)
#define PT_NOTE 4 /* Program header type = note */
-#define ELFCLASS32 1
-#define ELFDATA2MSB 2
unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
@@ -92,8 +119,8 @@ int
main(int ac, char **av)
{
int fd, n, i;
- int ph, ps, np;
- int nnote, nnote2, ns;
+ unsigned long ph, ps, np;
+ long nnote, nnote2, ns;
if (ac != 2) {
fprintf(stderr, "Usage: %s elf-file\n", av[0]);
@@ -114,26 +141,27 @@ main(int ac, char **av)
exit(1);
}
- if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+ if (memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+ goto notelf;
+ e_class = buf[E_IDENT+EI_CLASS];
+ if (e_class != ELFCLASS32 && e_class != ELFCLASS64)
+ goto notelf;
+ e_data = buf[E_IDENT+EI_DATA];
+ if (e_data != ELFDATA2MSB && e_data != ELFDATA2LSB)
+ goto notelf;
+ if (n < E_HSIZE)
goto notelf;
- if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
- || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
- fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
- av[1]);
- exit(1);
- }
-
- ph = GET_32BE(E_PHOFF);
- ps = GET_16BE(E_PHENTSIZE);
- np = GET_16BE(E_PHNUM);
+ ph = (e_class == ELFCLASS32 ? GET_32(E_PHOFF) : GET_64(E_PHOFF));
+ ps = GET_16(E_PHENTSIZE);
+ np = GET_16(E_PHNUM);
if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
goto notelf;
if (ph + (np + 2) * ps + nnote + nnote2 > n)
goto nospace;
for (i = 0; i < np; ++i) {
- if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
+ if (GET_32(ph + PH_TYPE) == PT_NOTE) {
fprintf(stderr, "%s already has a note entry\n",
av[1]);
exit(0);
@@ -148,15 +176,22 @@ main(int ac, char **av)
/* fill in the program header entry */
ns = ph + 2 * ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote);
+ PUT_32(ph + PH_TYPE, PT_NOTE);
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_OFFSET, ns);
+ else
+ PUT_64(ph + PH_OFFSET, ns);
+
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_FILESZ, nnote);
+ else
+ PUT_64(ph + PH_FILESZ, nnote);
/* fill in the note area we point to */
/* XXX we should probably make this a proper section */
- PUT_32BE(ns, strlen(arch) + 1);
- PUT_32BE(ns + 4, N_DESCR * 4);
- PUT_32BE(ns + 8, 0x1275);
+ PUT_32(ns, strlen(arch) + 1);
+ PUT_32(ns + 4, N_DESCR * 4);
+ PUT_32(ns + 8, 0x1275);
strcpy((char *) &buf[ns + 12], arch);
ns += 12 + strlen(arch) + 1;
for (i = 0; i < N_DESCR; ++i, ns += 4)
@@ -164,21 +199,28 @@ main(int ac, char **av)
/* fill in the second program header entry and the RPA note area */
ph += ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote2);
+ PUT_32(ph + PH_TYPE, PT_NOTE);
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_OFFSET, ns);
+ else
+ PUT_64(ph + PH_OFFSET, ns);
+
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_FILESZ, nnote);
+ else
+ PUT_64(ph + PH_FILESZ, nnote2);
/* fill in the note area we point to */
- PUT_32BE(ns, strlen(rpaname) + 1);
- PUT_32BE(ns + 4, sizeof(rpanote));
- PUT_32BE(ns + 8, 0x12759999);
+ PUT_32(ns, strlen(rpaname) + 1);
+ PUT_32(ns + 4, sizeof(rpanote));
+ PUT_32(ns + 8, 0x12759999);
strcpy((char *) &buf[ns + 12], rpaname);
ns += 12 + ROUNDUP(strlen(rpaname) + 1);
for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
PUT_32BE(ns, rpanote[i]);
/* Update the number of program headers */
- PUT_16BE(E_PHNUM, np + 2);
+ PUT_16(E_PHNUM, np + 2);
/* write back */
lseek(fd, (long) 0, SEEK_SET);
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 0f7428a37efbeb247d63686d627ba260c7c03337..14de4f8778a7fa36ff1e0bfb1b49641913ee05a8 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -1,17 +1,20 @@
/*
* Copyright (C) Paul Mackerras 1997.
*
+ * Adapted for 64 bit LE PowerPC by Andrew Tauferner
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * NOTE: this code runs in 32 bit mode, is position-independent,
- * and is packaged as ELF32.
*/
#include "ppc_asm.h"
+RELA = 7
+RELACOUNT = 0x6ffffff9
+
.text
/* A procedure descriptor used when booting this as a COFF file.
* When making COFF, this comes first in the link and we're
@@ -21,6 +24,20 @@
_zimage_start_opd:
.long 0x500000, 0, 0, 0
+#ifdef __powerpc64__
+.balign 8
+p_start: .llong _start
+p_etext: .llong _etext
+p_bss_start: .llong __bss_start
+p_end: .llong _end
+
+p_toc: .llong __toc_start + 0x8000 - p_base
+p_dyn: .llong __dynamic_start - p_base
+p_rela: .llong __rela_dyn_start - p_base
+p_prom: .llong 0
+ .weak _platform_stack_top
+p_pstack: .llong _platform_stack_top
+#else
p_start: .long _start
p_etext: .long _etext
p_bss_start: .long __bss_start
@@ -28,6 +45,7 @@ p_end: .long _end
.weak _platform_stack_top
p_pstack: .long _platform_stack_top
+#endif
.weak _zimage_start
.globl _zimage_start
@@ -38,6 +56,7 @@ _zimage_start_lib:
and the address where we're running. */
bl .+4
p_base: mflr r10 /* r10 now points to runtime addr of p_base */
+#ifndef __powerpc64__
/* grab the link address of the dynamic section in r11 */
addis r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
lwz r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
@@ -51,8 +70,6 @@ p_base: mflr r10 /* r10 now points to runtime addr of p_base */
/* The dynamic section contains a series of tagged entries.
* We need the RELA and RELACOUNT entries. */
-RELA = 7
-RELACOUNT = 0x6ffffff9
li r9,0
li r0,0
9: lwz r8,0(r12) /* get tag */
@@ -120,9 +137,164 @@ RELACOUNT = 0x6ffffff9
li r0,0
stwu r0,-16(r1) /* establish a stack frame */
6:
+#else /* __powerpc64__ */
+ /* Save the prom pointer at p_prom. */
+ std r5,(p_prom-p_base)(r10)
+
+ /* Set r2 to the TOC. */
+ ld r2,(p_toc-p_base)(r10)
+ add r2,r2,r10
+
+ /* Grab the link address of the dynamic section in r11. */
+ ld r11,-32768(r2)
+ cmpwi r11,0
+ beq 3f /* if not linked -pie then no dynamic section */
+
+ ld r11,(p_dyn-p_base)(r10)
+ add r11,r11,r10
+ ld r9,(p_rela-p_base)(r10)
+ add r9,r9,r10
+ li r7,0
+ li r8,0
+9: ld r6,0(r11) /* get tag */
+ cmpdi r6,0
+ beq 12f /* end of list */
+ cmpdi r6,RELA
+ bne 10f
+ ld r7,8(r11) /* get RELA pointer in r7 */
+ b 11f
+10: addis r6,r6,(-RELACOUNT)@ha
+ cmpdi r6,RELACOUNT@l
+ bne 11f
+ ld r8,8(r11) /* get RELACOUNT value in r8 */
+11: addi r11,r11,16
+ b 9b
+12:
+ cmpdi r7,0 /* check we have both RELA and RELACOUNT */
+ cmpdi cr1,r8,0
+ beq 3f
+ beq cr1,3f
+
+ /* Calcuate the runtime offset. */
+ subf r7,r7,r9
+
+ /* Run through the list of relocations and process the
+ * R_PPC64_RELATIVE ones. */
+ mtctr r8
+13: ld r0,8(r9) /* ELF64_R_TYPE(reloc->r_info) */
+ cmpdi r0,22 /* R_PPC64_RELATIVE */
+ bne 3f
+ ld r6,0(r9) /* reloc->r_offset */
+ ld r0,16(r9) /* reloc->r_addend */
+ add r0,r0,r7
+ stdx r0,r7,r6
+ addi r9,r9,24
+ bdnz 13b
+
+ /* Do a cache flush for our text, in case the loader didn't */
+3: ld r9,p_start-p_base(r10) /* note: these are relocated now */
+ ld r8,p_etext-p_base(r10)
+4: dcbf r0,r9
+ icbi r0,r9
+ addi r9,r9,0x20
+ cmpld cr0,r9,r8
+ blt 4b
+ sync
+ isync
+
+ /* Clear the BSS */
+ ld r9,p_bss_start-p_base(r10)
+ ld r8,p_end-p_base(r10)
+ li r0,0
+5: std r0,0(r9)
+ addi r9,r9,8
+ cmpld cr0,r9,r8
+ blt 5b
+
+ /* Possibly set up a custom stack */
+ ld r8,p_pstack-p_base(r10)
+ cmpdi r8,0
+ beq 6f
+ ld r1,0(r8)
+ li r0,0
+ stdu r0,-16(r1) /* establish a stack frame */
+6:
+#endif /* __powerpc64__ */
/* Call platform_init() */
bl platform_init
/* Call start */
b start
+
+#ifdef __powerpc64__
+
+#define PROM_FRAME_SIZE 512
+#define SAVE_GPR(n, base) std n,8*(n)(base)
+#define REST_GPR(n, base) ld n,8*(n)(base)
+#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+/* prom handles the jump into and return from firmware. The prom args pointer
+ is loaded in r3. */
+.globl prom
+prom:
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
+
+ SAVE_GPR(2, r1)
+ SAVE_GPR(13, r1)
+ SAVE_8GPRS(14, r1)
+ SAVE_10GPRS(22, r1)
+ mfcr r10
+ std r10,8*32(r1)
+ mfmsr r10
+ std r10,8*33(r1)
+
+ /* remove MSR_LE from msr but keep MSR_SF */
+ mfmsr r10
+ rldicr r10,r10,0,62
+ mtsrr1 r10
+
+ /* Load FW address, set LR to label 1, and jump to FW */
+ bl 0f
+0: mflr r10
+ addi r11,r10,(1f-0b)
+ mtlr r11
+
+ ld r10,(p_prom-0b)(r10)
+ mtsrr0 r10
+
+ rfid
+
+1: /* Return from OF */
+ FIXUP_ENDIAN
+
+ /* Restore registers and return. */
+ rldicl r1,r1,0,32
+
+ /* Restore the MSR (back to 64 bits) */
+ ld r10,8*(33)(r1)
+ mtmsr r10
+ isync
+
+ /* Restore other registers */
+ REST_GPR(2, r1)
+ REST_GPR(13, r1)
+ REST_8GPRS(14, r1)
+ REST_10GPRS(22, r1)
+ ld r10,8*32(r1)
+ mtcr r10
+
+ addi r1,r1,PROM_FRAME_SIZE
+ ld r0,16(r1)
+ mtlr r0
+ blr
+#endif
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index cc73f7a95e26c488b5afabc1b6691d9f7456920a..bf8f4ede192851249bbc6b1a2b0114072ead5d3f 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -15,6 +15,10 @@
asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
rval; \
})
+#define mtdcrx(rn, val) \
+ ({ \
+ asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \
+ })
/* 440GP/440GX SDRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010
diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
new file mode 100644
index 0000000000000000000000000000000000000000..f92ecfed3d2f6c6f7ffe3cbb7ca5a55c4e2f8773
--- /dev/null
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -0,0 +1,415 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000; // spin table
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "ibm,akebono";
+ compatible = "ibm,akebono", "ibm,476gtr";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <0>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <1>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x01f00000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00040000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ single-cpu-affinity;
+ };
+
+ plb {
+ compatible = "ibm,plb6";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-frequency = <200000000>; // 200Mhz
+
+ HSTA0: hsta@310000e0000 {
+ compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
+ reg = <0x310 0x000e0000 0x0 0xf0>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <108 0
+ 109 0
+ 110 0
+ 111 0
+ 112 0
+ 113 0
+ 114 0
+ 115 0
+ 116 0
+ 117 0
+ 118 0
+ 119 0
+ 120 0
+ 121 0
+ 122 0
+ 123 0>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
+ dcr-reg = <0xc0000000 0x062>;
+ num-tx-chans = <1>;
+ num-rx-chans = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&MPIC>;
+ interrupts = < /*TXEOB*/ 77 0x4
+ /*RXEOB*/ 78 0x4
+ /*SERR*/ 76 0x4
+ /*TXDE*/ 79 0x4
+ /*RXDE*/ 80 0x4>;
+ };
+
+ SATA0: sata@30000010000 {
+ compatible = "ibm,476gtr-ahci";
+ reg = <0x300 0x00010000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <93 2>;
+ };
+
+ EHCI0: ehci@30010000000 {
+ compatible = "ibm,476gtr-ehci", "generic-ehci";
+ reg = <0x300 0x10000000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <85 2>;
+ };
+
+ SD0: sd@30000000000 {
+ compatible = "ibm,476gtr-sdhci", "generic-sdhci";
+ reg = <0x300 0x00000000 0x0 0x10000>;
+ interrupts = <91 2>;
+ interrupt-parent = <&MPIC>;
+ };
+
+ OHCI0: ohci@30010010000 {
+ compatible = "ibm,476gtr-ohci", "generic-ohci";
+ reg = <0x300 0x10010000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <89 1>;
+ };
+
+ OHCI1: ohci@30010020000 {
+ compatible = "ibm,476gtr-ohci", "generic-ohci";
+ reg = <0x300 0x10020000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <88 1>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full
+ * 32-bit range
+ */
+ ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
+ 0x80000000 0x0000033f 0x80000000 0x80000000>;
+ clock-frequency = <100000000>;
+
+ RGMII0: emac-rgmii-wol@50004 {
+ compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
+ reg = <0x50004 0x00000008>;
+ has-mdio;
+ };
+
+ EMAC0: ethernet@30000 {
+ device_type = "network";
+ compatible = "ibm,emac-476gtr", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
+ /*Wake*/ 0x1 &MPIC 82 0x4>;
+ reg = <0x30000 0x78>;
+
+ /* local-mac-address will normally be added by
+ * the wrapper. If your device doesn't support
+ * passing data to the wrapper (in the form
+ * local-mac-addr=<hwaddr>) then you will need
+ * to set it manually here. */
+ //local-mac-address = [000000000000];
+
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-wol-device = <&RGMII0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ UART0: serial@10000 {
+ device_type = "serial";
+ compatible = "ns16750", "ns16550";
+ reg = <0x10000 0x00000008>;
+ virtual-reg = <0xe8010000>;
+ clock-frequency = <1851851>;
+ current-speed = <38400>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <39 2>;
+ };
+
+ IIC0: i2c@00000000 {
+ compatible = "ibm,iic-476gtr", "ibm,iic";
+ reg = <0x0 0x00000020>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <37 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80", "m41st85";
+ reg = <0x68>;
+ };
+ };
+
+ IIC1: i2c@00000100 {
+ compatible = "ibm,iic-476gtr", "ibm,iic";
+ reg = <0x100 0x00000020>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <38 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ avr@58 {
+ compatible = "ibm,akebono-avr";
+ reg = <0x58>;
+ };
+ };
+
+ FPGA0: fpga@ebc00000 {
+ compatible = "ibm,akebono-fpga";
+ reg = <0xebc00000 0x8>;
+ };
+ };
+
+ PCIE0: pciex@10100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xc0 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
+ };
+
+ PCIE1: pciex@20100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x00000201 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000200 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x100 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000240 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
+ };
+
+ PCIE2: pciex@18100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x00000181 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000180 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xe0 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000001c0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
+ };
+
+ PCIE3: pciex@28100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x3>; /* port number */
+ reg = <0x00000281 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000280 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x120 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000002c0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = &UART0;
+ };
+};
diff --git a/arch/powerpc/boot/dts/b4860emu.dts b/arch/powerpc/boot/dts/b4860emu.dts
index 7290021f2dfc0361a84913e9f4a95634ab3854ae..85646b4f96e154d3356fc519068529d8514f5020 100644
--- a/arch/powerpc/boot/dts/b4860emu.dts
+++ b/arch/powerpc/boot/dts/b4860emu.dts
@@ -61,21 +61,25 @@
device_type = "cpu";
reg = <0 1>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
};
};
@@ -157,7 +161,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,b4-corenet-cf";
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 0>;
fsl,ccf-num-csdids = <32>;
@@ -167,6 +171,7 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
+ fsl,portid-mapping = <0x8000>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts
new file mode 100644
index 0000000000000000000000000000000000000000..6cab1062bc74a4032c54bdd63bdcd5a73f6c83df
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9132qds.dts
@@ -0,0 +1,35 @@
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9132si-pre.dtsi"
+
+/ {
+ model = "fsl,bsc9132qds";
+ compatible = "fsl,bsc9132qds";
+
+ memory {
+ device_type = "memory";
+ };
+
+ ifc: ifc@ff71e000 {
+ /* NOR, NAND Flash on board */
+ ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+ 0x1 0x0 0x0 0xff800000 0x00010000>;
+ reg = <0x0 0xff71e000 0x0 0x2000>;
+ };
+
+ soc: soc@ff700000 {
+ ranges = <0x0 0x0 0xff700000 0x100000>;
+ };
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "fsl/bsc9132si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..af8e88830221cdab102b534acc502e7979f9a39b
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi
@@ -0,0 +1,101 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x4000>;
+ };
+};
+
+&soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ };
+ };
+
+ i2c@3000 {
+ fpga: fpga@66 {
+ compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+ reg = <0x66>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
index 60566f9927be576de6797accfc578f6b1e5fd7ad..d67894459ac8dc00ec7d9c5c793af7f44271387c 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -76,10 +76,6 @@
compatible = "fsl,b4420-l3-cache-controller", "cache";
};
- corenet-cf@18000 {
- compatible = "fsl,b4420-corenet-cf";
- };
-
guts: global-utilities@e0000 {
compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 2419731c2c5443b35c1f6edde0f89808fc7bbef6..338af7e39dd9587d867a3c59ae11192ed1c7f3f1 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -66,12 +66,14 @@
reg = <0 1>;
clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index cbc354b05117344342bab0d839749e19a0f2b832..582381dba1d76dede51611a110ed642a9c990330 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -120,10 +120,6 @@
compatible = "fsl,b4860-l3-cache-controller", "cache";
};
- corenet-cf@18000 {
- compatible = "fsl,b4860-corenet-cf";
- };
-
guts: global-utilities@e0000 {
compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 142ac862cacfd2b1362ebf508ca9e11f9237fb3e..1948f73fd26b0d65c4955dac885166ef537cd917 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -66,24 +66,28 @@
reg = <0 1>;
clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 4f6e48277c46170bb806bbb17e41c2887de4054f..1a54ba71f6852e1925376eba5fec5825098141dd 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -158,7 +158,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,b4-corenet-cf";
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 0>;
fsl,ccf-num-csdids = <32>;
@@ -168,6 +168,7 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
+ fsl,portid-mapping = <0x8000>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..c72307198140564034a6348a170fad62878c95d4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
@@ -0,0 +1,185 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ /* FIXME: Test whether interrupts are split */
+ interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,bsc9132-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,bsc9132-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 1 8>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+ i2c@3000 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-i2c-1.dtsi"
+ i2c@3100 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-duart-0.dtsi"
+ serial0: serial@4500 {
+ interrupts = <18 2 0 0>;
+ };
+
+ serial1: serial@4600 {
+ interrupts = <18 2 0 0 >;
+ };
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ interrupts = <22 0x2 0 0>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ interrupts = <19 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,bsc9132-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 1 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+ dma-channel@0 {
+ interrupts = <62 2 0 0>;
+ };
+
+ dma-channel@80 {
+ interrupts = <63 2 0 0>;
+ };
+
+ dma-channel@100 {
+ interrupts = <64 2 0 0>;
+ };
+
+ dma-channel@180 {
+ interrupts = <65 2 0 0>;
+ };
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+ compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+ interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ interrupts = <41 0x2 0 0>;
+ };
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+ interrupts = <57 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ interrupts = <58 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ interrupts = <59 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ interrupts = <60 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ interrupts = <61 2 0 0>;
+ };
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+ };
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+ };
+};
+
+global-utilities@e0000 {
+ compatible = "fsl,bsc9132-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..301a9dba579067370b9d4217860cf1dbc1d0e4c9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500v2@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu1: PowerPC,e500v2@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index e2987a33083cbbeb51b5d66984f2508e740759d7..5290df83ff30e5f2a6254696b988d00bd0cc8143 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -246,7 +246,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -262,6 +262,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x0f000000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index 22f3b14517de83fc5f4c891d06eed37fb762cb68..b1ea147f29951638de8f10a5114ae13efc20c3f1 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -83,6 +83,7 @@
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -92,6 +93,7 @@
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -101,6 +103,7 @@
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -110,6 +113,7 @@
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 7af6d45fd998b6470a94e198855772e9d5313d5d..cd63cb1b10421ec63f74fd2a06d12d133cf8baed 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -273,7 +273,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -289,6 +289,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x0f000000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index 468e8be8ac6f82cc40c149fb50edab9baf5260d5..dc5f4b362c24b5149e3a3655e7264b3a76b62fb1 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -84,6 +84,7 @@
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -93,6 +94,7 @@
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -102,6 +104,7 @@
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -111,6 +114,7 @@
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 2415e1f1d3fafe6801020bbbf62d200bf8e47581..12947ccddf259c35962270a65e086d501b2d66b1 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -281,7 +281,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -297,6 +297,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x00f80000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 0040b5a5379e2de22819988902e26b5e5f94dde2..38bde09586729168dfe11f03783f4707483ad1cd 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -83,6 +83,7 @@
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -92,6 +93,7 @@
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -101,6 +103,7 @@
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -110,6 +113,7 @@
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
@@ -119,6 +123,7 @@
reg = <4>;
clocks = <&mux4>;
next-level-cache = <&L2_4>;
+ fsl,portid-mapping = <0x08000000>;
L2_4: l2-cache {
next-level-cache = <&cpc>;
};
@@ -128,6 +133,7 @@
reg = <5>;
clocks = <&mux5>;
next-level-cache = <&L2_5>;
+ fsl,portid-mapping = <0x04000000>;
L2_5: l2-cache {
next-level-cache = <&cpc>;
};
@@ -137,6 +143,7 @@
reg = <6>;
clocks = <&mux6>;
next-level-cache = <&L2_6>;
+ fsl,portid-mapping = <0x02000000>;
L2_6: l2-cache {
next-level-cache = <&cpc>;
};
@@ -146,6 +153,7 @@
reg = <7>;
clocks = <&mux7>;
next-level-cache = <&L2_7>;
+ fsl,portid-mapping = <0x01000000>;
L2_7: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 2985de4ad6bec72d0d28331e88558bf1c5cbd58d..4c4a2b0436b2d8cdaa96377fb96f4384fcc5d5fd 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -278,7 +278,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -294,6 +294,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x3c000000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index fe1a2e6613b49b8c116d65763e79f160e023b9e3..1cc61e126e4cc65fd01ee600c76998f92ccfa845 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -90,6 +90,7 @@
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -99,6 +100,7 @@
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 546a899efe20eca6ec44bade2d2df2831e95d7f3..67296fdd9698937a232eb0843ec33f8025d14e68 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -233,7 +233,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -248,6 +248,7 @@
#size-cells = <1>;
interrupts = <24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x0f800000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index 3674686687cbfd24066b53debf34111ab63125c7..b048a2be05a8d707c82f793cdfbaa3ffa1888674 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -83,6 +83,7 @@
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -92,6 +93,7 @@
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -101,6 +103,7 @@
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -110,6 +113,7 @@
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..12e597eea3c8a69e89d971647211681ab9e63ec3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -0,0 +1,430 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <20 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <20 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+&pci1 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ interrupts = <21 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <21 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+&pci2 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <22 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <22 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&pci3 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <23 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <23 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+ reg = <0x1000 0x1000 0x1002000 0x10000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0x1A000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-snpc@30000 {
+ compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+ reg = <0x30000 0x1000 0x1022000 0x10000>;
+ };
+ dcsr-snpc@31000 {
+ compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+ reg = <0x31000 0x1000 0x1042000 0x10000>;
+ };
+ dcsr-cpu-sb-proxy@100000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x100000 0x1000 0x101000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@108000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x108000 0x1000 0x109000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@110000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x110000 0x1000 0x111000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@118000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x118000 0x1000 0x119000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <16>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v5.0",
+ "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,t1040-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x1000>;
+ ranges = <0 0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <128 1>;
+ fsl,secondary-cache-geometry = <16 2>;
+ };
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ fsl,liodn-bits = <12>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ reg = <0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-2.0";
+ clock-output-names = "sysclk", "fixed-clock";
+ };
+
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll1-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll1-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux1";
+ };
+
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll1-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux2";
+ };
+
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux3";
+ };
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
+ reg = <0xe2000 0x1000>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,t1040-sfp";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,t1040-serdes";
+ reg = <0xea000 0x4000>;
+ };
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+ sdhci,auto-cmd12;
+ };
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ phy_type = "utmi";
+ port0;
+ };
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+ display@180000 {
+ compatible = "fsl,t1040-diu", "fsl,diu";
+ reg = <0x180000 1000>;
+ interrupts = <74 2 0 0>;
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+/include/ "qoriq-sec5.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..319b74f29724fa733bc2d800b2c2a0e8fa48508c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..bbb7025ca9c2aea58162ba148c542457c81eb24e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -0,0 +1,104 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ sdhc = &sdhc;
+
+ crypto = &crypto;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&mux0>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&mux1>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e5500@2 {
+ device_type = "cpu";
+ reg = <2>;
+ clocks = <&mux2>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e5500@3 {
+ device_type = "cpu";
+ reg = <3>;
+ clocks = <&mux3>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index f99d74ff11b4f95cf3a312b1aa7645c6df6c24a9..793669baa13e08b81cfea8790ece2ff3c3f4155e 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -343,7 +343,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -353,6 +353,7 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x6000>;
+ fsl,portid-mapping = <0x8000>;
interrupts = <
24 2 0 0
16 2 1 30>;
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index 0b8ccc5b4a46575088acd599a01fd0aef3909d98..d2f157edbe81c57e3f16f19cd06839b8b20cac2a 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -69,72 +69,84 @@
reg = <0 1>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu4: PowerPC,e6500@8 {
device_type = "cpu";
reg = <8 9>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu5: PowerPC,e6500@10 {
device_type = "cpu";
reg = <10 11>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu6: PowerPC,e6500@12 {
device_type = "cpu";
reg = <12 13>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu7: PowerPC,e6500@14 {
device_type = "cpu";
reg = <14 15>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu8: PowerPC,e6500@16 {
device_type = "cpu";
reg = <16 17>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu9: PowerPC,e6500@18 {
device_type = "cpu";
reg = <18 19>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu10: PowerPC,e6500@20 {
device_type = "cpu";
reg = <20 21>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu11: PowerPC,e6500@22 {
device_type = "cpu";
reg = <22 23>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/kmcoge4.dts
new file mode 100644
index 0000000000000000000000000000000000000000..89b4119f3b19c48d9990da20888d5d5d6b08eff1
--- /dev/null
+++ b/arch/powerpc/boot/dts/kmcoge4.dts
@@ -0,0 +1,152 @@
+/*
+ * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
+ *
+ * (C) Copyright 2014
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p2041si-pre.dtsi"
+
+/ {
+ model = "keymile,kmcoge4";
+ compatible = "keymile,kmcoge4", "keymile,kmp204x";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl256s1";
+ reg = <0>;
+ spi-max-frequency = <20000000>; /* input clock */
+ };
+
+ network_clock@1 {
+ compatible = "zarlink,zl30343";
+ reg = <1>;
+ spi-max-frequency = <8000000>;
+ };
+
+ flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,m25p32";
+ reg = <2>;
+ spi-max-frequency = <15000000>;
+ };
+ };
+
+ i2c@119000 {
+ status = "disabled";
+ };
+
+ i2c@119100 {
+ status = "disabled";
+ };
+
+ usb0: usb@210000 {
+ status = "disabled";
+ };
+
+ usb1: usb@211000 {
+ status = "disabled";
+ };
+
+ sata@220000 {
+ status = "disabled";
+ };
+
+ sata@221000 {
+ status = "disabled";
+ };
+ };
+
+ rio: rapidio@ffe0c0000 {
+ status = "disabled";
+ };
+
+ lbc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */
+ 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */
+ 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */
+ 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */
+
+ nand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0 0 0x40000>;
+ };
+
+ board-control@1,0 {
+ compatible = "keymile,qriox";
+ reg = <1 0 0x80>;
+ };
+
+ chassis-mgmt@3,0 {
+ compatible = "keymile,bfticu";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <3 0 0x100>;
+ interrupt-parent = <&mpic>;
+ interrupts = <6 1 0 0>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ reg = <0xf 0xfe200000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ status = "disabled";
+ };
+
+ pci2: pcie@ffe202000 {
+ reg = <0xf 0xfe202000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/oca4080.dts
new file mode 100644
index 0000000000000000000000000000000000000000..3d4c751d1608fe4d2c2428d1b11efabf709fb2cc
--- /dev/null
+++ b/arch/powerpc/boot/dts/oca4080.dts
@@ -0,0 +1,118 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p4080si-pre.dtsi"
+
+/ {
+ model = "fsl,OCA4080";
+ compatible = "fsl,OCA4080";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ i2c@118000 {
+ status = "disabled";
+ };
+
+ i2c@118100 {
+ status = "disabled";
+ };
+
+ i2c@119000 {
+ status = "disabled";
+ };
+
+ i2c@119100 {
+ status = "disabled";
+ };
+
+ usb0: usb@210000 {
+ status = "disabled";
+ };
+
+ usb1: usb@211000 {
+ status = "disabled";
+ };
+ };
+
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xef800000 0x800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe201000 {
+ status = "disabled";
+ };
+
+ pci2: pcie@ffe202000 {
+ status = "disabled";
+ };
+};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
deleted file mode 100644
index beb6cb12e59dc1eaa041975769613a69346d1a81..0000000000000000000000000000000000000000
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * P1023 RDS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Author: Roy Zang <tie-fei.zang@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1023si-pre.dtsi"
-
-/ {
- model = "fsl,P1023";
- compatible = "fsl,P1023RDS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- memory {
- device_type = "memory";
- };
-
- soc: soc@ff600000 {
- ranges = <0x0 0x0 0xff600000 0x200000>;
-
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
- fsl_dataflash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db081d";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@u-boot {
- /* 512KB for u-boot Bootloader Image */
- label = "u-boot-spi";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
- partition@dtb {
- /* 512KB for DTB Image */
- label = "dtb-spi";
- reg = <0x00080000 0x00080000>;
- read-only;
- };
- };
- };
-
- usb@22000 {
- dr_mode = "host";
- phy_type = "ulpi";
- };
- };
-
- lbc: localbus@ff605000 {
- reg = <0 0xff605000 0 0x1000>;
-
- /* NOR Flash, BCSR */
- ranges = <0x0 0x0 0x0 0xee000000 0x02000000
- 0x1 0x0 0x0 0xe0000000 0x00008000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x02000000>;
- bank-width = <2>;
- device-width = <1>;
- partition@0 {
- label = "ramdisk";
- reg = <0x00000000 0x01c00000>;
- };
- partition@1c00000 {
- label = "kernel";
- reg = <0x01c00000 0x002e0000>;
- };
- partiton@1ee0000 {
- label = "dtb";
- reg = <0x01ee0000 0x00020000>;
- };
- partition@1f00000 {
- label = "firmware";
- reg = <0x01f00000 0x00080000>;
- read-only;
- };
- partition@1f80000 {
- label = "u-boot";
- reg = <0x01f80000 0x00080000>;
- read-only;
- };
- };
-
- fpga@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1023rds-fpga";
- reg = <1 0 0x8000>;
- ranges = <0 1 0 0x8000>;
-
- bcsr@20 {
- compatible = "fsl,p1023rds-bcsr";
- reg = <0x20 0x20>;
- };
- };
- };
-
- pci0: pcie@ff60a000 {
- reg = <0 0xff60a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- pcie@0 {
- /* IRQ[0:3] are pulled up on board, set to active-low */
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- board_pci1: pci1: pcie@ff609000 {
- reg = <0 0xff609000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- pcie@0 {
- /*
- * IRQ[4:6] only for PCIe, set to active-high,
- * IRQ[7] is pulled up on board, set to active-low
- */
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 2 0 0
- 0000 0 0 2 &mpic 5 2 0 0
- 0000 0 0 3 &mpic 6 2 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci2: pcie@ff60b000 {
- reg = <0 0xff60b000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- pcie@0 {
- /*
- * IRQ[8:10] are pulled up on board, set to active-low
- * IRQ[11] only for PCIe, set to active-high,
- */
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 2 0 0
- >;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "fsl/p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1040qds.dts b/arch/powerpc/boot/dts/t1040qds.dts
new file mode 100644
index 0000000000000000000000000000000000000000..973c29c2f56e11fca1d17364ca6f01eedb68de65
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1040qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+ model = "fsl,T1040QDS";
+ compatible = "fsl,T1040QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042qds.dts b/arch/powerpc/boot/dts/t1042qds.dts
new file mode 100644
index 0000000000000000000000000000000000000000..45bd0375215421b7c85928f387c24c5aa86747c7
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1042qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1042QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+ model = "fsl,T1042QDS";
+ compatible = "fsl,T1042QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t104xqds.dtsi b/arch/powerpc/boot/dts/t104xqds.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..234f4b596c5b3e5f6b717c7f289e65ac03168155
--- /dev/null
+++ b/arch/powerpc/boot/dts/t104xqds.dtsi
@@ -0,0 +1,166 @@
+/*
+ * T104xQDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+ model = "fsl,T1040QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ ifc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x2000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xff800000 0x00010000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,fpga-qixis";
+ reg = <3 0 0x300>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11";
+ reg = <0>;
+ spi-max-frequency = <10000000>; /* input clock */
+ };
+ };
+
+ i2c@118000 {
+ pca9547@77 {
+ compatible = "philips,pca9547";
+ reg = <0x77>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0x1 0x1 0 0>;
+ };
+ };
+ };
+
+ pci0: pcie@ffe240000 {
+ reg = <0xf 0xfe240000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe250000 {
+ reg = <0xf 0xfe250000 0 0x10000>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe260000 {
+ reg = <0xf 0xfe260000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci3: pcie@ffe270000 {
+ reg = <0xf 0xfe270000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/t4240emu.dts b/arch/powerpc/boot/dts/t4240emu.dts
index ee24ab335598092da00863590dfc7052767fb3be..bc12127a03fbfe339b882496a89cfdbafcedfdbb 100644
--- a/arch/powerpc/boot/dts/t4240emu.dts
+++ b/arch/powerpc/boot/dts/t4240emu.dts
@@ -60,63 +60,75 @@
device_type = "cpu";
reg = <0 1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu4: PowerPC,e6500@8 {
device_type = "cpu";
reg = <8 9>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu5: PowerPC,e6500@10 {
device_type = "cpu";
reg = <10 11>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu6: PowerPC,e6500@12 {
device_type = "cpu";
reg = <12 13>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu7: PowerPC,e6500@14 {
device_type = "cpu";
reg = <14 15>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu8: PowerPC,e6500@16 {
device_type = "cpu";
reg = <16 17>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu9: PowerPC,e6500@18 {
device_type = "cpu";
reg = <18 19>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu10: PowerPC,e6500@20 {
device_type = "cpu";
reg = <20 21>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu11: PowerPC,e6500@22 {
device_type = "cpu";
reg = <22 23>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
};
};
@@ -213,7 +225,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -223,6 +235,7 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x6000>;
+ fsl,portid-mapping = <0x8000>;
interrupts = <
24 2 0 0
16 2 1 30>;
diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c
index 1567a0c0f05c6639a96ce4947dfb9bdf23eda8fc..316552dea4d8c20e5b279ecde40f8d1e81ffee37 100644
--- a/arch/powerpc/boot/elf_util.c
+++ b/arch/powerpc/boot/elf_util.c
@@ -26,7 +26,11 @@ int parse_elf64(void *hdr, struct elf_info *info)
elf64->e_ident[EI_MAG2] == ELFMAG2 &&
elf64->e_ident[EI_MAG3] == ELFMAG3 &&
elf64->e_ident[EI_CLASS] == ELFCLASS64 &&
+#ifdef __LITTLE_ENDIAN__
+ elf64->e_ident[EI_DATA] == ELFDATA2LSB &&
+#else
elf64->e_ident[EI_DATA] == ELFDATA2MSB &&
+#endif
(elf64->e_type == ET_EXEC ||
elf64->e_type == ET_DYN) &&
elf64->e_machine == EM_PPC64))
diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c
index 62e2f43ec1df1144d3a790e1f3cf3e3263fdca47..7ca910cb2fc64f0ad8fa85ed2f5b056495773324 100644
--- a/arch/powerpc/boot/of.c
+++ b/arch/powerpc/boot/of.c
@@ -40,8 +40,8 @@ static void *of_try_claim(unsigned long size)
#ifdef DEBUG
printf(" trying: 0x%08lx\n\r", claim_base);
#endif
- addr = (unsigned long)of_claim(claim_base, size, 0);
- if ((void *)addr != (void *)-1)
+ addr = (unsigned long) of_claim(claim_base, size, 0);
+ if (addr != PROM_ERROR)
break;
}
if (addr == 0)
diff --git a/arch/powerpc/boot/of.h b/arch/powerpc/boot/of.h
index e4c68f7391c5c430613087054c45de516fe1cc6a..c8c1750aba0cc23aed26298785f53d4fd3676fee 100644
--- a/arch/powerpc/boot/of.h
+++ b/arch/powerpc/boot/of.h
@@ -1,12 +1,15 @@
#ifndef _PPC_BOOT_OF_H_
#define _PPC_BOOT_OF_H_
+#include "swab.h"
+
typedef void *phandle;
-typedef void *ihandle;
+typedef u32 ihandle;
void of_init(void *promptr);
int of_call_prom(const char *service, int nargs, int nret, ...);
-void *of_claim(unsigned long virt, unsigned long size, unsigned long align);
+unsigned int of_claim(unsigned long virt, unsigned long size,
+ unsigned long align);
void *of_vmlinux_alloc(unsigned long size);
void of_exit(void);
void *of_finddevice(const char *name);
@@ -18,4 +21,16 @@ int of_setprop(const void *phandle, const char *name, const void *buf,
/* Console functions */
void of_console_init(void);
+typedef u32 __be32;
+
+#ifdef __LITTLE_ENDIAN__
+#define cpu_to_be32(x) swab32(x)
+#define be32_to_cpu(x) swab32(x)
+#else
+#define cpu_to_be32(x) (x)
+#define be32_to_cpu(x) (x)
+#endif
+
+#define PROM_ERROR (-1u)
+
#endif /* _PPC_BOOT_OF_H_ */
diff --git a/arch/powerpc/boot/ofconsole.c b/arch/powerpc/boot/ofconsole.c
index ce0e0242445325feb7251ae9214705e90c42864a..8b754702460aee3e51eabd016d71c888abd4a719 100644
--- a/arch/powerpc/boot/ofconsole.c
+++ b/arch/powerpc/boot/ofconsole.c
@@ -18,7 +18,7 @@
#include "of.h"
-static void *of_stdout_handle;
+static unsigned int of_stdout_handle;
static int of_console_open(void)
{
@@ -27,8 +27,10 @@ static int of_console_open(void)
if (((devp = of_finddevice("/chosen")) != NULL)
&& (of_getprop(devp, "stdout", &of_stdout_handle,
sizeof(of_stdout_handle))
- == sizeof(of_stdout_handle)))
+ == sizeof(of_stdout_handle))) {
+ of_stdout_handle = be32_to_cpu(of_stdout_handle);
return 0;
+ }
return -1;
}
diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c
index b0ec9cf3eaaf6e6bf44f9a77aeb079761a2d628c..46c98a47d9493a7ae54940070cb7ceb0cc716a59 100644
--- a/arch/powerpc/boot/oflib.c
+++ b/arch/powerpc/boot/oflib.c
@@ -16,74 +16,83 @@
#include "of.h"
+typedef u32 prom_arg_t;
+
+/* The following structure is used to communicate with open firmware.
+ * All arguments in and out are in big endian format. */
+struct prom_args {
+ __be32 service; /* Address of service name string. */
+ __be32 nargs; /* Number of input arguments. */
+ __be32 nret; /* Number of output arguments. */
+ __be32 args[10]; /* Input/output arguments. */
+};
+
+#ifdef __powerpc64__
+extern int prom(void *);
+#else
static int (*prom) (void *);
+#endif
void of_init(void *promptr)
{
+#ifndef __powerpc64__
prom = (int (*)(void *))promptr;
+#endif
}
+#define ADDR(x) (u32)(unsigned long)(x)
+
int of_call_prom(const char *service, int nargs, int nret, ...)
{
int i;
- struct prom_args {
- const char *service;
- int nargs;
- int nret;
- unsigned int args[12];
- } args;
+ struct prom_args args;
va_list list;
- args.service = service;
- args.nargs = nargs;
- args.nret = nret;
+ args.service = cpu_to_be32(ADDR(service));
+ args.nargs = cpu_to_be32(nargs);
+ args.nret = cpu_to_be32(nret);
va_start(list, nret);
for (i = 0; i < nargs; i++)
- args.args[i] = va_arg(list, unsigned int);
+ args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
va_end(list);
for (i = 0; i < nret; i++)
args.args[nargs+i] = 0;
if (prom(&args) < 0)
- return -1;
+ return PROM_ERROR;
- return (nret > 0)? args.args[nargs]: 0;
+ return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
}
static int of_call_prom_ret(const char *service, int nargs, int nret,
- unsigned int *rets, ...)
+ prom_arg_t *rets, ...)
{
int i;
- struct prom_args {
- const char *service;
- int nargs;
- int nret;
- unsigned int args[12];
- } args;
+ struct prom_args args;
va_list list;
- args.service = service;
- args.nargs = nargs;
- args.nret = nret;
+ args.service = cpu_to_be32(ADDR(service));
+ args.nargs = cpu_to_be32(nargs);
+ args.nret = cpu_to_be32(nret);
va_start(list, rets);
for (i = 0; i < nargs; i++)
- args.args[i] = va_arg(list, unsigned int);
+ args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
va_end(list);
for (i = 0; i < nret; i++)
args.args[nargs+i] = 0;
if (prom(&args) < 0)
- return -1;
+ return PROM_ERROR;
- if (rets != (void *) 0)
+ if (rets != NULL)
for (i = 1; i < nret; ++i)
- rets[i-1] = args.args[nargs+i];
+ rets[i-1] = be32_to_cpu(args.args[nargs+i]);
- return (nret > 0)? args.args[nargs]: 0;
+ return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
}
/* returns true if s2 is a prefix of s1 */
@@ -103,7 +112,7 @@ static int string_match(const char *s1, const char *s2)
*/
static int need_map = -1;
static ihandle chosen_mmu;
-static phandle memory;
+static ihandle memory;
static int check_of_version(void)
{
@@ -132,10 +141,10 @@ static int check_of_version(void)
printf("no mmu\n");
return 0;
}
- memory = (ihandle) of_call_prom("open", 1, 1, "/memory");
- if (memory == (ihandle) -1) {
- memory = (ihandle) of_call_prom("open", 1, 1, "/memory@0");
- if (memory == (ihandle) -1) {
+ memory = of_call_prom("open", 1, 1, "/memory");
+ if (memory == PROM_ERROR) {
+ memory = of_call_prom("open", 1, 1, "/memory@0");
+ if (memory == PROM_ERROR) {
printf("no memory node\n");
return 0;
}
@@ -144,40 +153,41 @@ static int check_of_version(void)
return 1;
}
-void *of_claim(unsigned long virt, unsigned long size, unsigned long align)
+unsigned int of_claim(unsigned long virt, unsigned long size,
+ unsigned long align)
{
int ret;
- unsigned int result;
+ prom_arg_t result;
if (need_map < 0)
need_map = check_of_version();
if (align || !need_map)
- return (void *) of_call_prom("claim", 3, 1, virt, size, align);
+ return of_call_prom("claim", 3, 1, virt, size, align);
ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", memory,
align, size, virt);
if (ret != 0 || result == -1)
- return (void *) -1;
+ return -1;
ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu,
align, size, virt);
/* 0x12 == coherent + read/write */
ret = of_call_prom("call-method", 6, 1, "map", chosen_mmu,
0x12, size, virt, virt);
- return (void *) virt;
+ return virt;
}
void *of_vmlinux_alloc(unsigned long size)
{
unsigned long start = (unsigned long)_start, end = (unsigned long)_end;
- void *addr;
+ unsigned long addr;
void *p;
/* With some older POWER4 firmware we need to claim the area the kernel
* will reside in. Newer firmwares don't need this so we just ignore
* the return value.
*/
- addr = of_claim(start, end - start, 0);
- printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n",
+ addr = (unsigned long) of_claim(start, end - start, 0);
+ printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %lx\r\n",
start, end, end - start, addr);
p = malloc(size);
@@ -197,7 +207,7 @@ void of_exit(void)
*/
void *of_finddevice(const char *name)
{
- return (phandle) of_call_prom("finddevice", 1, 1, name);
+ return (void *) (unsigned long) of_call_prom("finddevice", 1, 1, name);
}
int of_getprop(const void *phandle, const char *name, void *buf,
diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h
index eb0e98be69e0bc8c7aece45746f20c6fcd03ff23..35ea60c1f07020e1ce4c68e587ca8cafbc723d89 100644
--- a/arch/powerpc/boot/ppc_asm.h
+++ b/arch/powerpc/boot/ppc_asm.h
@@ -62,4 +62,16 @@
#define SPRN_TBRL 268
#define SPRN_TBRU 269
+#define FIXUP_ENDIAN \
+ tdi 0, 0, 0x48; /* Reverse endian of b . + 8 */ \
+ b $+36; /* Skip trampoline if endian is good */ \
+ .long 0x05009f42; /* bcl 20,31,$+4 */ \
+ .long 0xa602487d; /* mflr r10 */ \
+ .long 0x1c004a39; /* addi r10,r10,28 */ \
+ .long 0xa600607d; /* mfmsr r11 */ \
+ .long 0x01006b69; /* xori r11,r11,1 */ \
+ .long 0xa6035a7d; /* mtsrr0 r10 */ \
+ .long 0xa6037b7d; /* mtsrr1 r11 */ \
+ .long 0x2400004c /* rfid */
+
#endif /* _PPC64_PPC_ASM_H */
diff --git a/arch/powerpc/boot/pseries-head.S b/arch/powerpc/boot/pseries-head.S
new file mode 100644
index 0000000000000000000000000000000000000000..6ef6e02e80f92c6702c7ec41c44df9798fb4a778
--- /dev/null
+++ b/arch/powerpc/boot/pseries-head.S
@@ -0,0 +1,8 @@
+#include "ppc_asm.h"
+
+ .text
+
+ .globl _zimage_start
+_zimage_start:
+ FIXUP_ENDIAN
+ b _zimage_start_lib
diff --git a/arch/powerpc/boot/stdio.c b/arch/powerpc/boot/stdio.c
index 5b57800bbc675e11efabec8601a8b9000ce4c196..a701261b17818118f824221e81a7177d09f004b4 100644
--- a/arch/powerpc/boot/stdio.c
+++ b/arch/powerpc/boot/stdio.c
@@ -21,6 +21,18 @@ size_t strnlen(const char * s, size_t count)
return sc - s;
}
+#ifdef __powerpc64__
+
+# define do_div(n, base) ({ \
+ unsigned int __base = (base); \
+ unsigned int __rem; \
+ __rem = ((unsigned long long)(n)) % __base; \
+ (n) = ((unsigned long long)(n)) / __base; \
+ __rem; \
+})
+
+#else
+
extern unsigned int __div64_32(unsigned long long *dividend,
unsigned int divisor);
@@ -39,6 +51,8 @@ extern unsigned int __div64_32(unsigned long long *dividend,
__rem; \
})
+#endif /* __powerpc64__ */
+
static int skip_atoi(const char **s)
{
int i, c;
diff --git a/arch/powerpc/boot/swab.h b/arch/powerpc/boot/swab.h
new file mode 100644
index 0000000000000000000000000000000000000000..d0e1431084cae0b4df4f05211687552019a873c3
--- /dev/null
+++ b/arch/powerpc/boot/swab.h
@@ -0,0 +1,29 @@
+#ifndef _PPC_BOOT_SWAB_H_
+#define _PPC_BOOT_SWAB_H_
+
+static inline u16 swab16(u16 x)
+{
+ return ((x & (u16)0x00ffU) << 8) |
+ ((x & (u16)0xff00U) >> 8);
+}
+
+static inline u32 swab32(u32 x)
+{
+ return ((x & (u32)0x000000ffUL) << 24) |
+ ((x & (u32)0x0000ff00UL) << 8) |
+ ((x & (u32)0x00ff0000UL) >> 8) |
+ ((x & (u32)0xff000000UL) >> 24);
+}
+
+static inline u64 swab64(u64 x)
+{
+ return (u64)((x & (u64)0x00000000000000ffULL) << 56) |
+ (u64)((x & (u64)0x000000000000ff00ULL) << 40) |
+ (u64)((x & (u64)0x0000000000ff0000ULL) << 24) |
+ (u64)((x & (u64)0x00000000ff000000ULL) << 8) |
+ (u64)((x & (u64)0x000000ff00000000ULL) >> 8) |
+ (u64)((x & (u64)0x0000ff0000000000ULL) >> 24) |
+ (u64)((x & (u64)0x00ff000000000000ULL) >> 40) |
+ (u64)((x & (u64)0xff00000000000000ULL) >> 56);
+}
+#endif /* _PPC_BOOT_SWAB_H_ */
diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c
new file mode 100644
index 0000000000000000000000000000000000000000..b73174c34fe45f236ae2c6604c9f82f49ba697e2
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-akebono.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * Based on earlier code:
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ * Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdlib.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define SPRN_PIR 0x11E /* Processor Indentification Register */
+#define USERDATA_LEN 256 /* Length of userdata passed in by PIBS */
+#define MAX_RANKS 0x4
+#define DDR3_MR0CF 0x80010011U
+#define CCTL0_MCO2 0x8000080FU
+#define CCTL0_MCO3 0x80000810U
+#define CCTL0_MCO4 0x80000811U
+#define CCTL0_MCO5 0x80000812U
+#define CCTL0_MCO6 0x80000813U
+
+static unsigned long long ibm_akebono_memsize;
+static long long unsigned mac_addr;
+
+static unsigned long long ibm_akebono_detect_memsize(void)
+{
+ u32 reg;
+ unsigned i;
+ unsigned long long memsize = 0;
+
+ for (i = 0; i < MAX_RANKS; i++) {
+ reg = mfdcrx(DDR3_MR0CF + i);
+
+ if (!(reg & 1))
+ continue;
+
+ reg &= 0x0000f000;
+ reg >>= 12;
+ memsize += (0x800000ULL << reg);
+ }
+
+ return memsize;
+}
+
+static void ibm_akebono_fixups(void)
+{
+ void *emac;
+ u32 reg;
+
+ dt_fixup_memory(0x0ULL, ibm_akebono_memsize);
+
+ /* Fixup the SD timeout frequency */
+ mtdcrx(CCTL0_MCO4, 0x1);
+
+ /* Disable SD high-speed mode (which seems to be broken) */
+ reg = mfdcrx(CCTL0_MCO2) & ~0x2;
+ mtdcrx(CCTL0_MCO2, reg);
+
+ /* Set the MAC address */
+ emac = finddevice("/plb/opb/ethernet");
+ if (emac > 0) {
+ if (mac_addr)
+ setprop(emac, "local-mac-address",
+ ((u8 *) &mac_addr) + 2 , 6);
+ }
+}
+
+void platform_init(char *userdata)
+{
+ unsigned long end_of_ram, avail_ram;
+ u32 pir_reg;
+ int node, size;
+ const u32 *timebase;
+ int len, i, userdata_len;
+ char *end;
+
+ userdata[USERDATA_LEN - 1] = '\0';
+ userdata_len = strlen(userdata);
+ for (i = 0; i < userdata_len - 15; i++) {
+ if (strncmp(&userdata[i], "local-mac-addr=", 15) == 0) {
+ if (i > 0 && userdata[i - 1] != ' ') {
+ /* We've only found a substring ending
+ * with local-mac-addr so this isn't
+ * our mac address. */
+ continue;
+ }
+
+ mac_addr = strtoull(&userdata[i + 15], &end, 16);
+
+ /* Remove the "local-mac-addr=<...>" from the kernel
+ * command line, including the tailing space if
+ * present. */
+ if (*end == ' ')
+ end++;
+
+ len = ((int) end) - ((int) &userdata[i]);
+ memmove(&userdata[i], end,
+ userdata_len - (len + i) + 1);
+ break;
+ }
+ }
+
+ loader_info.cmdline = userdata;
+ loader_info.cmdline_len = 256;
+
+ ibm_akebono_memsize = ibm_akebono_detect_memsize();
+ if (ibm_akebono_memsize >> 32)
+ end_of_ram = ~0UL;
+ else
+ end_of_ram = ibm_akebono_memsize;
+ avail_ram = end_of_ram - (unsigned long)_end;
+
+ simple_alloc_init(_end, avail_ram, 128, 64);
+ platform_ops.fixups = ibm_akebono_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ pir_reg = mfspr(SPRN_PIR);
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+ fdt_init(_dtb_start);
+
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
index 6636b1d7821b6e5d5bcd8126674a8f3d8499601f..243b8497d58b847a2877523c45df04f2f1326b32 100644
--- a/arch/powerpc/boot/util.S
+++ b/arch/powerpc/boot/util.S
@@ -45,7 +45,7 @@ udelay:
mfspr r4,SPRN_PVR
srwi r4,r4,16
cmpwi 0,r4,1 /* 601 ? */
- bne .udelay_not_601
+ bne .Ludelay_not_601
00: li r0,86 /* Instructions / microsecond? */
mtctr r0
10: addi r0,r0,0 /* NOP */
@@ -54,7 +54,7 @@ udelay:
bne 00b
blr
-.udelay_not_601:
+.Ludelay_not_601:
mulli r4,r3,1000 /* nanoseconds */
/* Change r4 to be the number of ticks using:
* (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d27a25518b018b03df07110919104ff6811e1b00..ae0f88ec4a3295e570c1032f6feb323aa5038473 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -40,6 +40,7 @@ cacheit=
binary=
gzip=.gz
pie=
+format=
# cross-compilation prefix
CROSS=
@@ -136,6 +137,14 @@ if [ -z "$kernel" ]; then
kernel=vmlinux
fi
+elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
+case "$elfformat" in
+ elf64-powerpcle) format=elf64lppc ;;
+ elf64-powerpc) format=elf32ppc ;;
+ elf32-powerpc) format=elf32ppc ;;
+esac
+
+
platformo=$object/"$platform".o
lds=$object/zImage.lds
ext=strip
@@ -152,8 +161,12 @@ of)
make_space=n
;;
pseries)
- platformo="$object/of.o $object/epapr.o"
+ platformo="$object/pseries-head.o $object/of.o $object/epapr.o"
link_address='0x4000000'
+ if [ "$format" != "elf32ppc" ]; then
+ link_address=
+ pie=-pie
+ fi
make_space=n
;;
maple)
@@ -257,6 +270,9 @@ gamecube|wii)
treeboot-currituck)
link_address='0x1000000'
;;
+treeboot-akebono)
+ link_address='0x1000000'
+ ;;
treeboot-iss4xx-mpic)
platformo="$object/treeboot-iss4xx.o"
;;
@@ -379,7 +395,7 @@ if [ "$platform" != "miboot" ]; then
if [ -n "$link_address" ] ; then
text_start="-Ttext $link_address"
fi
- ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
+ ${CROSS}ld -m $format -T $lds $text_start $pie -o "$ofile" \
$platformo $tmp $object/wrapper.a
rm $tmp
fi
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 2bd8731f13655a97550064a46f7f890c16b6c05f..861e72109df2da0b54c98a94584b8b4ff853026b 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -1,4 +1,10 @@
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+OUTPUT_ARCH(powerpc:common64)
+#else
OUTPUT_ARCH(powerpc:common)
+#endif
ENTRY(_zimage_start)
EXTERN(_zimage_start)
SECTIONS
@@ -16,7 +22,9 @@ SECTIONS
*(.rodata*)
*(.data*)
*(.sdata*)
+#ifndef CONFIG_PPC64_BOOT_WRAPPER
*(.got2)
+#endif
}
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
@@ -27,7 +35,13 @@ SECTIONS
}
.hash : { *(.hash) }
.interp : { *(.interp) }
- .rela.dyn : { *(.rela*) }
+ .rela.dyn :
+ {
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+ __rela_dyn_start = .;
+#endif
+ *(.rela*)
+ }
. = ALIGN(8);
.kernel:dtb :
@@ -53,6 +67,15 @@ SECTIONS
_initrd_end = .;
}
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+ .got :
+ {
+ __toc_start = .;
+ *(.got)
+ *(.toc)
+ }
+#endif
+
. = ALIGN(4096);
.bss :
{
diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig
new file mode 100644
index 0000000000000000000000000000000000000000..7e2530cd9d30700eb61ab2d137639db99572214d
--- /dev/null
+++ b/arch/powerpc/configs/44x/akebono_defconfig
@@ -0,0 +1,148 @@
+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_SLUB_CPU_PARTIAL is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_POWERNV_MSI is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_AKEBONO=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_COMPACTION is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_USB_DEFAULT_PERSIST is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PCI is not set
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_DEFAULT="n"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00010000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x33f
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1_PPC=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/85xx/kmp204x_defconfig b/arch/powerpc/configs/85xx/kmp204x_defconfig
new file mode 100644
index 0000000000000000000000000000000000000000..e9a81e5ba2737c8a3a782927be89a7272892d826
--- /dev/null
+++ b/arch/powerpc/configs/85xx/kmp204x_defconfig
@@ -0,0 +1,225 @@
+CONFIG_PPC_85xx=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_CORENET_GENERIC=y
+CONFIG_MPIC_MSGR=y
+CONFIG_HIGHMEM=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_KEXEC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_LOWMEM_SIZE_BOOL=y
+CONFIG_LOWMEM_SIZE=0x20000000
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IP_SCTP=m
+CONFIG_TIPC=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_NET_SCH_MULTIQ=y
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_CLS_BASIC=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_U32=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_FLOW=y
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=2048
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_XGMAC_MDIO=y
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_NVRAM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_PTP_1588_CLOCK=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_UIO=y
+CONFIG_STAGING=y
+# CONFIG_NET_VENDOR_SILICOM is not set
+CONFIG_CLK_PPC_CORENET=y
+CONFIG_EXT2_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_ITU_T=m
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_RCU_TRACE=y
+CONFIG_UPROBE_EVENT=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index bbd794deb6eb13a471d4097996ec57f9f9c7a092..c19ff057d0f94a822c3aee618aa58599ef3f9cd9 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -72,6 +72,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_M25P80=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 19f0fbe5ba4b43e35f9e00bca14acacf2b79f343..55765c8cb08f9067e45ec2df588bbee37af61918 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -32,7 +32,6 @@ CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 062312e1fe1abd7b2912678f9e318f249811a8ed..5c6ecdc0f70e717b123e10abfe8d815f5e63b960 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -35,7 +35,6 @@ CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 97e02f985df8e47946438ecc1b0ba2f040ee7bf5..37991e154ef88faf50b7b8b447c1772877a253bf 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -42,15 +42,47 @@ void __patch_exception(int exc, unsigned long addr);
} while (0)
#endif
+#define OP_RT_RA_MASK 0xffff0000UL
+#define LIS_R2 0x3c020000UL
+#define ADDIS_R2_R12 0x3c4c0000UL
+#define ADDI_R2_R2 0x38420000UL
+
static inline unsigned long ppc_function_entry(void *func)
{
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+ u32 *insn = func;
+
+ /*
+ * A PPC64 ABIv2 function may have a local and a global entry
+ * point. We need to use the local entry point when patching
+ * functions, so identify and step over the global entry point
+ * sequence.
+ *
+ * The global entry point sequence is always of the form:
+ *
+ * addis r2,r12,XXXX
+ * addi r2,r2,XXXX
+ *
+ * A linker optimisation may convert the addis to lis:
+ *
+ * lis r2,XXXX
+ * addi r2,r2,XXXX
+ */
+ if ((((*insn & OP_RT_RA_MASK) == ADDIS_R2_R12) ||
+ ((*insn & OP_RT_RA_MASK) == LIS_R2)) &&
+ ((*(insn+1) & OP_RT_RA_MASK) == ADDI_R2_R2))
+ return (unsigned long)(insn + 2);
+ else
+ return (unsigned long)func;
+#else
/*
- * On PPC64 the function pointer actually points to the function's
- * descriptor. The first entry in the descriptor is the address
- * of the function text.
+ * On PPC64 ABIv1 the function pointer actually points to the
+ * function's descriptor. The first entry in the descriptor is the
+ * address of the function text.
*/
return ((func_descr_t *)func)->entry;
+#endif
#else
return (unsigned long)func;
#endif
diff --git a/arch/powerpc/include/asm/context_tracking.h b/arch/powerpc/include/asm/context_tracking.h
index b6f5a33b8ee2d839dd5911935adab4738fa48ef8..40014921ffff238fc84c4dbd25b2b02661b8b3d6 100644
--- a/arch/powerpc/include/asm/context_tracking.h
+++ b/arch/powerpc/include/asm/context_tracking.h
@@ -2,9 +2,9 @@
#define _ASM_POWERPC_CONTEXT_TRACKING_H
#ifdef CONFIG_CONTEXT_TRACKING
-#define SCHEDULE_USER bl .schedule_user
+#define SCHEDULE_USER bl schedule_user
#else
-#define SCHEDULE_USER bl .schedule
+#define SCHEDULE_USER bl schedule
#endif
#endif
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index ac3eedb9b74ae073f5019dc960862d82e3605455..2bf8e9307be9833b5bf9af51defdfada8feae68d 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -18,10 +18,12 @@
#ifdef CONFIG_SMP
extern int threads_per_core;
+extern int threads_per_subcore;
extern int threads_shift;
extern cpumask_t threads_core_mask;
#else
#define threads_per_core 1
+#define threads_per_subcore 1
#define threads_shift 0
#define threads_core_mask (CPU_MASK_CPU0)
#endif
@@ -74,6 +76,11 @@ static inline int cpu_thread_in_core(int cpu)
return cpu & (threads_per_core - 1);
}
+static inline int cpu_thread_in_subcore(int cpu)
+{
+ return cpu & (threads_per_subcore - 1);
+}
+
static inline int cpu_first_thread_sibling(int cpu)
{
return cpu & ~(threads_per_core - 1);
diff --git a/arch/powerpc/include/asm/debug.h b/arch/powerpc/include/asm/debug.h
index d2516308ed1eabe30927bf631bbc62f6b9c9d843..a954e4975049c5632059e13535932ae0c8e7587c 100644
--- a/arch/powerpc/include/asm/debug.h
+++ b/arch/powerpc/include/asm/debug.h
@@ -46,7 +46,8 @@ static inline int debugger_break_match(struct pt_regs *regs) { return 0; }
static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
#endif
-int set_breakpoint(struct arch_hw_breakpoint *brk);
+void set_breakpoint(struct arch_hw_breakpoint *brk);
+void __set_breakpoint(struct arch_hw_breakpoint *brk);
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
extern void do_send_trap(struct pt_regs *regs, unsigned long address,
unsigned long error_code, int signal_code, int brkpt);
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index d4dd41fb951b343918dda3db91399702d0e86423..b76f58c124ca04c4673f1392c2f7a06960854142 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -32,6 +32,22 @@ struct device_node;
#ifdef CONFIG_EEH
+/* EEH subsystem flags */
+#define EEH_ENABLED 0x1 /* EEH enabled */
+#define EEH_FORCE_DISABLED 0x2 /* EEH disabled */
+#define EEH_PROBE_MODE_DEV 0x4 /* From PCI device */
+#define EEH_PROBE_MODE_DEVTREE 0x8 /* From device tree */
+
+/*
+ * Delay for PE reset, all in ms
+ *
+ * PCI specification has reset hold time of 100 milliseconds.
+ * We have 250 milliseconds here. The PCI bus settlement time
+ * is specified as 1.5 seconds and we have 1.8 seconds.
+ */
+#define EEH_PE_RST_HOLD_TIME 250
+#define EEH_PE_RST_SETTLE_TIME 1800
+
/*
* The struct is used to trace PE related EEH functionality.
* In theory, there will have one instance of the struct to
@@ -53,7 +69,7 @@ struct device_node;
#define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */
#define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */
-#define EEH_PE_PHB_DEAD (1 << 2) /* Dead PHB */
+#define EEH_PE_RESET (1 << 2) /* PE reset in progress */
#define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */
@@ -92,6 +108,7 @@ struct eeh_pe {
#define EEH_DEV_NO_HANDLER (1 << 8) /* No error handler */
#define EEH_DEV_SYSFS (1 << 9) /* Sysfs created */
+#define EEH_DEV_REMOVED (1 << 10) /* Removed permanently */
struct eeh_dev {
int mode; /* EEH mode */
@@ -99,7 +116,9 @@ struct eeh_dev {
int config_addr; /* Config address */
int pe_config_addr; /* PE config address */
u32 config_space[16]; /* Saved PCI config space */
- u8 pcie_cap; /* Saved PCIe capability */
+ int pcix_cap; /* Saved PCIx capability */
+ int pcie_cap; /* Saved PCIe capability */
+ int aer_cap; /* Saved AER capability */
struct eeh_pe *pe; /* Associated PE */
struct list_head list; /* Form link list in the PE */
struct pci_controller *phb; /* Associated PHB */
@@ -171,37 +190,40 @@ struct eeh_ops {
int (*restore_config)(struct device_node *dn);
};
+extern int eeh_subsystem_flags;
extern struct eeh_ops *eeh_ops;
-extern bool eeh_subsystem_enabled;
extern raw_spinlock_t confirm_error_lock;
-extern int eeh_probe_mode;
static inline bool eeh_enabled(void)
{
- return eeh_subsystem_enabled;
+ if ((eeh_subsystem_flags & EEH_FORCE_DISABLED) ||
+ !(eeh_subsystem_flags & EEH_ENABLED))
+ return false;
+
+ return true;
}
static inline void eeh_set_enable(bool mode)
{
- eeh_subsystem_enabled = mode;
+ if (mode)
+ eeh_subsystem_flags |= EEH_ENABLED;
+ else
+ eeh_subsystem_flags &= ~EEH_ENABLED;
}
-#define EEH_PROBE_MODE_DEV (1<<0) /* From PCI device */
-#define EEH_PROBE_MODE_DEVTREE (1<<1) /* From device tree */
-
static inline void eeh_probe_mode_set(int flag)
{
- eeh_probe_mode = flag;
+ eeh_subsystem_flags |= flag;
}
static inline int eeh_probe_mode_devtree(void)
{
- return (eeh_probe_mode == EEH_PROBE_MODE_DEVTREE);
+ return (eeh_subsystem_flags & EEH_PROBE_MODE_DEVTREE);
}
static inline int eeh_probe_mode_dev(void)
{
- return (eeh_probe_mode == EEH_PROBE_MODE_DEV);
+ return (eeh_subsystem_flags & EEH_PROBE_MODE_DEV);
}
static inline void eeh_serialize_lock(unsigned long *flags)
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 935b5e7a1436dbbead45f9e578f75a024de0366f..888d8f3f2524823ba0cfa04cc24570ee78ffbbfc 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -90,6 +90,8 @@ typedef elf_vrregset_t elf_fpxregset_t;
do { \
if (((ex).e_flags & 0x3) == 2) \
set_thread_flag(TIF_ELF2ABI); \
+ else \
+ clear_thread_flag(TIF_ELF2ABI); \
if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
set_thread_flag(TIF_32BIT); \
else \
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index a563d9afd179f3790332c453ebae0ee760df6196..a8b52b61043f57112c59822469e9ae648ecd1b1a 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -174,10 +174,10 @@ exc_##label##_book3e:
mtlr r16;
#define TLB_MISS_STATS_D(name) \
addi r9,r13,MMSTAT_DSTATS+name; \
- bl .tlb_stat_inc;
+ bl tlb_stat_inc;
#define TLB_MISS_STATS_I(name) \
addi r9,r13,MMSTAT_ISTATS+name; \
- bl .tlb_stat_inc;
+ bl tlb_stat_inc;
#define TLB_MISS_STATS_X(name) \
ld r8,PACA_EXTLB+EX_TLB_ESR(r13); \
cmpdi cr2,r8,-1; \
@@ -185,7 +185,7 @@ exc_##label##_book3e:
addi r9,r13,MMSTAT_DSTATS+name; \
b 62f; \
61: addi r9,r13,MMSTAT_ISTATS+name; \
-62: bl .tlb_stat_inc;
+62: bl tlb_stat_inc;
#define TLB_MISS_STATS_SAVE_INFO \
std r14,EX_TLB_ESR(r12); /* save ESR */
#define TLB_MISS_STATS_SAVE_INFO_BOLTED \
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index aeaa56cd9b5465100b00025c7a1da36b3d58e1c5..8f35cd7d59cc6565f07bb46fd1cb392a8794c47e 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -517,7 +517,7 @@ label##_relon_hv: \
#define DISABLE_INTS RECONCILE_IRQ_STATE(r10,r11)
#define ADD_NVGPRS \
- bl .save_nvgprs
+ bl save_nvgprs
#define RUNLATCH_ON \
BEGIN_FTR_SECTION \
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index 169d039ed402080720aef97c33e20952d28dad12..e3661872fbea5b03888aa88c35753bcfc9983403 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -61,6 +61,7 @@ struct dyn_arch_ftrace {
#endif
#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__)
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
{
@@ -72,6 +73,7 @@ static inline bool arch_syscall_match_sym_name(const char *sym, const char *name
*/
return !strcmp(sym + 4, name + 3);
}
+#endif
#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 && !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_FTRACE */
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index eb0f4ac75c4cea9a39b2ba4391afbfd5ca980caa..ac6432d9be4694010a9414c1ddf7e836cec9cfd6 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -79,7 +79,7 @@ static inline void hw_breakpoint_disable(void)
brk.address = 0;
brk.type = 0;
brk.len = 0;
- set_breakpoint(&brk);
+ __set_breakpoint(&brk);
}
extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs);
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index f51a5580bfd0b2dfbe1abb5edd68e5ab2d3541b7..e20eb95429a8233528fc93508b6bdd0b8ce3bc24 100644
--- a/arch/powerpc/include/asm/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -20,9 +20,9 @@
*/
#define TRACE_WITH_FRAME_BUFFER(func) \
mflr r0; \
- stdu r1, -32(r1); \
+ stdu r1, -STACK_FRAME_OVERHEAD(r1); \
std r0, 16(r1); \
- stdu r1, -32(r1); \
+ stdu r1, -STACK_FRAME_OVERHEAD(r1); \
bl func; \
ld r1, 0(r1); \
ld r1, 0(r1);
@@ -36,8 +36,8 @@
* have to call a C function so call a wrapper that saves all the
* C-clobbered registers.
*/
-#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)
-#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
+#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on)
+#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off)
/*
* This is used by assembly code to soft-disable interrupts first and
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index 7b6feab6fd26f26cfc3c19456f163845d72db86e..af15d4d8d604c79ab7f09066c1cacfe37d30c7f7 100644
--- a/arch/powerpc/include/asm/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -30,6 +30,7 @@
#include <linux/ptrace.h>
#include <linux/percpu.h>
#include <asm/probes.h>
+#include <asm/code-patching.h>
#define __ARCH_WANT_KPROBES_INSN_SLOT
@@ -56,9 +57,9 @@ typedef ppc_opcode_t kprobe_opcode_t;
if ((colon = strchr(name, ':')) != NULL) { \
colon++; \
if (*colon != '\0' && *colon != '.') \
- addr = *(kprobe_opcode_t **)addr; \
+ addr = (kprobe_opcode_t *)ppc_function_entry(addr); \
} else if (name[0] != '.') \
- addr = *(kprobe_opcode_t **)addr; \
+ addr = (kprobe_opcode_t *)ppc_function_entry(addr); \
} else { \
char dot_name[KSYM_NAME_LEN]; \
dot_name[0] = '.'; \
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 4a7cc453be0b0b8193a52a9900d71eea3d2d27fc..9c89cdd067a643a6a0572042e90f0d77066dc1d4 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -337,6 +337,10 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
vcpu->kvm->arch.kvm_ops->fast_vcpu_kick(vcpu);
}
+extern void kvm_hv_vm_activated(void);
+extern void kvm_hv_vm_deactivated(void);
+extern bool kvm_hv_mode_active(void);
+
#else
static inline void __init kvm_cma_reserve(void)
{}
@@ -356,6 +360,9 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
{
kvm_vcpu_kick(vcpu);
}
+
+static inline bool kvm_hv_mode_active(void) { return false; }
+
#endif
#ifdef CONFIG_KVM_XICS
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
index b36f650a13fff8d0cd5dacbdee907997d22a6790..e3ad5c72724afd627fb906ba37239a0f8fdf024b 100644
--- a/arch/powerpc/include/asm/linkage.h
+++ b/arch/powerpc/include/asm/linkage.h
@@ -2,6 +2,7 @@
#define _ASM_POWERPC_LINKAGE_H
#ifdef CONFIG_PPC64
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
#define cond_syscall(x) \
asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n" \
"\t.weak ." #x "\n\t.set ." #x ", .sys_ni_syscall\n")
@@ -9,5 +10,6 @@
asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \
"\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
#endif
+#endif
#endif /* _ASM_POWERPC_LINKAGE_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 5b6c03f1058f21c24a6402d05b8c19d6cd884983..f92b0b54e921a5e71684a96b2d92f88b290e2222 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -98,6 +98,9 @@ struct machdep_calls {
void (*iommu_save)(void);
void (*iommu_restore)(void);
#endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+ unsigned long (*memory_block_size)(void);
+#endif
#endif /* CONFIG_PPC64 */
void (*pci_dma_dev_setup)(struct pci_dev *dev);
@@ -113,6 +116,8 @@ struct machdep_calls {
/* Optional, may be NULL. */
void (*show_cpuinfo)(struct seq_file *m);
void (*show_percpuinfo)(struct seq_file *m, int i);
+ /* Returns the current operating frequency of "cpu" in Hz */
+ unsigned long (*get_proc_freq)(unsigned int cpu);
void (*init_IRQ)(void);
@@ -241,6 +246,9 @@ struct machdep_calls {
/* Called during PCI resource reassignment */
resource_size_t (*pcibios_window_alignment)(struct pci_bus *, unsigned long type);
+ /* Reset the secondary bus of bridge */
+ void (*pcibios_reset_secondary_bus)(struct pci_dev *dev);
+
/* Called to shutdown machine specific hardware not already controlled
* by other drivers.
*/
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index 49fa55bfbac4fba38f26368cbbdcdf1513aa590c..dcfcad139bccc0765e3dc6a5f17cd5566258910b 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -35,6 +35,7 @@ struct mod_arch_specific {
#ifdef __powerpc64__
unsigned int stubs_section; /* Index of stubs section in module */
unsigned int toc_section; /* What section is the TOC? */
+ bool toc_fixed; /* Have we fixed up .TOC.? */
#ifdef CONFIG_DYNAMIC_FTRACE
unsigned long toc;
unsigned long tramp;
@@ -77,6 +78,9 @@ struct mod_arch_specific {
# endif /* MODULE */
#endif
+bool is_module_trampoline(u32 *insns);
+int module_trampoline_target(struct module *mod, u32 *trampoline,
+ unsigned long *target);
struct exception_table_entry;
void sort_ex_table(struct exception_table_entry *start,
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 66ad7a74116f15dd803ef7e887b7988ac5efa61a..cb15cbb5160044233ac697d4ab0cce79fe4c06e4 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -154,6 +154,7 @@ extern int opal_enter_rtas(struct rtas_args *args,
#define OPAL_LPC_READ 67
#define OPAL_LPC_WRITE 68
#define OPAL_RETURN_CPU 69
+#define OPAL_REINIT_CPUS 70
#define OPAL_ELOG_READ 71
#define OPAL_ELOG_WRITE 72
#define OPAL_ELOG_ACK 73
@@ -509,7 +510,7 @@ enum OpalMemErr_DynErrType {
struct OpalMemoryErrorData {
enum OpalMemErr_Version version:8; /* 0x00 */
enum OpalMemErrType type:8; /* 0x01 */
- uint16_t flags; /* 0x02 */
+ __be16 flags; /* 0x02 */
uint8_t reserved_1[4]; /* 0x04 */
union {
@@ -517,15 +518,15 @@ struct OpalMemoryErrorData {
struct {
enum OpalMemErr_ResilErrType resil_err_type:8;
uint8_t reserved_1[7];
- uint64_t physical_address_start;
- uint64_t physical_address_end;
+ __be64 physical_address_start;
+ __be64 physical_address_end;
} resilience;
/* Dynamic memory deallocation error info */
struct {
enum OpalMemErr_DynErrType dyn_err_type:8;
uint8_t reserved_1[7];
- uint64_t physical_address_start;
- uint64_t physical_address_end;
+ __be64 physical_address_start;
+ __be64 physical_address_end;
} dyn_dealloc;
} u;
};
@@ -725,6 +726,11 @@ struct OpalIoPhb3ErrorData {
uint64_t pestB[OPAL_PHB3_NUM_PEST_REGS];
};
+enum {
+ OPAL_REINIT_CPUS_HILE_BE = (1 << 0),
+ OPAL_REINIT_CPUS_HILE_LE = (1 << 1),
+};
+
typedef struct oppanel_line {
const char * line;
uint64_t line_len;
@@ -849,6 +855,7 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
uint16_t *pci_error_type, uint16_t *severity);
int64_t opal_pci_poll(uint64_t phb_id);
int64_t opal_return_cpu(void);
+int64_t opal_reinit_cpus(uint64_t flags);
int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val);
int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val);
@@ -916,6 +923,7 @@ extern void opal_get_rtc_time(struct rtc_time *tm);
extern unsigned long opal_get_boot_time(void);
extern void opal_nvram_init(void);
extern void opal_flash_init(void);
+extern void opal_flash_term_callback(void);
extern int opal_elog_init(void);
extern void opal_platform_dump_init(void);
extern void opal_sys_param_init(void);
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 8e956a0b6e85ac4474b71373fee731bc7f5d6044..bb0bd25f20d0aeb7b43ac061e3c59835955f1c8b 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -92,7 +92,10 @@ struct paca_struct {
struct slb_shadow *slb_shadow_ptr;
struct dtl_entry *dispatch_log;
struct dtl_entry *dispatch_log_end;
+#endif /* CONFIG_PPC_STD_MMU_64 */
+ u64 dscr_default; /* per-CPU default DSCR */
+#ifdef CONFIG_PPC_STD_MMU_64
/*
* Now, starting in cacheline 2, the exception save areas
*/
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index ed57fa7920c88dd123fcf139353489fcef4746c0..db1e2b8eff3c4e813d5840b9294128685e8a6b52 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -58,6 +58,7 @@ int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
void eeh_pe_state_mark(struct eeh_pe *pe, int state);
void eeh_pe_state_clear(struct eeh_pe *pe, int state);
+void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode);
void eeh_sysfs_add_device(struct pci_dev *pdev);
void eeh_sysfs_remove_device(struct pci_dev *pdev);
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index cded7c1278ef0c419b134cabc74292209391b5c6..9ea266eae33e235cde422eaaf8c86e9fc9275236 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -57,7 +57,7 @@ BEGIN_FW_FTR_SECTION; \
LDX_BE r10,0,r10; /* get log write index */ \
cmpd cr1,r11,r10; \
beq+ cr1,33f; \
- bl .accumulate_stolen_time; \
+ bl accumulate_stolen_time; \
ld r12,_MSR(r1); \
andi. r10,r12,MSR_PR; /* Restore cr0 (coming from user) */ \
33: \
@@ -189,57 +189,53 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#define __STK_REG(i) (112 + ((i)-14)*8)
#define STK_REG(i) __STK_REG(__REG_##i)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define STK_GOT 24
+#define __STK_PARAM(i) (32 + ((i)-3)*8)
+#else
+#define STK_GOT 40
#define __STK_PARAM(i) (48 + ((i)-3)*8)
+#endif
#define STK_PARAM(i) __STK_PARAM(__REG_##i)
-#define XGLUE(a,b) a##b
-#define GLUE(a,b) XGLUE(a,b)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
#define _GLOBAL(name) \
.section ".text"; \
.align 2 ; \
+ .type name,@function; \
.globl name; \
- .globl GLUE(.,name); \
- .section ".opd","aw"; \
-name: \
- .quad GLUE(.,name); \
- .quad .TOC.@tocbase; \
- .quad 0; \
- .previous; \
- .type GLUE(.,name),@function; \
-GLUE(.,name):
+name:
-#define _INIT_GLOBAL(name) \
- __REF; \
+#define _GLOBAL_TOC(name) \
+ .section ".text"; \
.align 2 ; \
+ .type name,@function; \
.globl name; \
- .globl GLUE(.,name); \
- .section ".opd","aw"; \
name: \
- .quad GLUE(.,name); \
- .quad .TOC.@tocbase; \
- .quad 0; \
- .previous; \
- .type GLUE(.,name),@function; \
-GLUE(.,name):
+0: addis r2,r12,(.TOC.-0b)@ha; \
+ addi r2,r2,(.TOC.-0b)@l; \
+ .localentry name,.-name
#define _KPROBE(name) \
.section ".kprobes.text","a"; \
.align 2 ; \
+ .type name,@function; \
.globl name; \
- .globl GLUE(.,name); \
- .section ".opd","aw"; \
-name: \
- .quad GLUE(.,name); \
- .quad .TOC.@tocbase; \
- .quad 0; \
- .previous; \
- .type GLUE(.,name),@function; \
-GLUE(.,name):
+name:
+
+#define DOTSYM(a) a
+
+#else
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
-#define _STATIC(name) \
+#define _GLOBAL(name) \
.section ".text"; \
.align 2 ; \
+ .globl name; \
+ .globl GLUE(.,name); \
.section ".opd","aw"; \
name: \
.quad GLUE(.,name); \
@@ -249,9 +245,13 @@ name: \
.type GLUE(.,name),@function; \
GLUE(.,name):
-#define _INIT_STATIC(name) \
- __REF; \
+#define _GLOBAL_TOC(name) _GLOBAL(name)
+
+#define _KPROBE(name) \
+ .section ".kprobes.text","a"; \
.align 2 ; \
+ .globl name; \
+ .globl GLUE(.,name); \
.section ".opd","aw"; \
name: \
.quad GLUE(.,name); \
@@ -261,6 +261,10 @@ name: \
.type GLUE(.,name),@function; \
GLUE(.,name):
+#define DOTSYM(a) GLUE(.,a)
+
+#endif
+
#else /* 32-bit */
#define _ENTRY(n) \
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index d660dc36831afd5420c6da1dc1a35e9ee9eb6234..6d59072e13a7c9244ed3c8716389a433dddb73cf 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -449,7 +449,7 @@ extern unsigned long cpuidle_disable;
enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
extern int powersave_nap; /* set if nap mode can be used in idle loop */
-extern void power7_nap(void);
+extern void power7_nap(int check_irq);
extern void power7_sleep(void);
extern void flush_instruction_cache(void);
extern void hard_reset_now(void);
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 4852bcf270f37a30b68519e8b0ce3b52c5fe7d8c..bffd89d27301db29594688225eb83b1033f5d2e2 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -215,6 +215,7 @@
#define SPRN_TEXASR 0x82 /* Transaction EXception & Summary */
#define TEXASR_FS __MASK(63-36) /* Transaction Failure Summary */
#define SPRN_TEXASRU 0x83 /* '' '' '' Upper 32 */
+#define TEXASR_FS __MASK(63-36) /* TEXASR Failure Summary */
#define SPRN_TFHAR 0x80 /* Transaction Failure Handler Addr */
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
@@ -224,6 +225,7 @@
#define CTRL_TE 0x00c00000 /* thread enable */
#define CTRL_RUNLATCH 0x1
#define SPRN_DAWR 0xB4
+#define SPRN_RPR 0xBA /* Relative Priority Register */
#define SPRN_CIABR 0xBB
#define CIABR_PRIV 0x3
#define CIABR_PRIV_USER 1
@@ -272,8 +274,10 @@
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
#define SPRN_IC 0x350 /* Virtual Instruction Count */
#define SPRN_VTB 0x351 /* Virtual Time Base */
+#define SPRN_LDBAR 0x352 /* LD Base Address Register */
#define SPRN_PMICR 0x354 /* Power Management Idle Control Reg */
#define SPRN_PMSR 0x355 /* Power Management Status Reg */
+#define SPRN_PMMAR 0x356 /* Power Management Memory Activity Register */
#define SPRN_PMCR 0x374 /* Power Management Control Register */
/* HFSCR and FSCR bit numbers are the same */
@@ -433,6 +437,12 @@
#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
+/* POWER8 HID0 bits */
+#define HID0_POWER8_4LPARMODE __MASK(61)
+#define HID0_POWER8_2LPARMODE __MASK(57)
+#define HID0_POWER8_1TO2LPAR __MASK(52)
+#define HID0_POWER8_1TO4LPAR __MASK(51)
+#define HID0_POWER8_DYNLPARDIS __MASK(48)
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#ifdef CONFIG_6xx
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 52179033067262f8f107be29c16b1fba6b8d4cee..a5e930aca804341a21cd90a0c8f2b4367de18e3f 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -50,6 +50,7 @@ static inline int overlaps_kvm_tmp(unsigned long start, unsigned long end)
#endif
}
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
#undef dereference_function_descriptor
static inline void *dereference_function_descriptor(void *ptr)
{
@@ -60,6 +61,7 @@ static inline void *dereference_function_descriptor(void *ptr)
ptr = p;
return ptr;
}
+#endif
#endif
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ff51046b6466993ead747864b115facbd08af6b4..5a6614a7f0b23b45c65caaddf690d3c24b6effc0 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -68,14 +68,6 @@ void generic_mach_cpu_die(void);
void generic_set_cpu_dead(unsigned int cpu);
void generic_set_cpu_up(unsigned int cpu);
int generic_check_cpu_restart(unsigned int cpu);
-
-extern void inhibit_secondary_onlining(void);
-extern void uninhibit_secondary_onlining(void);
-
-#else /* HOTPLUG_CPU */
-static inline void inhibit_secondary_onlining(void) {}
-static inline void uninhibit_secondary_onlining(void) {}
-
#endif
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
index 0dffad6bcc846725a273daff18593c7b03305060..e40010abcaf134f53bbcf639bf6999b856a42a2a 100644
--- a/arch/powerpc/include/asm/string.h
+++ b/arch/powerpc/include/asm/string.h
@@ -10,9 +10,7 @@
#define __HAVE_ARCH_STRNCMP
#define __HAVE_ARCH_STRCAT
#define __HAVE_ARCH_MEMSET
-#ifdef __BIG_ENDIAN__
#define __HAVE_ARCH_MEMCPY
-#endif
#define __HAVE_ARCH_MEMMOVE
#define __HAVE_ARCH_MEMCMP
#define __HAVE_ARCH_MEMCHR
@@ -24,9 +22,7 @@ extern int strcmp(const char *,const char *);
extern int strncmp(const char *, const char *, __kernel_size_t);
extern char * strcat(char *, const char *);
extern void * memset(void *,int,__kernel_size_t);
-#ifdef __BIG_ENDIAN__
extern void * memcpy(void *,const void *,__kernel_size_t);
-#endif
extern void * memmove(void *,const void *,__kernel_size_t);
extern int memcmp(const void *,const void *,__kernel_size_t);
extern void * memchr(const void *,int,__kernel_size_t);
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index ea4dc3a89c1f05d91390cdf9c498029617fdf7f4..babbeca6850f8f8fd090c59e8559d382243c32d4 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -62,7 +62,7 @@ COMPAT_SYS_SPU(fcntl)
SYSCALL(ni_syscall)
SYSCALL_SPU(setpgid)
SYSCALL(ni_syscall)
-SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+SYSX(sys_ni_syscall,sys_olduname,sys_olduname)
SYSCALL_SPU(umask)
SYSCALL_SPU(chroot)
COMPAT_SYS(ustat)
@@ -190,7 +190,7 @@ SYSCALL_SPU(getcwd)
SYSCALL_SPU(capget)
SYSCALL_SPU(capset)
COMPAT_SYS(sigaltstack)
-COMPAT_SYS_SPU(sendfile)
+SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
SYSCALL(ni_syscall)
SYSCALL(ni_syscall)
PPC_SYS(vfork)
@@ -258,7 +258,7 @@ SYSCALL_SPU(tgkill)
COMPAT_SYS_SPU(utimes)
COMPAT_SYS_SPU(statfs64)
COMPAT_SYS_SPU(fstatfs64)
-SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+SYSX(sys_ni_syscall,ppc_fadvise64_64,ppc_fadvise64_64)
PPC_SYS_SPU(rtas)
OLDSYS(debug_setcontext)
SYSCALL(ni_syscall)
@@ -295,7 +295,7 @@ SYSCALL_SPU(mkdirat)
SYSCALL_SPU(mknodat)
SYSCALL_SPU(fchownat)
COMPAT_SYS_SPU(futimesat)
-SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSX_SPU(sys_newfstatat,sys_fstatat64,sys_fstatat64)
SYSCALL_SPU(unlinkat)
SYSCALL_SPU(renameat)
SYSCALL_SPU(linkat)
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 6c8a8c5a37a1cc761386ba89db9e6136fca5f3c2..5f1048eaa5b6041d1194457bec16509dcabe7907 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -16,19 +16,6 @@ struct device_node;
#include <asm/mmzone.h>
-static inline int cpu_to_node(int cpu)
-{
- int nid;
-
- nid = numa_cpu_lookup_table[cpu];
-
- /*
- * During early boot, the numa-cpu lookup table might not have been
- * setup for all CPUs yet. In such cases, default to node 0.
- */
- return (nid < 0) ? 0 : nid;
-}
-
#define parent_node(node) (node)
#define cpumask_of_node(node) ((node) == -1 ? \
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index 48be855ef37b294cf034db138842cf56526ff4ea..7a3f795ac218fb37433dfc3542bfc8ce5ec42a4f 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -15,7 +15,6 @@ header-y += ioctls.h
header-y += ipcbuf.h
header-y += kvm.h
header-y += kvm_para.h
-header-y += linkage.h
header-y += mman.h
header-y += msgbuf.h
header-y += nvram.h
diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h
index 7e39c9146a71f63c1701118ec4a2e16a243341b5..59dad113897b0b65f6c616df175a596d901dab77 100644
--- a/arch/powerpc/include/uapi/asm/elf.h
+++ b/arch/powerpc/include/uapi/asm/elf.h
@@ -291,9 +291,17 @@ do { \
#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */
#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */
#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */
+#define R_PPC64_TLSGD 107
+#define R_PPC64_TLSLD 108
+#define R_PPC64_TOCSAVE 109
+
+#define R_PPC64_REL16 249
+#define R_PPC64_REL16_LO 250
+#define R_PPC64_REL16_HI 251
+#define R_PPC64_REL16_HA 252
/* Keep this the last entry. */
-#define R_PPC64_NUM 107
+#define R_PPC64_NUM 253
/* There's actually a third entry here, but it's unused */
struct ppc64_opd_entry
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 93e1465c849681729b0b158097562246cf8cd685..f5995a912213f7cf9ecc9c1a2c083bfa7697f3f4 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -248,6 +248,7 @@ int main(void)
#endif
DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
+ DEFINE(PACA_DSCR, offsetof(struct paca_struct, dscr_default));
DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime));
DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user));
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index cc2d8962e0906b78b4fe9f0c6e18a6991b66b60e..4f1393d200792980c9f7b77c03c92eac9538d70f 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -94,12 +94,12 @@ _GLOBAL(setup_altivec_idle)
_GLOBAL(__setup_cpu_e6500)
mflr r6
#ifdef CONFIG_PPC64
- bl .setup_altivec_ivors
+ bl setup_altivec_ivors
/* Touch IVOR42 only if the CPU supports E.HV category */
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_lrat_ivor
+ bl setup_lrat_ivor
1:
#endif
bl setup_pw20_idle
@@ -164,15 +164,15 @@ _GLOBAL(__setup_cpu_e5500)
#ifdef CONFIG_PPC_BOOK3E_64
_GLOBAL(__restore_cpu_e6500)
mflr r5
- bl .setup_altivec_ivors
+ bl setup_altivec_ivors
/* Touch IVOR42 only if the CPU supports E.HV category */
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_lrat_ivor
+ bl setup_lrat_ivor
1:
- bl .setup_pw20_idle
- bl .setup_altivec_idle
+ bl setup_pw20_idle
+ bl setup_altivec_idle
bl __restore_cpu_e5500
mtlr r5
blr
@@ -181,9 +181,9 @@ _GLOBAL(__restore_cpu_e5500)
mflr r4
bl __e500_icache_setup
bl __e500_dcache_setup
- bl .__setup_base_ivors
- bl .setup_perfmon_ivor
- bl .setup_doorbell_ivors
+ bl __setup_base_ivors
+ bl setup_perfmon_ivor
+ bl setup_doorbell_ivors
/*
* We only want to touch IVOR38-41 if we're running on hardware
* that supports category E.HV. The architectural way to determine
@@ -192,7 +192,7 @@ _GLOBAL(__restore_cpu_e5500)
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_ehv_ivors
+ bl setup_ehv_ivors
1:
mtlr r4
blr
@@ -201,9 +201,9 @@ _GLOBAL(__setup_cpu_e5500)
mflr r5
bl __e500_icache_setup
bl __e500_dcache_setup
- bl .__setup_base_ivors
- bl .setup_perfmon_ivor
- bl .setup_doorbell_ivors
+ bl __setup_base_ivors
+ bl setup_perfmon_ivor
+ bl setup_doorbell_ivors
/*
* We only want to touch IVOR38-41 if we're running on hardware
* that supports category E.HV. The architectural way to determine
@@ -212,7 +212,7 @@ _GLOBAL(__setup_cpu_e5500)
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_ehv_ivors
+ bl setup_ehv_ivors
b 2f
1:
ld r10,CPU_SPEC_FEATURES(r4)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index e7b76a6bf15083704136459dc1dc69f2c6c9183e..7051ea3101b96af830faf0e44eadeb70884fb6fc 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -22,6 +22,7 @@
*/
#include <linux/delay.h>
+#include <linux/debugfs.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
@@ -35,6 +36,7 @@
#include <linux/of.h>
#include <linux/atomic.h>
+#include <asm/debug.h>
#include <asm/eeh.h>
#include <asm/eeh_event.h>
#include <asm/io.h>
@@ -87,22 +89,21 @@
/* Time to wait for a PCI slot to report status, in milliseconds */
#define PCI_BUS_RESET_WAIT_MSEC (5*60*1000)
-/* Platform dependent EEH operations */
-struct eeh_ops *eeh_ops = NULL;
-
-bool eeh_subsystem_enabled = false;
-EXPORT_SYMBOL(eeh_subsystem_enabled);
-
/*
- * EEH probe mode support. The intention is to support multiple
- * platforms for EEH. Some platforms like pSeries do PCI emunation
- * based on device tree. However, other platforms like powernv probe
- * PCI devices from hardware. The flag is used to distinguish that.
- * In addition, struct eeh_ops::probe would be invoked for particular
- * OF node or PCI device so that the corresponding PE would be created
- * there.
+ * EEH probe mode support, which is part of the flags,
+ * is to support multiple platforms for EEH. Some platforms
+ * like pSeries do PCI emunation based on device tree.
+ * However, other platforms like powernv probe PCI devices
+ * from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for
+ * particular OF node or PCI device so that the corresponding
+ * PE would be created there.
*/
-int eeh_probe_mode;
+int eeh_subsystem_flags;
+EXPORT_SYMBOL(eeh_subsystem_flags);
+
+/* Platform dependent EEH operations */
+struct eeh_ops *eeh_ops = NULL;
/* Lock to avoid races due to multiple reports of an error */
DEFINE_RAW_SPINLOCK(confirm_error_lock);
@@ -133,6 +134,15 @@ static struct eeh_stats eeh_stats;
#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
+static int __init eeh_setup(char *str)
+{
+ if (!strcmp(str, "off"))
+ eeh_subsystem_flags |= EEH_FORCE_DISABLED;
+
+ return 1;
+}
+__setup("eeh=", eeh_setup);
+
/**
* eeh_gather_pci_data - Copy assorted PCI config space registers to buff
* @edev: device to report data for
@@ -145,73 +155,67 @@ static struct eeh_stats eeh_stats;
static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
{
struct device_node *dn = eeh_dev_to_of_node(edev);
- struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
u32 cfg;
int cap, i;
int n = 0;
n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
- printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name);
+ pr_warn("EEH: of node=%s\n", dn->full_name);
eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
- printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
+ pr_warn("EEH: PCI device/vendor: %08x\n", cfg);
eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
- printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
-
- if (!dev) {
- printk(KERN_WARNING "EEH: no PCI device for this of node\n");
- return n;
- }
+ pr_warn("EEH: PCI cmd/status register: %08x\n", cfg);
/* Gather bridge-specific registers */
- if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
+ if (edev->mode & EEH_DEV_BRIDGE) {
eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
- printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
+ pr_warn("EEH: Bridge secondary status: %04x\n", cfg);
eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
- printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
+ pr_warn("EEH: Bridge control: %04x\n", cfg);
}
/* Dump out the PCI-X command and status regs */
- cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ cap = edev->pcix_cap;
if (cap) {
eeh_ops->read_config(dn, cap, 4, &cfg);
n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
- printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
+ pr_warn("EEH: PCI-X cmd: %08x\n", cfg);
eeh_ops->read_config(dn, cap+4, 4, &cfg);
n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
- printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
+ pr_warn("EEH: PCI-X status: %08x\n", cfg);
}
- /* If PCI-E capable, dump PCI-E cap 10, and the AER */
- if (pci_is_pcie(dev)) {
+ /* If PCI-E capable, dump PCI-E cap 10 */
+ cap = edev->pcie_cap;
+ if (cap) {
n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
- printk(KERN_WARNING
- "EEH: PCI-E capabilities and status follow:\n");
+ pr_warn("EEH: PCI-E capabilities and status follow:\n");
for (i=0; i<=8; i++) {
- eeh_ops->read_config(dn, dev->pcie_cap+4*i, 4, &cfg);
+ eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
- printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
+ pr_warn("EEH: PCI-E %02x: %08x\n", i, cfg);
}
+ }
- cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (cap) {
- n += scnprintf(buf+n, len-n, "pci-e AER:\n");
- printk(KERN_WARNING
- "EEH: PCI-E AER capability register set follows:\n");
-
- for (i=0; i<14; i++) {
- eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
- n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
- printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
- }
+ /* If AER capable, dump it */
+ cap = edev->aer_cap;
+ if (cap) {
+ n += scnprintf(buf+n, len-n, "pci-e AER:\n");
+ pr_warn("EEH: PCI-E AER capability register set follows:\n");
+
+ for (i=0; i<14; i++) {
+ eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+ pr_warn("EEH: PCI-E AER %02x: %08x\n", i, cfg);
}
}
@@ -232,21 +236,19 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
{
size_t loglen = 0;
struct eeh_dev *edev, *tmp;
- bool valid_cfg_log = true;
/*
* When the PHB is fenced or dead, it's pointless to collect
* the data from PCI config space because it should return
* 0xFF's. For ER, we still retrieve the data from the PCI
* config space.
+ *
+ * For pHyp, we have to enable IO for log retrieval. Otherwise,
+ * 0xFF's is always returned from PCI config space.
*/
- if (eeh_probe_mode_dev() &&
- (pe->type & EEH_PE_PHB) &&
- (pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD)))
- valid_cfg_log = false;
-
- if (valid_cfg_log) {
- eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+ if (!(pe->type & EEH_PE_PHB)) {
+ if (eeh_probe_mode_devtree())
+ eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
@@ -309,7 +311,7 @@ static int eeh_phb_check_failure(struct eeh_pe *pe)
/* If the PHB has been in problematic state */
eeh_serialize_lock(&flags);
- if (phb_pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD)) {
+ if (phb_pe->state & EEH_PE_ISOLATED) {
ret = 0;
goto out;
}
@@ -515,16 +517,42 @@ EXPORT_SYMBOL(eeh_check_failure);
*/
int eeh_pci_enable(struct eeh_pe *pe, int function)
{
- int rc;
+ int rc, flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+
+ /*
+ * pHyp doesn't allow to enable IO or DMA on unfrozen PE.
+ * Also, it's pointless to enable them on unfrozen PE. So
+ * we have the check here.
+ */
+ if (function == EEH_OPT_THAW_MMIO ||
+ function == EEH_OPT_THAW_DMA) {
+ rc = eeh_ops->get_state(pe, NULL);
+ if (rc < 0)
+ return rc;
+
+ /* Needn't to enable or already enabled */
+ if ((rc == EEH_STATE_NOT_SUPPORT) ||
+ ((rc & flags) == flags))
+ return 0;
+ }
rc = eeh_ops->set_option(pe, function);
if (rc)
- pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n",
- __func__, function, pe->phb->global_number, pe->addr, rc);
+ pr_warn("%s: Unexpected state change %d on "
+ "PHB#%d-PE#%x, err=%d\n",
+ __func__, function, pe->phb->global_number,
+ pe->addr, rc);
rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
- if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
- (function == EEH_OPT_THAW_MMIO))
+ if (rc <= 0)
+ return rc;
+
+ if ((function == EEH_OPT_THAW_MMIO) &&
+ (rc & EEH_STATE_MMIO_ENABLED))
+ return 0;
+
+ if ((function == EEH_OPT_THAW_DMA) &&
+ (rc & EEH_STATE_DMA_ENABLED))
return 0;
return rc;
@@ -612,26 +640,7 @@ static void eeh_reset_pe_once(struct eeh_pe *pe)
else
eeh_ops->reset(pe, EEH_RESET_HOT);
- /* The PCI bus requires that the reset be held high for at least
- * a 100 milliseconds. We wait a bit longer 'just in case'.
- */
-#define PCI_BUS_RST_HOLD_TIME_MSEC 250
- msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
-
- /* We might get hit with another EEH freeze as soon as the
- * pci slot reset line is dropped. Make sure we don't miss
- * these, and clear the flag now.
- */
- eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
-
eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
-
- /* After a PCI slot has been reset, the PCI Express spec requires
- * a 1.5 second idle time for the bus to stabilize, before starting
- * up traffic.
- */
-#define PCI_BUS_SETTLE_TIME_MSEC 1800
- msleep(PCI_BUS_SETTLE_TIME_MSEC);
}
/**
@@ -651,6 +660,10 @@ int eeh_reset_pe(struct eeh_pe *pe)
for (i=0; i<3; i++) {
eeh_reset_pe_once(pe);
+ /*
+ * EEH_PE_ISOLATED is expected to be removed after
+ * BAR restore.
+ */
rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
if ((rc & flags) == flags)
return 0;
@@ -826,8 +839,8 @@ int eeh_init(void)
&hose_list, list_node)
pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL);
} else {
- pr_warning("%s: Invalid probe mode %d\n",
- __func__, eeh_probe_mode);
+ pr_warn("%s: Invalid probe mode %x",
+ __func__, eeh_subsystem_flags);
return -EINVAL;
}
@@ -1102,10 +1115,45 @@ static const struct file_operations proc_eeh_operations = {
.release = single_release,
};
+#ifdef CONFIG_DEBUG_FS
+static int eeh_enable_dbgfs_set(void *data, u64 val)
+{
+ if (val)
+ eeh_subsystem_flags &= ~EEH_FORCE_DISABLED;
+ else
+ eeh_subsystem_flags |= EEH_FORCE_DISABLED;
+
+ /* Notify the backend */
+ if (eeh_ops->post_init)
+ eeh_ops->post_init();
+
+ return 0;
+}
+
+static int eeh_enable_dbgfs_get(void *data, u64 *val)
+{
+ if (eeh_enabled())
+ *val = 0x1ul;
+ else
+ *val = 0x0ul;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(eeh_enable_dbgfs_ops, eeh_enable_dbgfs_get,
+ eeh_enable_dbgfs_set, "0x%llx\n");
+#endif
+
static int __init eeh_init_proc(void)
{
- if (machine_is(pseries) || machine_is(powernv))
+ if (machine_is(pseries) || machine_is(powernv)) {
proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
+#ifdef CONFIG_DEBUG_FS
+ debugfs_create_file("eeh_enable", 0600,
+ powerpc_debugfs_root, NULL,
+ &eeh_enable_dbgfs_ops);
+#endif
+ }
+
return 0;
}
__initcall(eeh_init_proc);
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index bb61ca58ca6d8272955d7023852f97cbe180c676..7100a5b96e7059caf572609dec9d7f9393f0106f 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -171,6 +171,15 @@ static void eeh_enable_irq(struct pci_dev *dev)
}
}
+static bool eeh_dev_removed(struct eeh_dev *edev)
+{
+ /* EEH device removed ? */
+ if (!edev || (edev->mode & EEH_DEV_REMOVED))
+ return true;
+
+ return false;
+}
+
/**
* eeh_report_error - Report pci error to each device driver
* @data: eeh device
@@ -187,10 +196,8 @@ static void *eeh_report_error(void *data, void *userdata)
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver;
- /* We might not have the associated PCI device,
- * then we should continue for next one.
- */
- if (!dev) return NULL;
+ if (!dev || eeh_dev_removed(edev))
+ return NULL;
dev->error_state = pci_channel_io_frozen;
driver = eeh_pcid_get(dev);
@@ -230,6 +237,9 @@ static void *eeh_report_mmio_enabled(void *data, void *userdata)
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver;
+ if (!dev || eeh_dev_removed(edev))
+ return NULL;
+
driver = eeh_pcid_get(dev);
if (!driver) return NULL;
@@ -267,7 +277,8 @@ static void *eeh_report_reset(void *data, void *userdata)
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver;
- if (!dev) return NULL;
+ if (!dev || eeh_dev_removed(edev))
+ return NULL;
dev->error_state = pci_channel_io_normal;
driver = eeh_pcid_get(dev);
@@ -307,7 +318,8 @@ static void *eeh_report_resume(void *data, void *userdata)
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
struct pci_driver *driver;
- if (!dev) return NULL;
+ if (!dev || eeh_dev_removed(edev))
+ return NULL;
dev->error_state = pci_channel_io_normal;
driver = eeh_pcid_get(dev);
@@ -343,7 +355,8 @@ static void *eeh_report_failure(void *data, void *userdata)
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
struct pci_driver *driver;
- if (!dev) return NULL;
+ if (!dev || eeh_dev_removed(edev))
+ return NULL;
dev->error_state = pci_channel_io_perm_failure;
driver = eeh_pcid_get(dev);
@@ -380,6 +393,16 @@ static void *eeh_rmv_device(void *data, void *userdata)
if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
return NULL;
+ /*
+ * We rely on count-based pcibios_release_device() to
+ * detach permanently offlined PEs. Unfortunately, that's
+ * not reliable enough. We might have the permanently
+ * offlined PEs attached, but we needn't take care of
+ * them and their child devices.
+ */
+ if (eeh_dev_removed(edev))
+ return NULL;
+
driver = eeh_pcid_get(dev);
if (driver) {
eeh_pcid_put(dev);
@@ -417,6 +440,36 @@ static void *eeh_pe_detach_dev(void *data, void *userdata)
return NULL;
}
+/*
+ * Explicitly clear PE's frozen state for PowerNV where
+ * we have frozen PE until BAR restore is completed. It's
+ * harmless to clear it for pSeries. To be consistent with
+ * PE reset (for 3 times), we try to clear the frozen state
+ * for 3 times as well.
+ */
+static int eeh_clear_pe_frozen_state(struct eeh_pe *pe)
+{
+ int i, rc;
+
+ for (i = 0; i < 3; i++) {
+ rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+ if (rc)
+ continue;
+ rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
+ if (!rc)
+ break;
+ }
+
+ /* The PE has been isolated, clear it */
+ if (rc)
+ pr_warn("%s: Can't clear frozen PHB#%x-PE#%x (%d)\n",
+ __func__, pe->phb->global_number, pe->addr, rc);
+ else
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
+
+ return rc;
+}
+
/**
* eeh_reset_device - Perform actual reset of a pci slot
* @pe: EEH PE
@@ -451,19 +504,33 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
}
- /* Reset the pci controller. (Asserts RST#; resets config space).
+ /*
+ * Reset the pci controller. (Asserts RST#; resets config space).
* Reconfigure bridges and devices. Don't try to bring the system
* up if the reset failed for some reason.
+ *
+ * During the reset, it's very dangerous to have uncontrolled PCI
+ * config accesses. So we prefer to block them. However, controlled
+ * PCI config accesses initiated from EEH itself are allowed.
*/
+ eeh_pe_state_mark(pe, EEH_PE_RESET);
rc = eeh_reset_pe(pe);
- if (rc)
+ if (rc) {
+ eeh_pe_state_clear(pe, EEH_PE_RESET);
return rc;
+ }
pci_lock_rescan_remove();
/* Restore PE */
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
+ eeh_pe_state_clear(pe, EEH_PE_RESET);
+
+ /* Clear frozen state */
+ rc = eeh_clear_pe_frozen_state(pe);
+ if (rc)
+ return rc;
/* Give the system 5 seconds to finish running the user-space
* hotplug shutdown scripts, e.g. ifdown for ethernet. Yes,
@@ -573,7 +640,6 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
result = PCI_ERS_RESULT_NEED_RESET;
} else {
pr_info("EEH: Notify device drivers to resume I/O\n");
- result = PCI_ERS_RESULT_NONE;
eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result);
}
}
@@ -585,10 +651,17 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
if (rc < 0)
goto hard_fail;
- if (rc)
+ if (rc) {
result = PCI_ERS_RESULT_NEED_RESET;
- else
+ } else {
+ /*
+ * We didn't do PE reset for the case. The PE
+ * is still in frozen state. Clear it before
+ * resuming the PE.
+ */
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
result = PCI_ERS_RESULT_RECOVERED;
+ }
}
/* If any device has a hard failure, then shut off everything. */
@@ -650,8 +723,17 @@ perm_error:
/* Notify all devices that they're about to go down. */
eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
- /* Shut down the device drivers for good. */
+ /* Mark the PE to be removed permanently */
+ pe->freeze_count = EEH_MAX_ALLOWED_FREEZES + 1;
+
+ /*
+ * Shut down the device drivers for good. We mark
+ * all removed devices correctly to avoid access
+ * the their PCI config any more.
+ */
if (frozen_bus) {
+ eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+
pci_lock_rescan_remove();
pcibios_remove_pci_devices(frozen_bus);
pci_unlock_rescan_remove();
@@ -682,8 +764,7 @@ static void eeh_handle_special_event(void)
phb_pe = eeh_phb_pe_get(hose);
if (!phb_pe) continue;
- eeh_pe_state_mark(phb_pe,
- EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+ eeh_pe_state_mark(phb_pe, EEH_PE_ISOLATED);
}
eeh_serialize_unlock(flags);
@@ -699,8 +780,7 @@ static void eeh_handle_special_event(void)
eeh_remove_event(pe);
if (rc == EEH_NEXT_ERR_DEAD_PHB)
- eeh_pe_state_mark(pe,
- EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
else
eeh_pe_state_mark(pe,
EEH_PE_ISOLATED | EEH_PE_RECOVERING);
@@ -724,12 +804,14 @@ static void eeh_handle_special_event(void)
if (rc == EEH_NEXT_ERR_FROZEN_PE ||
rc == EEH_NEXT_ERR_FENCED_PHB) {
eeh_handle_normal_event(pe);
+ eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
} else {
pci_lock_rescan_remove();
list_for_each_entry(hose, &hose_list, list_node) {
phb_pe = eeh_phb_pe_get(hose);
if (!phb_pe ||
- !(phb_pe->state & EEH_PE_PHB_DEAD))
+ !(phb_pe->state & EEH_PE_ISOLATED) ||
+ (phb_pe->state & EEH_PE_RECOVERING))
continue;
/* Notify all devices to be down */
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index f0c353fa655a3a5a742e2de674851ab3ca88006a..995c2a2846303d3885674d474bcbfd0cae90f9cc 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -503,13 +503,17 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
struct eeh_dev *edev, *tmp;
struct pci_dev *pdev;
- /*
- * Mark the PE with the indicated state. Also,
- * the associated PCI device will be put into
- * I/O frozen state to avoid I/O accesses from
- * the PCI device driver.
- */
+ /* Keep the state of permanently removed PE intact */
+ if ((pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) &&
+ (state & (EEH_PE_ISOLATED | EEH_PE_RECOVERING)))
+ return NULL;
+
pe->state |= state;
+
+ /* Offline PCI devices if applicable */
+ if (state != EEH_PE_ISOLATED)
+ return NULL;
+
eeh_pe_for_each_dev(pe, edev, tmp) {
pdev = eeh_dev_to_pci_dev(edev);
if (pdev)
@@ -532,6 +536,27 @@ void eeh_pe_state_mark(struct eeh_pe *pe, int state)
eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
}
+static void *__eeh_pe_dev_mode_mark(void *data, void *flag)
+{
+ struct eeh_dev *edev = data;
+ int mode = *((int *)flag);
+
+ edev->mode |= mode;
+
+ return NULL;
+}
+
+/**
+ * eeh_pe_dev_state_mark - Mark state for all device under the PE
+ * @pe: EEH PE
+ *
+ * Mark specific state for all child devices of the PE.
+ */
+void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode)
+{
+ eeh_pe_dev_traverse(pe, __eeh_pe_dev_mode_mark, &mode);
+}
+
/**
* __eeh_pe_state_clear - Clear state for the PE
* @data: EEH PE
@@ -546,8 +571,16 @@ static void *__eeh_pe_state_clear(void *data, void *flag)
struct eeh_pe *pe = (struct eeh_pe *)data;
int state = *((int *)flag);
+ /* Keep the state of permanently removed PE intact */
+ if ((pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) &&
+ (state & EEH_PE_ISOLATED))
+ return NULL;
+
pe->state &= ~state;
- pe->check_count = 0;
+
+ /* Clear check count since last isolation */
+ if (state & EEH_PE_ISOLATED)
+ pe->check_count = 0;
return NULL;
}
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index 5d753d4f2c75938e5fdd2c75b821ff98877cd2c9..e2595ba4b720123ad89908b26bf9f9eeff35255c 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -59,6 +59,9 @@ void eeh_sysfs_add_device(struct pci_dev *pdev)
struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
int rc=0;
+ if (!eeh_enabled())
+ return;
+
if (edev && (edev->mode & EEH_DEV_SYSFS))
return;
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 662c6dd98072e72beabcb1e894cc05999324da81..911d45366f596c764a4ad001025760de4f07c5e8 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -39,8 +39,8 @@
* System calls.
*/
.section ".toc","aw"
-.SYS_CALL_TABLE:
- .tc .sys_call_table[TC],.sys_call_table
+SYS_CALL_TABLE:
+ .tc sys_call_table[TC],sys_call_table
/* This value is used to mark exception frames on the stack. */
exception_marker:
@@ -106,7 +106,7 @@ BEGIN_FW_FTR_SECTION
LDX_BE r10,0,r10 /* get log write index */
cmpd cr1,r11,r10
beq+ cr1,33f
- bl .accumulate_stolen_time
+ bl accumulate_stolen_time
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
@@ -143,7 +143,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
std r10,SOFTE(r1)
#ifdef SHOW_SYSCALLS
- bl .do_show_syscall
+ bl do_show_syscall
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
@@ -162,7 +162,7 @@ system_call: /* label this so stack traces look sane */
* Need to vector to 32 Bit or default sys_call_table here,
* based on caller's run-mode / personality.
*/
- ld r11,.SYS_CALL_TABLE@toc(2)
+ ld r11,SYS_CALL_TABLE@toc(2)
andi. r10,r10,_TIF_32BIT
beq 15f
addi r11,r11,8 /* use 32-bit syscall entries */
@@ -174,14 +174,14 @@ system_call: /* label this so stack traces look sane */
clrldi r8,r8,32
15:
slwi r0,r0,4
- ldx r10,r11,r0 /* Fetch system call handler [ptr] */
- mtctr r10
+ ldx r12,r11,r0 /* Fetch system call handler [ptr] */
+ mtctr r12
bctrl /* Call handler */
syscall_exit:
std r3,RESULT(r1)
#ifdef SHOW_SYSCALLS
- bl .do_show_syscall_exit
+ bl do_show_syscall_exit
ld r3,RESULT(r1)
#endif
CURRENT_THREAD_INFO(r12, r1)
@@ -248,9 +248,9 @@ syscall_error:
/* Traced system call support */
syscall_dotrace:
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_syscall_trace_enter
+ bl do_syscall_trace_enter
/*
* Restore argument registers possibly just changed.
* We use the return value of do_syscall_trace_enter
@@ -308,7 +308,7 @@ syscall_exit_work:
4: /* Anything else left to do? */
SET_DEFAULT_THREAD_PPR(r3, r10) /* Set thread.ppr = 3 */
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq .ret_from_except_lite
+ beq ret_from_except_lite
/* Re-enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
@@ -319,10 +319,10 @@ syscall_exit_work:
mtmsrd r10,1
#endif /* CONFIG_PPC_BOOK3E */
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_syscall_trace_leave
- b .ret_from_except
+ bl do_syscall_trace_leave
+ b ret_from_except
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
@@ -345,52 +345,48 @@ _GLOBAL(save_nvgprs)
*/
_GLOBAL(ppc_fork)
- bl .save_nvgprs
- bl .sys_fork
+ bl save_nvgprs
+ bl sys_fork
b syscall_exit
_GLOBAL(ppc_vfork)
- bl .save_nvgprs
- bl .sys_vfork
+ bl save_nvgprs
+ bl sys_vfork
b syscall_exit
_GLOBAL(ppc_clone)
- bl .save_nvgprs
- bl .sys_clone
+ bl save_nvgprs
+ bl sys_clone
b syscall_exit
_GLOBAL(ppc32_swapcontext)
- bl .save_nvgprs
- bl .compat_sys_swapcontext
+ bl save_nvgprs
+ bl compat_sys_swapcontext
b syscall_exit
_GLOBAL(ppc64_swapcontext)
- bl .save_nvgprs
- bl .sys_swapcontext
+ bl save_nvgprs
+ bl sys_swapcontext
b syscall_exit
_GLOBAL(ret_from_fork)
- bl .schedule_tail
+ bl schedule_tail
REST_NVGPRS(r1)
li r3,0
b syscall_exit
_GLOBAL(ret_from_kernel_thread)
- bl .schedule_tail
+ bl schedule_tail
REST_NVGPRS(r1)
- ld r14, 0(r14)
mtlr r14
mr r3,r15
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+ mr r12,r14
+#endif
blrl
li r3,0
b syscall_exit
- .section ".toc","aw"
-DSCR_DEFAULT:
- .tc dscr_default[TC],dscr_default
-
- .section ".text"
-
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
@@ -575,11 +571,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#ifdef CONFIG_PPC64
BEGIN_FTR_SECTION
lwz r6,THREAD_DSCR_INHERIT(r4)
- ld r7,DSCR_DEFAULT@toc(2)
ld r0,THREAD_DSCR(r4)
cmpwi r6,0
bne 1f
- ld r0,0(r7)
+ ld r0,PACA_DSCR(r13)
1:
BEGIN_FTR_SECTION_NESTED(70)
mfspr r8, SPRN_FSCR
@@ -611,7 +606,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
_GLOBAL(ret_from_except)
ld r11,_TRAP(r1)
andi. r0,r11,1
- bne .ret_from_except_lite
+ bne ret_from_except_lite
REST_NVGPRS(r1)
_GLOBAL(ret_from_except_lite)
@@ -661,23 +656,23 @@ _GLOBAL(ret_from_except_lite)
#endif
1: andi. r0,r4,_TIF_NEED_RESCHED
beq 2f
- bl .restore_interrupts
+ bl restore_interrupts
SCHEDULE_USER
- b .ret_from_except_lite
+ b ret_from_except_lite
2:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
andi. r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
bne 3f /* only restore TM if nothing else to do */
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .restore_tm_state
+ bl restore_tm_state
b restore
3:
#endif
- bl .save_nvgprs
- bl .restore_interrupts
+ bl save_nvgprs
+ bl restore_interrupts
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_notify_resume
- b .ret_from_except
+ bl do_notify_resume
+ b ret_from_except
resume_kernel:
/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
@@ -730,7 +725,7 @@ resume_kernel:
* sure we are soft-disabled first and reconcile irq state.
*/
RECONCILE_IRQ_STATE(r3,r4)
-1: bl .preempt_schedule_irq
+1: bl preempt_schedule_irq
/* Re-test flags and eventually loop */
CURRENT_THREAD_INFO(r9, r1)
@@ -792,7 +787,7 @@ restore_no_replay:
*/
do_restore:
#ifdef CONFIG_PPC_BOOK3E
- b .exception_return_book3e
+ b exception_return_book3e
#else
/*
* Clear the reservation. If we know the CPU tracks the address of
@@ -907,7 +902,7 @@ restore_check_irq_replay:
*
* Still, this might be useful for things like hash_page
*/
- bl .__check_irq_replay
+ bl __check_irq_replay
cmpwi cr0,r3,0
beq restore_no_replay
@@ -928,13 +923,13 @@ restore_check_irq_replay:
cmpwi cr0,r3,0x500
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
- bl .do_IRQ
- b .ret_from_except
+ bl do_IRQ
+ b ret_from_except
1: cmpwi cr0,r3,0x900
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
- bl .timer_interrupt
- b .ret_from_except
+ bl timer_interrupt
+ b ret_from_except
#ifdef CONFIG_PPC_DOORBELL
1:
#ifdef CONFIG_PPC_BOOK3E
@@ -948,14 +943,14 @@ restore_check_irq_replay:
#endif /* CONFIG_PPC_BOOK3E */
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
- bl .doorbell_exception
- b .ret_from_except
+ bl doorbell_exception
+ b ret_from_except
#endif /* CONFIG_PPC_DOORBELL */
-1: b .ret_from_except /* What else to do here ? */
+1: b ret_from_except /* What else to do here ? */
unrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b unrecov_restore
#ifdef CONFIG_PPC_RTAS
@@ -1021,7 +1016,7 @@ _GLOBAL(enter_rtas)
std r6,PACASAVEDMSR(r13)
/* Setup our real return addr */
- LOAD_REG_ADDR(r4,.rtas_return_loc)
+ LOAD_REG_ADDR(r4,rtas_return_loc)
clrldi r4,r4,2 /* convert to realmode address */
mtlr r4
@@ -1045,7 +1040,7 @@ _GLOBAL(enter_rtas)
rfid
b . /* prevent speculative execution */
-_STATIC(rtas_return_loc)
+rtas_return_loc:
FIXUP_ENDIAN
/* relocation is off at this point */
@@ -1054,7 +1049,7 @@ _STATIC(rtas_return_loc)
bcl 20,31,$+4
0: mflr r3
- ld r3,(1f-0b)(r3) /* get &.rtas_restore_regs */
+ ld r3,(1f-0b)(r3) /* get &rtas_restore_regs */
mfmsr r6
li r0,MSR_RI
@@ -1071,9 +1066,9 @@ _STATIC(rtas_return_loc)
b . /* prevent speculative execution */
.align 3
-1: .llong .rtas_restore_regs
+1: .llong rtas_restore_regs
-_STATIC(rtas_restore_regs)
+rtas_restore_regs:
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
REST_GPR(13, r1) /* Restore paca */
@@ -1173,7 +1168,7 @@ _GLOBAL(mcount)
_GLOBAL(_mcount)
blr
-_GLOBAL(ftrace_caller)
+_GLOBAL_TOC(ftrace_caller)
/* Taken from output of objdump from lib64/glibc */
mflr r3
ld r11, 0(r1)
@@ -1197,10 +1192,7 @@ _GLOBAL(ftrace_graph_stub)
_GLOBAL(ftrace_stub)
blr
#else
-_GLOBAL(mcount)
- blr
-
-_GLOBAL(_mcount)
+_GLOBAL_TOC(_mcount)
/* Taken from output of objdump from lib64/glibc */
mflr r3
ld r11, 0(r1)
@@ -1238,7 +1230,7 @@ _GLOBAL(ftrace_graph_caller)
ld r11, 112(r1)
addi r3, r11, 16
- bl .prepare_ftrace_return
+ bl prepare_ftrace_return
nop
ld r0, 128(r1)
@@ -1254,7 +1246,7 @@ _GLOBAL(return_to_handler)
mr r31, r1
stdu r1, -112(r1)
- bl .ftrace_return_to_handler
+ bl ftrace_return_to_handler
nop
/* return value has real return address */
@@ -1284,7 +1276,7 @@ _GLOBAL(mod_return_to_handler)
*/
ld r2, PACATOC(r13)
- bl .ftrace_return_to_handler
+ bl ftrace_return_to_handler
nop
/* return value has real return address */
diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c
index 60d1a2259dbed01e15b58340c62119b4fb56b085..59e4ba74975d9cf6be38ffa9312d2cbe6572a829 100644
--- a/arch/powerpc/kernel/epapr_paravirt.c
+++ b/arch/powerpc/kernel/epapr_paravirt.c
@@ -30,6 +30,7 @@ extern u32 epapr_ev_idle_start[];
#endif
bool epapr_paravirt_enabled;
+static bool __maybe_unused epapr_has_idle;
static int __init early_init_dt_scan_epapr(unsigned long node,
const char *uname,
@@ -56,7 +57,7 @@ static int __init early_init_dt_scan_epapr(unsigned long node,
#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
if (of_get_flat_dt_prop(node, "has-idle", NULL))
- ppc_md.power_save = epapr_ev_idle;
+ epapr_has_idle = true;
#endif
epapr_paravirt_enabled = true;
@@ -71,3 +72,14 @@ int __init epapr_paravirt_early_init(void)
return 0;
}
+static int __init epapr_idle_init(void)
+{
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
+ if (epapr_has_idle)
+ ppc_md.power_save = epapr_ev_idle;
+#endif
+
+ return 0;
+}
+
+postcore_initcall(epapr_idle_init);
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index c1bee3ce9d1fb63530bb886b04e456275279f050..771b4e92e5d9c091fcedfa1dc4982fa6950c1405 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -499,7 +499,7 @@ exc_##n##_bad_stack: \
CHECK_NAPPING(); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
- b .ret_from_except_lite;
+ b ret_from_except_lite;
/* This value is used to mark exception frames on the stack. */
.section ".toc","aw"
@@ -550,11 +550,11 @@ interrupt_end_book3e:
CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x100)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
+ bl unknown_exception
b ret_from_crit_except
/* Machine Check Interrupt */
@@ -562,11 +562,11 @@ interrupt_end_book3e:
MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_MC(0x000)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_exception
+ bl machine_check_exception
b ret_from_mc_except
/* Data Storage Interrupt */
@@ -591,7 +591,7 @@ interrupt_end_book3e:
/* External Input Interrupt */
MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
- external_input, .do_IRQ, ACK_NONE)
+ external_input, do_IRQ, ACK_NONE)
/* Alignment */
START_EXCEPTION(alignment);
@@ -612,9 +612,9 @@ interrupt_end_book3e:
std r14,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
ld r14,PACA_EXGEN+EX_R14(r13)
- bl .save_nvgprs
- bl .program_check_exception
- b .ret_from_except
+ bl save_nvgprs
+ bl program_check_exception
+ b ret_from_except
/* Floating Point Unavailable Interrupt */
START_EXCEPTION(fp_unavailable);
@@ -625,13 +625,13 @@ interrupt_end_book3e:
ld r12,_MSR(r1)
andi. r0,r12,MSR_PR;
beq- 1f
- bl .load_up_fpu
+ bl load_up_fpu
b fast_exception_return
1: INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_fp_unavailable_exception
- b .ret_from_except
+ bl kernel_fp_unavailable_exception
+ b ret_from_except
/* Altivec Unavailable Interrupt */
START_EXCEPTION(altivec_unavailable);
@@ -644,16 +644,16 @@ BEGIN_FTR_SECTION
ld r12,_MSR(r1)
andi. r0,r12,MSR_PR;
beq- 1f
- bl .load_up_altivec
+ bl load_up_altivec
b fast_exception_return
1:
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .altivec_unavailable_exception
- b .ret_from_except
+ bl altivec_unavailable_exception
+ b ret_from_except
/* AltiVec Assist */
START_EXCEPTION(altivec_assist);
@@ -662,39 +662,39 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x220)
INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
- bl .altivec_assist_exception
+ bl altivec_assist_exception
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#else
- bl .unknown_exception
+ bl unknown_exception
#endif
- b .ret_from_except
+ b ret_from_except
/* Decrementer Interrupt */
MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
- decrementer, .timer_interrupt, ACK_DEC)
+ decrementer, timer_interrupt, ACK_DEC)
/* Fixed Interval Timer Interrupt */
MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
- fixed_interval, .unknown_exception, ACK_FIT)
+ fixed_interval, unknown_exception, ACK_FIT)
/* Watchdog Timer Interrupt */
START_EXCEPTION(watchdog);
CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x9f0)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_BOOKE_WDT
- bl .WatchdogException
+ bl WatchdogException
#else
- bl .unknown_exception
+ bl unknown_exception
#endif
b ret_from_crit_except
@@ -712,10 +712,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0xf20)
INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* Debug exception as a critical interrupt*/
START_EXCEPTION(debug_crit);
@@ -774,9 +774,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
mr r4,r14
ld r14,PACA_EXCRIT+EX_R14(r13)
ld r15,PACA_EXCRIT+EX_R15(r13)
- bl .save_nvgprs
- bl .DebugException
- b .ret_from_except
+ bl save_nvgprs
+ bl DebugException
+ b ret_from_except
kernel_dbg_exc:
b . /* NYI */
@@ -839,9 +839,9 @@ kernel_dbg_exc:
mr r4,r14
ld r14,PACA_EXDBG+EX_R14(r13)
ld r15,PACA_EXDBG+EX_R15(r13)
- bl .save_nvgprs
- bl .DebugException
- b .ret_from_except
+ bl save_nvgprs
+ bl DebugException
+ b ret_from_except
START_EXCEPTION(perfmon);
NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
@@ -850,23 +850,23 @@ kernel_dbg_exc:
INTS_DISABLE
CHECK_NAPPING()
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .performance_monitor_exception
- b .ret_from_except_lite
+ bl performance_monitor_exception
+ b ret_from_except_lite
/* Doorbell interrupt */
MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
- doorbell, .doorbell_exception, ACK_NONE)
+ doorbell, doorbell_exception, ACK_NONE)
/* Doorbell critical Interrupt */
START_EXCEPTION(doorbell_crit);
CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x2a0)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
+ bl unknown_exception
b ret_from_crit_except
/*
@@ -878,21 +878,21 @@ kernel_dbg_exc:
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x2c0)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* Guest Doorbell critical Interrupt */
START_EXCEPTION(guest_doorbell_crit);
CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x2e0)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
+ bl unknown_exception
b ret_from_crit_except
/* Hypervisor call */
@@ -901,10 +901,10 @@ kernel_dbg_exc:
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x310)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* Embedded Hypervisor priviledged */
START_EXCEPTION(ehpriv);
@@ -912,10 +912,10 @@ kernel_dbg_exc:
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x320)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* LRAT Error interrupt */
START_EXCEPTION(lrat_error);
@@ -1014,16 +1014,16 @@ storage_fault_common:
mr r5,r15
ld r14,PACA_EXGEN+EX_R14(r13)
ld r15,PACA_EXGEN+EX_R15(r13)
- bl .do_page_fault
+ bl do_page_fault
cmpdi r3,0
bne- 1f
- b .ret_from_except_lite
-1: bl .save_nvgprs
+ b ret_from_except_lite
+1: bl save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
ld r4,_DAR(r1)
- bl .bad_page_fault
- b .ret_from_except
+ bl bad_page_fault
+ b ret_from_except
/*
* Alignment exception doesn't fit entirely in the 0x100 bytes so it
@@ -1035,10 +1035,10 @@ alignment_more:
addi r3,r1,STACK_FRAME_OVERHEAD
ld r14,PACA_EXGEN+EX_R14(r13)
ld r15,PACA_EXGEN+EX_R15(r13)
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .alignment_exception
- b .ret_from_except
+ bl alignment_exception
+ b ret_from_except
/*
* We branch here from entry_64.S for the last stage of the exception
@@ -1172,7 +1172,7 @@ bad_stack_book3e:
std r12,0(r11)
ld r2,PACATOC(r13)
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
+ bl kernel_bad_stack
b 1b
/*
@@ -1521,13 +1521,13 @@ _GLOBAL(start_initialization_book3e)
* and always use AS 0, so we just set it up to match our link
* address and never use 0 based addresses.
*/
- bl .initial_tlb_book3e
+ bl initial_tlb_book3e
/* Init global core bits */
- bl .init_core_book3e
+ bl init_core_book3e
/* Init per-thread bits */
- bl .init_thread_book3e
+ bl init_thread_book3e
/* Return to common init code */
tovirt(r28,r28)
@@ -1548,7 +1548,7 @@ _GLOBAL(start_initialization_book3e)
*/
_GLOBAL(book3e_secondary_core_init_tlb_set)
li r4,1
- b .generic_secondary_smp_init
+ b generic_secondary_smp_init
_GLOBAL(book3e_secondary_core_init)
mflr r28
@@ -1558,18 +1558,18 @@ _GLOBAL(book3e_secondary_core_init)
bne 2f
/* Setup TLB for this core */
- bl .initial_tlb_book3e
+ bl initial_tlb_book3e
/* We can return from the above running at a different
* address, so recalculate r2 (TOC)
*/
- bl .relative_toc
+ bl relative_toc
/* Init global core bits */
-2: bl .init_core_book3e
+2: bl init_core_book3e
/* Init per-thread bits */
-3: bl .init_thread_book3e
+3: bl init_thread_book3e
/* Return to common init code at proper virtual address.
*
@@ -1596,14 +1596,14 @@ _GLOBAL(book3e_secondary_thread_init)
mflr r28
b 3b
-_STATIC(init_core_book3e)
+init_core_book3e:
/* Establish the interrupt vector base */
LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
mtspr SPRN_IVPR,r3
sync
blr
-_STATIC(init_thread_book3e)
+init_thread_book3e:
lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
mtspr SPRN_EPCR,r3
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 3afd3915921a267496eb63c329570cee1906bf14..20f11eb4dff7ee4e308565ec0910f57b5bd189e6 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -132,12 +132,12 @@ BEGIN_FTR_SECTION
#endif
beq cr1,2f
- b .power7_wakeup_noloss
-2: b .power7_wakeup_loss
+ b power7_wakeup_noloss
+2: b power7_wakeup_loss
/* Fast Sleep wakeup on PowerNV */
8: GET_PACA(r13)
- b .power7_wakeup_tb_loss
+ b power7_wakeup_tb_loss
9:
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
@@ -211,16 +211,16 @@ data_access_slb_pSeries:
#endif /* __DISABLED__ */
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
/*
- * We can't just use a direct branch to .slb_miss_realmode
+ * We can't just use a direct branch to slb_miss_realmode
* because the distance from here to there depends on where
* the kernel ends up being put.
*/
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -243,11 +243,11 @@ instruction_access_slb_pSeries:
#endif /* __DISABLED__ */
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -524,7 +524,7 @@ do_stab_bolted_pSeries:
std r12,PACA_EXSLB+EX_R12(r13)
GET_SCRATCH0(r10)
std r10,PACA_EXSLB+EX_R13(r13)
- EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
+ EXCEPTION_PROLOG_PSERIES_1(do_stab_bolted, EXC_STD)
KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
@@ -769,38 +769,38 @@ kvmppc_skip_Hinterrupt:
/*** Common interrupt handlers ***/
- STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+ STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception)
STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
- STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
- STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
+ STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt)
+ STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt)
#ifdef CONFIG_PPC_DOORBELL
- STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception)
#else
- STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception)
#endif
- STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
- STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
- STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt)
- STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception)
+ STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception)
+ STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception)
+ STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt)
+ STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception)
#ifdef CONFIG_PPC_DOORBELL
- STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception)
#else
- STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception)
#endif
- STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
- STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
- STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception)
+ STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception)
+ STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception)
#ifdef CONFIG_ALTIVEC
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception)
#else
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception)
#endif
#ifdef CONFIG_CBE_RAS
- STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
- STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
- STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+ STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception)
+ STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception)
+ STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */
/*
@@ -829,16 +829,16 @@ data_access_slb_relon_pSeries:
mfspr r3,SPRN_DAR
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
/*
- * We can't just use a direct branch to .slb_miss_realmode
+ * We can't just use a direct branch to slb_miss_realmode
* because the distance from here to there depends on where
* the kernel ends up being put.
*/
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -854,11 +854,11 @@ instruction_access_slb_relon_pSeries:
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -966,7 +966,7 @@ system_call_entry:
b system_call_common
ppc64_runlatch_on_trampoline:
- b .__ppc64_runlatch_on
+ b __ppc64_runlatch_on
/*
* Here we have detected that the kernel stack pointer is bad.
@@ -1025,7 +1025,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
std r12,RESULT(r1)
std r11,STACK_FRAME_OVERHEAD-16(r1)
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
+ bl kernel_bad_stack
b 1b
/*
@@ -1046,7 +1046,7 @@ data_access_common:
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
li r5,0x300
- b .do_hash_page /* Try to handle as hpte fault */
+ b do_hash_page /* Try to handle as hpte fault */
.align 7
.globl h_data_storage_common
@@ -1056,11 +1056,11 @@ h_data_storage_common:
mfspr r10,SPRN_HDSISR
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
.align 7
.globl instruction_access_common
@@ -1071,9 +1071,9 @@ instruction_access_common:
ld r3,_NIP(r1)
andis. r4,r12,0x5820
li r5,0x400
- b .do_hash_page /* Try to handle as hpte fault */
+ b do_hash_page /* Try to handle as hpte fault */
- STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
/*
* Here is the common SLB miss user that is used when going to virtual
@@ -1088,7 +1088,7 @@ slb_miss_user_common:
stw r9,PACA_EXGEN+EX_CCR(r13)
std r10,PACA_EXGEN+EX_LR(r13)
std r11,PACA_EXGEN+EX_SRR0(r13)
- bl .slb_allocate_user
+ bl slb_allocate_user
ld r10,PACA_EXGEN+EX_LR(r13)
ld r3,PACA_EXGEN+EX_R3(r13)
@@ -1131,9 +1131,9 @@ slb_miss_fault:
unrecov_user_slb:
EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
DISABLE_INTS
- bl .save_nvgprs
+ bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b 1b
#endif /* __DISABLED__ */
@@ -1158,10 +1158,10 @@ machine_check_common:
lwz r4,PACA_EXGEN+EX_DSISR(r13)
std r3,_DAR(r1)
std r4,_DSISR(r1)
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_exception
- b .ret_from_except
+ bl machine_check_exception
+ b ret_from_except
.align 7
.globl alignment_common
@@ -1175,31 +1175,31 @@ alignment_common:
lwz r4,PACA_EXGEN+EX_DSISR(r13)
std r3,_DAR(r1)
std r4,_DSISR(r1)
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .alignment_exception
- b .ret_from_except
+ bl alignment_exception
+ b ret_from_except
.align 7
.globl program_check_common
program_check_common:
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .program_check_exception
- b .ret_from_except
+ bl program_check_exception
+ b ret_from_except
.align 7
.globl fp_unavailable_common
fp_unavailable_common:
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
bne 1f /* if from user, just load it up */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_fp_unavailable_exception
+ bl kernel_fp_unavailable_exception
BUG_OPCODE
1:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -1211,15 +1211,15 @@ BEGIN_FTR_SECTION
bne- 2f
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
- bl .load_up_fpu
+ bl load_up_fpu
b fast_exception_return
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .fp_unavailable_tm
- b .ret_from_except
+ bl fp_unavailable_tm
+ b ret_from_except
#endif
.align 7
.globl altivec_unavailable_common
@@ -1237,24 +1237,24 @@ BEGIN_FTR_SECTION
bne- 2f
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
#endif
- bl .load_up_altivec
+ bl load_up_altivec
b fast_exception_return
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .altivec_unavailable_tm
- b .ret_from_except
+ bl altivec_unavailable_tm
+ b ret_from_except
#endif
1:
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .altivec_unavailable_exception
- b .ret_from_except
+ bl altivec_unavailable_exception
+ b ret_from_except
.align 7
.globl vsx_unavailable_common
@@ -1272,26 +1272,26 @@ BEGIN_FTR_SECTION
bne- 2f
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
#endif
- b .load_up_vsx
+ b load_up_vsx
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .vsx_unavailable_tm
- b .ret_from_except
+ bl vsx_unavailable_tm
+ b ret_from_except
#endif
1:
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .vsx_unavailable_exception
- b .ret_from_except
+ bl vsx_unavailable_exception
+ b ret_from_except
- STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
- STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
+ STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception)
+ STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception)
.align 7
.globl __end_handlers
@@ -1386,9 +1386,9 @@ _GLOBAL(opal_mc_secondary_handler)
machine_check_handle_early:
std r0,GPR0(r1) /* Save r0 */
EXCEPTION_PROLOG_COMMON_3(0x200)
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_early
+ bl machine_check_early
ld r12,_MSR(r1)
#ifdef CONFIG_PPC_P7_NAP
/*
@@ -1408,11 +1408,11 @@ machine_check_handle_early:
/* Supervisor state loss */
li r0,1
stb r0,PACA_NAPSTATELOST(r13)
-3: bl .machine_check_queue_event
+3: bl machine_check_queue_event
MACHINE_CHECK_HANDLER_WINDUP
GET_PACA(r13)
ld r1,PACAR1(r13)
- b .power7_enter_nap_mode
+ b power7_enter_nap_mode
4:
#endif
/*
@@ -1444,7 +1444,7 @@ machine_check_handle_early:
andi. r11,r12,MSR_RI
bne 2f
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b 1b
2:
/*
@@ -1452,7 +1452,7 @@ machine_check_handle_early:
* Queue up the MCE event so that we can log it later, while
* returning from kernel or opal call.
*/
- bl .machine_check_queue_event
+ bl machine_check_queue_event
MACHINE_CHECK_HANDLER_WINDUP
rfid
9:
@@ -1468,7 +1468,7 @@ machine_check_handle_early:
* r3 is saved in paca->slb_r3
* We assume we aren't going to take any exceptions during this procedure.
*/
-_GLOBAL(slb_miss_realmode)
+slb_miss_realmode:
mflr r10
#ifdef CONFIG_RELOCATABLE
mtctr r11
@@ -1477,7 +1477,7 @@ _GLOBAL(slb_miss_realmode)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
- bl .slb_allocate_realmode
+ bl slb_allocate_realmode
/* All done -- return from exception. */
@@ -1517,9 +1517,9 @@ _GLOBAL(slb_miss_realmode)
unrecov_slb:
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
DISABLE_INTS
- bl .save_nvgprs
+ bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b 1b
@@ -1536,7 +1536,7 @@ power4_fixup_nap:
* Hash table stuff
*/
.align 7
-_STATIC(do_hash_page)
+do_hash_page:
std r3,_DAR(r1)
std r4,_DSISR(r1)
@@ -1573,7 +1573,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
*
* at return r3 = 0 for success, 1 for page fault, negative for error
*/
- bl .hash_page /* build HPTE if possible */
+ bl hash_page /* build HPTE if possible */
cmpdi r3,0 /* see if hash_page succeeded */
/* Success */
@@ -1587,35 +1587,35 @@ handle_page_fault:
11: ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_page_fault
+ bl do_page_fault
cmpdi r3,0
beq+ 12f
- bl .save_nvgprs
+ bl save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
lwz r4,_DAR(r1)
- bl .bad_page_fault
- b .ret_from_except
+ bl bad_page_fault
+ b ret_from_except
/* We have a data breakpoint exception - handle it */
handle_dabr_fault:
- bl .save_nvgprs
+ bl save_nvgprs
ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_break
-12: b .ret_from_except_lite
+ bl do_break
+12: b ret_from_except_lite
/* We have a page fault that hash_page could handle but HV refused
* the PTE insertion
*/
-13: bl .save_nvgprs
+13: bl save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
ld r4,_DAR(r1)
- bl .low_hash_fault
- b .ret_from_except
+ bl low_hash_fault
+ b ret_from_except
/*
* We come here as a result of a DSI at a point where we don't want
@@ -1624,16 +1624,16 @@ handle_dabr_fault:
* were soft-disabled. We want to invoke the exception handler for
* the access, or panic if there isn't a handler.
*/
-77: bl .save_nvgprs
+77: bl save_nvgprs
mr r4,r3
addi r3,r1,STACK_FRAME_OVERHEAD
li r5,SIGSEGV
- bl .bad_page_fault
- b .ret_from_except
+ bl bad_page_fault
+ b ret_from_except
/* here we have a segment miss */
do_ste_alloc:
- bl .ste_allocate /* try to insert stab entry */
+ bl ste_allocate /* try to insert stab entry */
cmpdi r3,0
bne- handle_page_fault
b fast_exception_return
@@ -1646,7 +1646,7 @@ do_ste_alloc:
* We assume (DAR >> 60) == 0xc.
*/
.align 7
-_GLOBAL(do_stab_bolted)
+do_stab_bolted:
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
mfspr r11,SPRN_DAR /* ea */
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 7213d930918d736b834e5eccb45b66b4fce630c1..742694c1d85238fe380e4ceecd7443506bb8d0b7 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -69,7 +69,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
*/
token = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL);
if (!token)
- return 0;
+ return 1;
fw_dump.fadump_supported = 1;
fw_dump.ibm_configure_kernel_dump = *token;
@@ -92,7 +92,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
&size);
if (!sections)
- return 0;
+ return 1;
num_sections = size / (3 * sizeof(u32));
@@ -110,6 +110,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
break;
}
}
+
return 1;
}
@@ -645,7 +646,7 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
}
/* Lower 4 bytes of reg_value contains logical cpu id */
cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
- if (!cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
+ if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
SKIP_TO_NEXT_CPU(reg_entry);
continue;
}
@@ -662,9 +663,11 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
}
fadump_final_note(note_buf);
- pr_debug("Updating elfcore header (%llx) with cpu notes\n",
+ if (fdh) {
+ pr_debug("Updating elfcore header (%llx) with cpu notes\n",
fdh->elfcorehdr_addr);
- fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr));
+ fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr));
+ }
return 0;
error_out:
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 6a014c763cc71da4a9a5fd523649f105bf5fdc10..f202d0731b065466ba8151df98b11cd6a3cd720c 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -105,11 +105,9 @@ __ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int op;
- unsigned int jmp[5];
unsigned long ptr;
unsigned long ip = rec->ip;
- unsigned long tramp;
- int offset;
+ void *tramp;
/* read where this goes */
if (probe_kernel_read(&op, (void *)ip, sizeof(int)))
@@ -122,96 +120,41 @@ __ftrace_make_nop(struct module *mod,
}
/* lets find where the pointer goes */
- tramp = find_bl_target(ip, op);
-
- /*
- * On PPC64 the trampoline looks like:
- * 0x3d, 0x82, 0x00, 0x00, addis r12,r2, <high>
- * 0x39, 0x8c, 0x00, 0x00, addi r12,r12, <low>
- * Where the bytes 2,3,6 and 7 make up the 32bit offset
- * to the TOC that holds the pointer.
- * to jump to.
- * 0xf8, 0x41, 0x00, 0x28, std r2,40(r1)
- * 0xe9, 0x6c, 0x00, 0x20, ld r11,32(r12)
- * The actually address is 32 bytes from the offset
- * into the TOC.
- * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12)
- */
-
- pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
-
- /* Find where the trampoline jumps to */
- if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
- printk(KERN_ERR "Failed to read %lx\n", tramp);
- return -EFAULT;
- }
+ tramp = (void *)find_bl_target(ip, op);
- pr_devel(" %08x %08x", jmp[0], jmp[1]);
+ pr_devel("ip:%lx jumps to %p", ip, tramp);
- /* verify that this is what we expect it to be */
- if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
- ((jmp[1] & 0xffff0000) != 0x398c0000) ||
- (jmp[2] != 0xf8410028) ||
- (jmp[3] != 0xe96c0020) ||
- (jmp[4] != 0xe84c0028)) {
+ if (!is_module_trampoline(tramp)) {
printk(KERN_ERR "Not a trampoline\n");
return -EINVAL;
}
- /* The bottom half is signed extended */
- offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
- (int)((short)jmp[1]);
-
- pr_devel(" %x ", offset);
-
- /* get the address this jumps too */
- tramp = mod->arch.toc + offset + 32;
- pr_devel("toc: %lx", tramp);
-
- if (probe_kernel_read(jmp, (void *)tramp, 8)) {
- printk(KERN_ERR "Failed to read %lx\n", tramp);
+ if (module_trampoline_target(mod, tramp, &ptr)) {
+ printk(KERN_ERR "Failed to get trampoline target\n");
return -EFAULT;
}
- pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
-
-#ifdef __LITTLE_ENDIAN__
- ptr = ((unsigned long)jmp[1] << 32) + jmp[0];
-#else
- ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
-#endif
+ pr_devel("trampoline target %lx", ptr);
/* This should match what was called */
if (ptr != ppc_function_entry((void *)addr)) {
- printk(KERN_ERR "addr does not match %lx\n", ptr);
+ printk(KERN_ERR "addr %lx does not match expected %lx\n",
+ ptr, ppc_function_entry((void *)addr));
return -EINVAL;
}
/*
- * We want to nop the line, but the next line is
- * 0xe8, 0x41, 0x00, 0x28 ld r2,40(r1)
- * This needs to be turned to a nop too.
- */
- if (probe_kernel_read(&op, (void *)(ip+4), MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- if (op != 0xe8410028) {
- printk(KERN_ERR "Next line is not ld! (%08x)\n", op);
- return -EINVAL;
- }
-
- /*
- * Milton Miller pointed out that we can not blindly do nops.
- * If a task was preempted when calling a trace function,
- * the nops will remove the way to restore the TOC in r2
- * and the r2 TOC will get corrupted.
- */
-
- /*
- * Replace:
- * bl <tramp> <==== will be replaced with "b 1f"
- * ld r2,40(r1)
- * 1:
+ * Our original call site looks like:
+ *
+ * bl <tramp>
+ * ld r2,XX(r1)
+ *
+ * Milton Miller pointed out that we can not simply nop the branch.
+ * If a task was preempted when calling a trace function, the nops
+ * will remove the way to restore the TOC in r2 and the r2 TOC will
+ * get corrupted.
+ *
+ * Use a b +8 to jump over the load.
*/
op = 0x48000008; /* b +8 */
@@ -349,19 +292,24 @@ static int
__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int op[2];
- unsigned long ip = rec->ip;
+ void *ip = (void *)rec->ip;
/* read where this goes */
- if (probe_kernel_read(op, (void *)ip, MCOUNT_INSN_SIZE * 2))
+ if (probe_kernel_read(op, ip, sizeof(op)))
return -EFAULT;
/*
- * It should be pointing to two nops or
- * b +8; ld r2,40(r1)
+ * We expect to see:
+ *
+ * b +8
+ * ld r2,XX(r1)
+ *
+ * The load offset is different depending on the ABI. For simplicity
+ * just mask it out when doing the compare.
*/
- if (((op[0] != 0x48000008) || (op[1] != 0xe8410028)) &&
- ((op[0] != PPC_INST_NOP) || (op[1] != PPC_INST_NOP))) {
- printk(KERN_ERR "Expected NOPs but have %x %x\n", op[0], op[1]);
+ if ((op[0] != 0x48000008) || ((op[1] & 0xffff00000) != 0xe8410000)) {
+ printk(KERN_ERR "Unexpected call sequence: %x %x\n",
+ op[0], op[1]);
return -EINVAL;
}
@@ -371,23 +319,16 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
return -EINVAL;
}
- /* create the branch to the trampoline */
- op[0] = create_branch((unsigned int *)ip,
- rec->arch.mod->arch.tramp, BRANCH_SET_LINK);
- if (!op[0]) {
- printk(KERN_ERR "REL24 out of range!\n");
+ /* Ensure branch is within 24 bits */
+ if (create_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
+ printk(KERN_ERR "Branch out of range");
return -EINVAL;
}
- /* ld r2,40(r1) */
- op[1] = 0xe8410028;
-
- pr_devel("write to %lx\n", rec->ip);
-
- if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
- return -EPERM;
-
- flush_icache_range(ip, ip + 8);
+ if (patch_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
+ printk(KERN_ERR "REL24 out of range!\n");
+ return -EINVAL;
+ }
return 0;
}
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b7363bd42452848169e3fa5bc58721c1aeb3b08a..a95145d7f61bffa1736a183efc78c1596e32bb4c 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -70,16 +70,15 @@ _GLOBAL(__start)
/* NOP this out unconditionally */
BEGIN_FTR_SECTION
FIXUP_ENDIAN
- b .__start_initialization_multiplatform
+ b __start_initialization_multiplatform
END_FTR_SECTION(0, 1)
/* Catch branch to 0 in real mode */
trap
- /* Secondary processors spin on this value until it becomes nonzero.
- * When it does it contains the real address of the descriptor
- * of the function that the cpu should jump to to continue
- * initialization.
+ /* Secondary processors spin on this value until it becomes non-zero.
+ * When non-zero, it contains the real address of the function the cpu
+ * should jump to.
*/
.balign 8
.globl __secondary_hold_spinloop
@@ -140,16 +139,15 @@ __secondary_hold:
tovirt(r26,r26)
#endif
/* All secondary cpus wait here until told to start. */
-100: ld r4,__secondary_hold_spinloop-_stext(r26)
- cmpdi 0,r4,0
+100: ld r12,__secondary_hold_spinloop-_stext(r26)
+ cmpdi 0,r12,0
beq 100b
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
#ifdef CONFIG_PPC_BOOK3E
- tovirt(r4,r4)
+ tovirt(r12,r12)
#endif
- ld r4,0(r4) /* deref function descriptor */
- mtctr r4
+ mtctr r12
mr r3,r24
/*
* it may be the case that other platforms have r4 right to
@@ -186,16 +184,16 @@ _GLOBAL(generic_secondary_thread_init)
mr r24,r3
/* turn on 64-bit mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
/* get a valid TOC pointer, wherever we're mapped at */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
#ifdef CONFIG_PPC_BOOK3E
/* Book3E initialization */
mr r3,r24
- bl .book3e_secondary_thread_init
+ bl book3e_secondary_thread_init
#endif
b generic_secondary_common_init
@@ -214,17 +212,17 @@ _GLOBAL(generic_secondary_smp_init)
mr r25,r4
/* turn on 64-bit mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
/* get a valid TOC pointer, wherever we're mapped at */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
#ifdef CONFIG_PPC_BOOK3E
/* Book3E initialization */
mr r3,r24
mr r4,r25
- bl .book3e_secondary_core_init
+ bl book3e_secondary_core_init
#endif
generic_secondary_common_init:
@@ -236,7 +234,7 @@ generic_secondary_common_init:
ld r13,0(r13) /* Get base vaddr of paca array */
#ifndef CONFIG_SMP
addi r13,r13,PACA_SIZE /* know r13 if used accidentally */
- b .kexec_wait /* wait for next kernel if !SMP */
+ b kexec_wait /* wait for next kernel if !SMP */
#else
LOAD_REG_ADDR(r7, nr_cpu_ids) /* Load nr_cpu_ids address */
lwz r7,0(r7) /* also the max paca allocated */
@@ -250,7 +248,7 @@ generic_secondary_common_init:
blt 1b
mr r3,r24 /* not found, copy phys to r3 */
- b .kexec_wait /* next kernel might do better */
+ b kexec_wait /* next kernel might do better */
2: SET_PACA(r13)
#ifdef CONFIG_PPC_BOOK3E
@@ -264,11 +262,13 @@ generic_secondary_common_init:
/* See if we need to call a cpu state restore handler */
LOAD_REG_ADDR(r23, cur_cpu_spec)
ld r23,0(r23)
- ld r23,CPU_SPEC_RESTORE(r23)
- cmpdi 0,r23,0
+ ld r12,CPU_SPEC_RESTORE(r23)
+ cmpdi 0,r12,0
beq 3f
- ld r23,0(r23)
- mtctr r23
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ ld r12,0(r12)
+#endif
+ mtctr r12
bctrl
3: LOAD_REG_ADDR(r3, spinning_secondaries) /* Decrement spinning_secondaries */
@@ -299,7 +299,7 @@ generic_secondary_common_init:
* Assumes we're mapped EA == RA if the MMU is on.
*/
#ifdef CONFIG_PPC_BOOK3S
-_STATIC(__mmu_off)
+__mmu_off:
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
beqlr
@@ -324,12 +324,12 @@ _STATIC(__mmu_off)
* DT block, r4 is a physical pointer to the kernel itself
*
*/
-_GLOBAL(__start_initialization_multiplatform)
+__start_initialization_multiplatform:
/* Make sure we are running in 64 bits mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
/* Get TOC pointer (current runtime address) */
- bl .relative_toc
+ bl relative_toc
/* find out where we are now */
bcl 20,31,$+4
@@ -342,7 +342,7 @@ _GLOBAL(__start_initialization_multiplatform)
*/
cmpldi cr0,r5,0
beq 1f
- b .__boot_from_prom /* yes -> prom */
+ b __boot_from_prom /* yes -> prom */
1:
/* Save parameters */
mr r31,r3
@@ -354,8 +354,8 @@ _GLOBAL(__start_initialization_multiplatform)
#endif
#ifdef CONFIG_PPC_BOOK3E
- bl .start_initialization_book3e
- b .__after_prom_start
+ bl start_initialization_book3e
+ b __after_prom_start
#else
/* Setup some critical 970 SPRs before switching MMU off */
mfspr r0,SPRN_PVR
@@ -368,15 +368,15 @@ _GLOBAL(__start_initialization_multiplatform)
beq 1f
cmpwi r0,0x45 /* 970GX */
bne 2f
-1: bl .__cpu_preinit_ppc970
+1: bl __cpu_preinit_ppc970
2:
/* Switch off MMU if not already off */
- bl .__mmu_off
- b .__after_prom_start
+ bl __mmu_off
+ b __after_prom_start
#endif /* CONFIG_PPC_BOOK3E */
-_INIT_STATIC(__boot_from_prom)
+__boot_from_prom:
#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
/* Save parameters */
mr r31,r3
@@ -395,7 +395,7 @@ _INIT_STATIC(__boot_from_prom)
#ifdef CONFIG_RELOCATABLE
/* Relocate code for where we are now */
mr r3,r26
- bl .relocate
+ bl relocate
#endif
/* Restore parameters */
@@ -407,14 +407,14 @@ _INIT_STATIC(__boot_from_prom)
/* Do all of the interaction with OF client interface */
mr r8,r26
- bl .prom_init
+ bl prom_init
#endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */
/* We never return. We also hit that trap if trying to boot
* from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
trap
-_STATIC(__after_prom_start)
+__after_prom_start:
#ifdef CONFIG_RELOCATABLE
/* process relocations for the final address of the kernel */
lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
@@ -424,7 +424,7 @@ _STATIC(__after_prom_start)
bne 1f
add r25,r25,r26
1: mr r3,r25
- bl .relocate
+ bl relocate
#endif
/*
@@ -464,12 +464,12 @@ _STATIC(__after_prom_start)
lis r5,(copy_to_here - _stext)@ha
addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
- bl .copy_and_flush /* copy the first n bytes */
+ bl copy_and_flush /* copy the first n bytes */
/* this includes the code being */
/* executed here. */
addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */
- addi r8,r8,(4f - _stext)@l /* that we just made */
- mtctr r8
+ addi r12,r8,(4f - _stext)@l /* that we just made */
+ mtctr r12
bctr
.balign 8
@@ -478,9 +478,9 @@ p_end: .llong _end - _stext
4: /* Now copy the rest of the kernel up to _end */
addis r5,r26,(p_end - _stext)@ha
ld r5,(p_end - _stext)@l(r5) /* get _end */
-5: bl .copy_and_flush /* copy the rest */
+5: bl copy_and_flush /* copy the rest */
-9: b .start_here_multiplatform
+9: b start_here_multiplatform
/*
* Copy routine used to copy the kernel to start at physical address 0
@@ -544,7 +544,7 @@ __secondary_start_pmac_0:
_GLOBAL(pmac_secondary_start)
/* turn on 64-bit mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
li r0,0
mfspr r3,SPRN_HID4
@@ -556,11 +556,11 @@ _GLOBAL(pmac_secondary_start)
slbia
/* get TOC pointer (real address) */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
/* Copy some CPU settings from CPU 0 */
- bl .__restore_cpu_ppc970
+ bl __restore_cpu_ppc970
/* pSeries do that early though I don't think we really need it */
mfmsr r3
@@ -619,7 +619,7 @@ __secondary_start:
std r14,PACAKSAVE(r13)
/* Do early setup for that CPU (stab, slb, hash table pointer) */
- bl .early_setup_secondary
+ bl early_setup_secondary
/*
* setup the new stack pointer, but *don't* use this until
@@ -639,7 +639,7 @@ __secondary_start:
stb r0,PACAIRQHAPPENED(r13)
/* enable MMU and jump to start_secondary */
- LOAD_REG_ADDR(r3, .start_secondary_prolog)
+ LOAD_REG_ADDR(r3, start_secondary_prolog)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
mtspr SPRN_SRR0,r3
@@ -652,11 +652,11 @@ __secondary_start:
* zero the stack back-chain pointer and get the TOC virtual address
* before going into C code.
*/
-_GLOBAL(start_secondary_prolog)
+start_secondary_prolog:
ld r2,PACATOC(r13)
li r3,0
std r3,0(r1) /* Zero the stack frame pointer */
- bl .start_secondary
+ bl start_secondary
b .
/*
* Reset stack pointer and call start_secondary
@@ -667,14 +667,14 @@ _GLOBAL(start_secondary_resume)
ld r1,PACAKSAVE(r13) /* Reload kernel stack pointer */
li r3,0
std r3,0(r1) /* Zero the stack frame pointer */
- bl .start_secondary
+ bl start_secondary
b .
#endif
/*
* This subroutine clobbers r11 and r12
*/
-_GLOBAL(enable_64b_mode)
+enable_64b_mode:
mfmsr r11 /* grab the current MSR */
#ifdef CONFIG_PPC_BOOK3E
oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */
@@ -715,9 +715,9 @@ p_toc: .llong __toc_start + 0x8000 - 0b
/*
* This is where the main kernel code starts.
*/
-_INIT_STATIC(start_here_multiplatform)
+start_here_multiplatform:
/* set up the TOC */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
/* Clear out the BSS. It may have been done in prom_init,
@@ -776,9 +776,9 @@ _INIT_STATIC(start_here_multiplatform)
/* Restore parameters passed from prom_init/kexec */
mr r3,r31
- bl .early_setup /* also sets r13 and SPRG_PACA */
+ bl early_setup /* also sets r13 and SPRG_PACA */
- LOAD_REG_ADDR(r3, .start_here_common)
+ LOAD_REG_ADDR(r3, start_here_common)
ld r4,PACAKMSR(r13)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
@@ -786,7 +786,8 @@ _INIT_STATIC(start_here_multiplatform)
b . /* prevent speculative execution */
/* This is where all platforms converge execution */
-_INIT_GLOBAL(start_here_common)
+
+start_here_common:
/* relocation is on at this point */
std r1,PACAKSAVE(r13)
@@ -794,7 +795,7 @@ _INIT_GLOBAL(start_here_common)
ld r2,PACATOC(r13)
/* Do more system initializations in virtual mode */
- bl .setup_system
+ bl setup_system
/* Mark interrupts soft and hard disabled (they might be enabled
* in the PACA when doing hotplug)
@@ -805,7 +806,7 @@ _INIT_GLOBAL(start_here_common)
stb r0,PACAIRQHAPPENED(r13)
/* Generic kernel entry */
- bl .start_kernel
+ bl start_kernel
/* Not reached */
BUG_OPCODE
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index b0a1792279bbf38e1726a86b6d8cd504c11e15ca..0bb5918faaaf2c008f9e3ae25a7ae3d1c7ad4f21 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -72,7 +72,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
* If so, DABR will be populated in single_step_dabr_instruction().
*/
if (current->thread.last_hit_ubp != bp)
- set_breakpoint(info);
+ __set_breakpoint(info);
return 0;
}
@@ -198,7 +198,7 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
info = counter_arch_bp(tsk->thread.last_hit_ubp);
regs->msr &= ~MSR_SE;
- set_breakpoint(info);
+ __set_breakpoint(info);
tsk->thread.last_hit_ubp = NULL;
}
@@ -284,7 +284,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args)
if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ))
perf_bp_event(bp, regs);
- set_breakpoint(info);
+ __set_breakpoint(info);
out:
rcu_read_unlock();
return rc;
@@ -316,7 +316,7 @@ int __kprobes single_step_dabr_instruction(struct die_args *args)
if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ))
perf_bp_event(bp, regs);
- set_breakpoint(info);
+ __set_breakpoint(info);
current->thread.last_hit_ubp = NULL;
/*
diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
index bfb73cc209ceb3885f60a2ba873fb271940f414d..48c21acef915883aa08205e2d9388cef67f91b99 100644
--- a/arch/powerpc/kernel/idle_book3e.S
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -43,7 +43,7 @@ _GLOBAL(\name)
*/
#ifdef CONFIG_TRACE_IRQFLAGS
stdu r1,-128(r1)
- bl .trace_hardirqs_on
+ bl trace_hardirqs_on
addi r1,r1,128
#endif
li r0,1
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index e3edaa189911b8232d2c0682b52dedd982f88ae0..f57a19348bddb4ec7f7bbf0f2bb2ff50aa292c97 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -46,7 +46,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
mflr r0
std r0,16(r1)
stdu r1,-128(r1)
- bl .trace_hardirqs_on
+ bl trace_hardirqs_on
addi r1,r1,128
ld r0,16(r1)
mtlr r0
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index c3ab86975614a4a9d4af842962fa66f32c5c8e47..2480256272d4b5c84cd9654b48498f9d1bd9d519 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -39,6 +39,10 @@
* Pass requested state in r3:
* 0 - nap
* 1 - sleep
+ *
+ * To check IRQ_HAPPENED in r4
+ * 0 - don't check
+ * 1 - check
*/
_GLOBAL(power7_powersave_common)
/* Use r3 to pass state nap/sleep/winkle */
@@ -58,7 +62,7 @@ _GLOBAL(power7_powersave_common)
/* Make sure FPU, VSX etc... are flushed as we may lose
* state when going to nap mode
*/
- bl .discard_lazy_cpu_state
+ bl discard_lazy_cpu_state
#endif /* CONFIG_SMP */
/* Hard disable interrupts */
@@ -71,6 +75,8 @@ _GLOBAL(power7_powersave_common)
lbz r0,PACAIRQHAPPENED(r13)
cmpwi cr0,r0,0
beq 1f
+ cmpwi cr0,r4,0
+ beq 1f
addi r1,r1,INT_FRAME_SIZE
ld r0,16(r1)
mtlr r0
@@ -114,15 +120,18 @@ _GLOBAL(power7_idle)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
+ li r3, 1
/* fall through */
_GLOBAL(power7_nap)
+ mr r4,r3
li r3,0
b power7_powersave_common
/* No return */
_GLOBAL(power7_sleep)
li r3,1
+ li r4,0
b power7_powersave_common
/* No return */
@@ -168,7 +177,7 @@ _GLOBAL(power7_wakeup_loss)
_GLOBAL(power7_wakeup_noloss)
lbz r0,PACA_NAPSTATELOST(r13)
cmpwi r0,0
- bne .power7_wakeup_loss
+ bne power7_wakeup_loss
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 40bd7bd4e19a88ee9b573c37deea8bc8694375b9..936258881c98ccaee684998a3d05b2485c7fce0c 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -48,6 +48,9 @@ static struct of_device_id legacy_serial_parents[] __initdata = {
static unsigned int legacy_serial_count;
static int legacy_serial_console = -1;
+static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_SHARE_IRQ | UPF_FIXED_PORT;
+
static unsigned int tsi_serial_in(struct uart_port *p, int offset)
{
unsigned int tmp;
@@ -71,8 +74,9 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
phys_addr_t taddr, unsigned long irq,
upf_t flags, int irq_check_parent)
{
- const __be32 *clk, *spd;
+ const __be32 *clk, *spd, *rs;
u32 clock = BASE_BAUD * 16;
+ u32 shift = 0;
int index;
/* get clock freq. if present */
@@ -83,6 +87,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
/* get default speed if present */
spd = of_get_property(np, "current-speed", NULL);
+ /* get register shift if present */
+ rs = of_get_property(np, "reg-shift", NULL);
+ if (rs && *rs)
+ shift = be32_to_cpup(rs);
+
/* If we have a location index, then try to use it */
if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
index = want_index;
@@ -126,6 +135,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
legacy_serial_ports[index].uartclk = clock;
legacy_serial_ports[index].irq = irq;
legacy_serial_ports[index].flags = flags;
+ legacy_serial_ports[index].regshift = shift;
legacy_serial_infos[index].taddr = taddr;
legacy_serial_infos[index].np = of_node_get(np);
legacy_serial_infos[index].clock = clock;
@@ -153,8 +163,6 @@ static int __init add_legacy_soc_port(struct device_node *np,
{
u64 addr;
const __be32 *addrp;
- upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
- | UPF_FIXED_PORT;
struct device_node *tsi = of_get_parent(np);
/* We only support ports that have a clock frequency properly
@@ -163,9 +171,8 @@ static int __init add_legacy_soc_port(struct device_node *np,
if (of_get_property(np, "clock-frequency", NULL) == NULL)
return -1;
- /* if reg-shift or offset, don't try to use it */
- if ((of_get_property(np, "reg-shift", NULL) != NULL) ||
- (of_get_property(np, "reg-offset", NULL) != NULL))
+ /* if reg-offset don't try to use it */
+ if ((of_get_property(np, "reg-offset", NULL) != NULL))
return -1;
/* if rtas uses this device, don't try to use it as well */
@@ -185,9 +192,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
* IO port value. It will be fixed up later along with the irq
*/
if (tsi && !strcmp(tsi->type, "tsi-bridge"))
- return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+ return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
+ NO_IRQ, legacy_port_flags, 0);
else
- return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
+ NO_IRQ, legacy_port_flags, 0);
}
static int __init add_legacy_isa_port(struct device_node *np,
@@ -233,7 +242,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
/* Add port, irq will be dealt with later */
return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
- taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0);
+ taddr, NO_IRQ, legacy_port_flags, 0);
}
@@ -306,7 +315,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
* IO port value. It will be fixed up later along with the irq
*/
return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
- UPF_BOOT_AUTOCONF, np != pci_dev);
+ legacy_port_flags, np != pci_dev);
}
#endif
@@ -315,17 +324,20 @@ static void __init setup_legacy_serial_console(int console)
struct legacy_serial_info *info = &legacy_serial_infos[console];
struct plat_serial8250_port *port = &legacy_serial_ports[console];
void __iomem *addr;
+ unsigned int stride;
+
+ stride = 1 << port->regshift;
/* Check if a translated MMIO address has been found */
if (info->taddr) {
addr = ioremap(info->taddr, 0x1000);
if (addr == NULL)
return;
- udbg_uart_init_mmio(addr, 1);
+ udbg_uart_init_mmio(addr, stride);
} else {
/* Check if it's PIO and we support untranslated PIO */
if (port->iotype == UPIO_PORT && isa_io_special)
- udbg_uart_init_pio(port->iobase, 1);
+ udbg_uart_init_pio(port->iobase, stride);
else
return;
}
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 3d0249599d524af2a8883cacc4df5d44716273b8..4e314b90c75d699edda82589c8a5a983bcc5dc6e 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -34,7 +34,7 @@ _GLOBAL(call_do_softirq)
std r0,16(r1)
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
mr r1,r3
- bl .__do_softirq
+ bl __do_softirq
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
@@ -45,7 +45,7 @@ _GLOBAL(call_do_irq)
std r0,16(r1)
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
mr r1,r4
- bl .__do_irq
+ bl __do_irq
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
@@ -506,7 +506,7 @@ _GLOBAL(kexec_smp_wait)
stb r4,PACAKEXECSTATE(r13)
SYNC
- b .kexec_wait
+ b kexec_wait
/*
* switch to real mode (turn mmu off)
@@ -576,7 +576,7 @@ _GLOBAL(kexec_sequence)
/* copy dest pages, flush whole dest image */
mr r3,r29
- bl .kexec_copy_flush /* (image) */
+ bl kexec_copy_flush /* (image) */
/* turn off mmu */
bl real_mode
@@ -586,7 +586,7 @@ _GLOBAL(kexec_sequence)
mr r4,r30 /* start, aka phys mem offset */
li r5,0x100
li r6,0
- bl .copy_and_flush /* (dest, src, copy limit, start offset) */
+ bl copy_and_flush /* (dest, src, copy limit, start offset) */
1: /* assume normal blr return */
/* release other cpus to the new kernel secondary start at 0x60 */
@@ -595,8 +595,12 @@ _GLOBAL(kexec_sequence)
stw r6,kexec_flag-1b(5)
/* clear out hardware hash page table and tlb */
- ld r5,0(r27) /* deref function descriptor */
- mtctr r5
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ ld r12,0(r27) /* deref function descriptor */
+#else
+ mr r12,r27
+#endif
+ mtctr r12
bctrl /* ppc_md.hpte_clear_all(void); */
/*
@@ -630,3 +634,31 @@ _GLOBAL(kexec_sequence)
li r5,0
blr /* image->start(physid, image->start, 0); */
#endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_MODULES
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+
+#ifdef CONFIG_MODVERSIONS
+.weak __crc_TOC.
+.section "___kcrctab+TOC.","a"
+.globl __kcrctab_TOC.
+__kcrctab_TOC.:
+ .llong __crc_TOC.
+#endif
+
+/*
+ * Export a fake .TOC. since both modpost and depmod will complain otherwise.
+ * Both modpost and depmod strip the leading . so we do the same here.
+ */
+.section "__ksymtab_strings","a"
+__kstrtab_TOC.:
+ .asciz "TOC."
+
+.section "___ksymtab+TOC.","a"
+/* This symbol name is important: it's used by modpost to find exported syms */
+.globl __ksymtab_TOC.
+__ksymtab_TOC.:
+ .llong 0 /* .value */
+ .llong __kstrtab_TOC.
+#endif /* ELFv2 */
+#endif /* MODULES */
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 12664c130d73dd2d62fac4300f033de1a5242b7c..077d2ce6c5a7c64b2a51404e7e33fbb5004541b9 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -22,6 +22,7 @@
#include <linux/vmalloc.h>
#include <linux/ftrace.h>
#include <linux/bug.h>
+#include <linux/uaccess.h>
#include <asm/module.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
@@ -41,46 +42,170 @@
#define DEBUGP(fmt , ...)
#endif
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define R2_STACK_OFFSET 24
+
+/* An address is simply the address of the function. */
+typedef unsigned long func_desc_t;
+
+static func_desc_t func_desc(unsigned long addr)
+{
+ return addr;
+}
+static unsigned long func_addr(unsigned long addr)
+{
+ return addr;
+}
+static unsigned long stub_func_addr(func_desc_t func)
+{
+ return func;
+}
+
+/* PowerPC64 specific values for the Elf64_Sym st_other field. */
+#define STO_PPC64_LOCAL_BIT 5
+#define STO_PPC64_LOCAL_MASK (7 << STO_PPC64_LOCAL_BIT)
+#define PPC64_LOCAL_ENTRY_OFFSET(other) \
+ (((1 << (((other) & STO_PPC64_LOCAL_MASK) >> STO_PPC64_LOCAL_BIT)) >> 2) << 2)
+
+static unsigned int local_entry_offset(const Elf64_Sym *sym)
+{
+ /* sym->st_other indicates offset to local entry point
+ * (otherwise it will assume r12 is the address of the start
+ * of function and try to derive r2 from it). */
+ return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other);
+}
+#else
+#define R2_STACK_OFFSET 40
+
+/* An address is address of the OPD entry, which contains address of fn. */
+typedef struct ppc64_opd_entry func_desc_t;
+
+static func_desc_t func_desc(unsigned long addr)
+{
+ return *(struct ppc64_opd_entry *)addr;
+}
+static unsigned long func_addr(unsigned long addr)
+{
+ return func_desc(addr).funcaddr;
+}
+static unsigned long stub_func_addr(func_desc_t func)
+{
+ return func.funcaddr;
+}
+static unsigned int local_entry_offset(const Elf64_Sym *sym)
+{
+ return 0;
+}
+#endif
+
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
the kernel itself). But on PPC64, these need to be used for every
jump, actually, to reset r2 (TOC+0x8000). */
struct ppc64_stub_entry
{
- /* 28 byte jump instruction sequence (7 instructions) */
- unsigned char jump[28];
- unsigned char unused[4];
+ /* 28 byte jump instruction sequence (7 instructions). We only
+ * need 6 instructions on ABIv2 but we always allocate 7 so
+ * so we don't have to modify the trampoline load instruction. */
+ u32 jump[7];
+ u32 unused;
/* Data for the above code */
- struct ppc64_opd_entry opd;
+ func_desc_t funcdata;
};
-/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external)
- function which may be more than 24-bits away. We could simply
- patch the new r2 value and function pointer into the stub, but it's
- significantly shorter to put these values at the end of the stub
- code, and patch the stub address (32-bits relative to the TOC ptr,
- r2) into the stub. */
-static struct ppc64_stub_entry ppc64_stub =
-{ .jump = {
-#ifdef __LITTLE_ENDIAN__
- 0x00, 0x00, 0x82, 0x3d, /* addis r12,r2, <high> */
- 0x00, 0x00, 0x8c, 0x39, /* addi r12,r12, <low> */
- /* Save current r2 value in magic place on the stack. */
- 0x28, 0x00, 0x41, 0xf8, /* std r2,40(r1) */
- 0x20, 0x00, 0x6c, 0xe9, /* ld r11,32(r12) */
- 0x28, 0x00, 0x4c, 0xe8, /* ld r2,40(r12) */
- 0xa6, 0x03, 0x69, 0x7d, /* mtctr r11 */
- 0x20, 0x04, 0x80, 0x4e /* bctr */
-#else
- 0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, <high> */
- 0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, <low> */
+/*
+ * PPC64 uses 24 bit jumps, but we need to jump into other modules or
+ * the kernel which may be further. So we jump to a stub.
+ *
+ * For ELFv1 we need to use this to set up the new r2 value (aka TOC
+ * pointer). For ELFv2 it's the callee's responsibility to set up the
+ * new r2, but for both we need to save the old r2.
+ *
+ * We could simply patch the new r2 value and function pointer into
+ * the stub, but it's significantly shorter to put these values at the
+ * end of the stub code, and patch the stub address (32-bits relative
+ * to the TOC ptr, r2) into the stub.
+ */
+
+static u32 ppc64_stub_insns[] = {
+ 0x3d620000, /* addis r11,r2, <high> */
+ 0x396b0000, /* addi r11,r11, <low> */
/* Save current r2 value in magic place on the stack. */
- 0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */
- 0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */
- 0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */
- 0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */
- 0x4e, 0x80, 0x04, 0x20 /* bctr */
+ 0xf8410000|R2_STACK_OFFSET, /* std r2,R2_STACK_OFFSET(r1) */
+ 0xe98b0020, /* ld r12,32(r11) */
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ /* Set up new r2 from function descriptor */
+ 0xe84b0028, /* ld r2,40(r11) */
+#endif
+ 0x7d8903a6, /* mtctr r12 */
+ 0x4e800420 /* bctr */
+};
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+static u32 ppc64_stub_mask[] = {
+ 0xffff0000,
+ 0xffff0000,
+ 0xffffffff,
+ 0xffffffff,
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ 0xffffffff,
+#endif
+ 0xffffffff,
+ 0xffffffff
+};
+
+bool is_module_trampoline(u32 *p)
+{
+ unsigned int i;
+ u32 insns[ARRAY_SIZE(ppc64_stub_insns)];
+
+ BUILD_BUG_ON(sizeof(ppc64_stub_insns) != sizeof(ppc64_stub_mask));
+
+ if (probe_kernel_read(insns, p, sizeof(insns)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(ppc64_stub_insns); i++) {
+ u32 insna = insns[i];
+ u32 insnb = ppc64_stub_insns[i];
+ u32 mask = ppc64_stub_mask[i];
+
+ if ((insna & mask) != (insnb & mask))
+ return false;
+ }
+
+ return true;
+}
+
+int module_trampoline_target(struct module *mod, u32 *trampoline,
+ unsigned long *target)
+{
+ u32 buf[2];
+ u16 upper, lower;
+ long offset;
+ void *toc_entry;
+
+ if (probe_kernel_read(buf, trampoline, sizeof(buf)))
+ return -EFAULT;
+
+ upper = buf[0] & 0xffff;
+ lower = buf[1] & 0xffff;
+
+ /* perform the addis/addi, both signed */
+ offset = ((short)upper << 16) + (short)lower;
+
+ /*
+ * Now get the address this trampoline jumps to. This
+ * is always 32 bytes into our trampoline stub.
+ */
+ toc_entry = (void *)mod->arch.toc + offset + 32;
+
+ if (probe_kernel_read(target, toc_entry, sizeof(*target)))
+ return -EFAULT;
+
+ return 0;
+}
+
#endif
-} };
/* Count how many different 24-bit relocations (different symbol,
different addend) */
@@ -183,6 +308,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
return relocs * sizeof(struct ppc64_stub_entry);
}
+/* Still needed for ELFv2, for .TOC. */
static void dedotify_versions(struct modversion_info *vers,
unsigned long size)
{
@@ -193,7 +319,7 @@ static void dedotify_versions(struct modversion_info *vers,
memmove(vers->name, vers->name+1, strlen(vers->name));
}
-/* Undefined symbols which refer to .funcname, hack to funcname */
+/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */
static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
{
unsigned int i;
@@ -207,6 +333,24 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
}
}
+static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex)
+{
+ unsigned int i, numsyms;
+ Elf64_Sym *syms;
+
+ syms = (Elf64_Sym *)sechdrs[symindex].sh_addr;
+ numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
+
+ for (i = 1; i < numsyms; i++) {
+ if (syms[i].st_shndx == SHN_UNDEF
+ && strcmp(strtab + syms[i].st_name, "TOC.") == 0)
+ return &syms[i];
+ }
+ return NULL;
+}
+
int module_frob_arch_sections(Elf64_Ehdr *hdr,
Elf64_Shdr *sechdrs,
char *secstrings,
@@ -271,21 +415,12 @@ static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me)
/* Patch stub to reference function and correct r2 value. */
static inline int create_stub(Elf64_Shdr *sechdrs,
struct ppc64_stub_entry *entry,
- struct ppc64_opd_entry *opd,
+ unsigned long addr,
struct module *me)
{
- Elf64_Half *loc1, *loc2;
long reladdr;
- *entry = ppc64_stub;
-
-#ifdef __LITTLE_ENDIAN__
- loc1 = (Elf64_Half *)&entry->jump[0];
- loc2 = (Elf64_Half *)&entry->jump[4];
-#else
- loc1 = (Elf64_Half *)&entry->jump[2];
- loc2 = (Elf64_Half *)&entry->jump[6];
-#endif
+ memcpy(entry->jump, ppc64_stub_insns, sizeof(ppc64_stub_insns));
/* Stub uses address relative to r2. */
reladdr = (unsigned long)entry - my_r2(sechdrs, me);
@@ -296,35 +431,33 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
}
DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr);
- *loc1 = PPC_HA(reladdr);
- *loc2 = PPC_LO(reladdr);
- entry->opd.funcaddr = opd->funcaddr;
- entry->opd.r2 = opd->r2;
+ entry->jump[0] |= PPC_HA(reladdr);
+ entry->jump[1] |= PPC_LO(reladdr);
+ entry->funcdata = func_desc(addr);
return 1;
}
-/* Create stub to jump to function described in this OPD: we need the
+/* Create stub to jump to function described in this OPD/ptr: we need the
stub to set up the TOC ptr (r2) for the function. */
static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
- unsigned long opdaddr,
+ unsigned long addr,
struct module *me)
{
struct ppc64_stub_entry *stubs;
- struct ppc64_opd_entry *opd = (void *)opdaddr;
unsigned int i, num_stubs;
num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs);
/* Find this stub, or if that fails, the next avail. entry */
stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr;
- for (i = 0; stubs[i].opd.funcaddr; i++) {
+ for (i = 0; stub_func_addr(stubs[i].funcdata); i++) {
BUG_ON(i >= num_stubs);
- if (stubs[i].opd.funcaddr == opd->funcaddr)
+ if (stub_func_addr(stubs[i].funcdata) == func_addr(addr))
return (unsigned long)&stubs[i];
}
- if (!create_stub(sechdrs, &stubs[i], opd, me))
+ if (!create_stub(sechdrs, &stubs[i], addr, me))
return 0;
return (unsigned long)&stubs[i];
@@ -339,7 +472,8 @@ static int restore_r2(u32 *instruction, struct module *me)
me->name, *instruction);
return 0;
}
- *instruction = 0xe8410028; /* ld r2,40(r1) */
+ /* ld r2,R2_STACK_OFFSET(r1) */
+ *instruction = 0xe8410000 | R2_STACK_OFFSET;
return 1;
}
@@ -357,6 +491,17 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
+
+ /* First time we're called, we can fix up .TOC. */
+ if (!me->arch.toc_fixed) {
+ sym = find_dot_toc(sechdrs, strtab, symindex);
+ /* It's theoretically possible that a module doesn't want a
+ * .TOC. so don't fail it just for that. */
+ if (sym)
+ sym->st_value = my_r2(sechdrs, me);
+ me->arch.toc_fixed = true;
+ }
+
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -453,7 +598,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
return -ENOENT;
if (!restore_r2((u32 *)location + 1, me))
return -ENOEXEC;
- }
+ } else
+ value += local_entry_offset(sym);
/* Convert value to relative */
value -= (unsigned long)location;
@@ -474,6 +620,31 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
*location = value - (unsigned long)location;
break;
+ case R_PPC64_TOCSAVE:
+ /*
+ * Marker reloc indicates we don't have to save r2.
+ * That would only save us one instruction, so ignore
+ * it.
+ */
+ break;
+
+ case R_PPC64_REL16_HA:
+ /* Subtract location pointer */
+ value -= (unsigned long)location;
+ value = ((value + 0x8000) >> 16);
+ *((uint16_t *) location)
+ = (*((uint16_t *) location) & ~0xffff)
+ | (value & 0xffff);
+ break;
+
+ case R_PPC64_REL16_LO:
+ /* Subtract location pointer */
+ value -= (unsigned long)location;
+ *((uint16_t *) location)
+ = (*((uint16_t *) location) & ~0xffff)
+ | (value & 0xffff);
+ break;
+
default:
printk("%s: Unknown ADD relocation: %lu\n",
me->name,
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 24d342e917903f58aec6e37d56616aab0e1e029d..b49c72fd7f16510a8969f23b81848545d2a6b3f5 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -21,6 +21,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/delay.h>
#include <linux/export.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
@@ -120,6 +121,25 @@ resource_size_t pcibios_window_alignment(struct pci_bus *bus,
return 1;
}
+void pcibios_reset_secondary_bus(struct pci_dev *dev)
+{
+ u16 ctrl;
+
+ if (ppc_md.pcibios_reset_secondary_bus) {
+ ppc_md.pcibios_reset_secondary_bus(dev);
+ return;
+ }
+
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+ ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+ msleep(2);
+
+ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+ ssleep(1);
+}
+
static resource_size_t pcibios_io_size(const struct pci_controller *hose)
{
#ifdef CONFIG_PPC64
@@ -646,60 +666,36 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
void pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int primary)
{
- const __be32 *ranges;
- int rlen;
- int pna = of_n_addr_cells(dev);
- int np = pna + 5;
int memno = 0;
- u32 pci_space;
- unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
struct resource *res;
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
dev->full_name, primary ? "(primary)" : "");
- /* Get ranges property */
- ranges = of_get_property(dev, "ranges", &rlen);
- if (ranges == NULL)
+ /* Check for ranges property */
+ if (of_pci_range_parser_init(&parser, dev))
return;
/* Parse it */
- while ((rlen -= np * 4) >= 0) {
- /* Read next ranges element */
- pci_space = of_read_number(ranges, 1);
- pci_addr = of_read_number(ranges + 1, 2);
- cpu_addr = of_translate_address(dev, ranges + 3);
- size = of_read_number(ranges + pna + 3, 2);
- ranges += np;
-
+ for_each_of_pci_range(&parser, &range) {
/* If we failed translation or got a zero-sized region
* (some FW try to feed us with non sensical zero sized regions
* such as power3 which look like some kind of attempt at exposing
* the VGA memory hole)
*/
- if (cpu_addr == OF_BAD_ADDR || size == 0)
+ if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
continue;
- /* Now consume following elements while they are contiguous */
- for (; rlen >= np * sizeof(u32);
- ranges += np, rlen -= np * 4) {
- if (of_read_number(ranges, 1) != pci_space)
- break;
- pci_next = of_read_number(ranges + 1, 2);
- cpu_next = of_translate_address(dev, ranges + 3);
- if (pci_next != pci_addr + size ||
- cpu_next != cpu_addr + size)
- break;
- size += of_read_number(ranges + pna + 3, 2);
- }
-
/* Act based on address space type */
res = NULL;
- switch ((pci_space >> 24) & 0x3) {
- case 1: /* PCI IO space */
+ switch (range.flags & IORESOURCE_TYPE_BITS) {
+ case IORESOURCE_IO:
printk(KERN_INFO
" IO 0x%016llx..0x%016llx -> 0x%016llx\n",
- cpu_addr, cpu_addr + size - 1, pci_addr);
+ range.cpu_addr, range.cpu_addr + range.size - 1,
+ range.pci_addr);
/* We support only one IO range */
if (hose->pci_io_size) {
@@ -709,11 +705,12 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
}
#ifdef CONFIG_PPC32
/* On 32 bits, limit I/O space to 16MB */
- if (size > 0x01000000)
- size = 0x01000000;
+ if (range.size > 0x01000000)
+ range.size = 0x01000000;
/* 32 bits needs to map IOs here */
- hose->io_base_virt = ioremap(cpu_addr, size);
+ hose->io_base_virt = ioremap(range.cpu_addr,
+ range.size);
/* Expect trouble if pci_addr is not 0 */
if (primary)
@@ -723,20 +720,20 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
/* pci_io_size and io_base_phys always represent IO
* space starting at 0 so we factor in pci_addr
*/
- hose->pci_io_size = pci_addr + size;
- hose->io_base_phys = cpu_addr - pci_addr;
+ hose->pci_io_size = range.pci_addr + range.size;
+ hose->io_base_phys = range.cpu_addr - range.pci_addr;
/* Build resource */
res = &hose->io_resource;
- res->flags = IORESOURCE_IO;
- res->start = pci_addr;
+ range.cpu_addr = range.pci_addr;
break;
- case 2: /* PCI Memory space */
- case 3: /* PCI 64 bits Memory space */
+ case IORESOURCE_MEM:
printk(KERN_INFO
" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
- cpu_addr, cpu_addr + size - 1, pci_addr,
- (pci_space & 0x40000000) ? "Prefetch" : "");
+ range.cpu_addr, range.cpu_addr + range.size - 1,
+ range.pci_addr,
+ (range.pci_space & 0x40000000) ?
+ "Prefetch" : "");
/* We support only 3 memory ranges */
if (memno >= 3) {
@@ -745,28 +742,21 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
continue;
}
/* Handles ISA memory hole space here */
- if (pci_addr == 0) {
+ if (range.pci_addr == 0) {
if (primary || isa_mem_base == 0)
- isa_mem_base = cpu_addr;
- hose->isa_mem_phys = cpu_addr;
- hose->isa_mem_size = size;
+ isa_mem_base = range.cpu_addr;
+ hose->isa_mem_phys = range.cpu_addr;
+ hose->isa_mem_size = range.size;
}
/* Build resource */
- hose->mem_offset[memno] = cpu_addr - pci_addr;
+ hose->mem_offset[memno] = range.cpu_addr -
+ range.pci_addr;
res = &hose->mem_resources[memno++];
- res->flags = IORESOURCE_MEM;
- if (pci_space & 0x40000000)
- res->flags |= IORESOURCE_PREFETCH;
- res->start = cpu_addr;
break;
}
if (res != NULL) {
- res->name = dev->full_name;
- res->end = res->start + size - 1;
- res->parent = NULL;
- res->sibling = NULL;
- res->child = NULL;
+ of_pci_range_to_resource(&range, dev, res);
}
}
}
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 059e244484fe95cc6cab46729d7771b052bb896a..44562aa97f1611f5bcf1a26b56a425efa0c7a33e 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -304,6 +304,9 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
struct pci_dev *dev = NULL;
const __be32 *reg;
int reglen, devfn;
+#ifdef CONFIG_EEH
+ struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+#endif
pr_debug(" * %s\n", dn->full_name);
if (!of_device_is_available(dn))
@@ -321,6 +324,12 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
return dev;
}
+ /* Device removed permanently ? */
+#ifdef CONFIG_EEH
+ if (edev && (edev->mode & EEH_DEV_REMOVED))
+ return NULL;
+#endif
+
/* create a new pci_dev for this device */
dev = of_create_pci_dev(dn, bus, devfn);
if (!dev)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 450850a49dced7919c3c2d349c2d70aae7cea0ad..48d17d6fca5b6e43ab1c77759f04a87f90c5aa2c 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -155,9 +155,7 @@ EXPORT_SYMBOL(__cmpdi2);
#endif
long long __bswapdi2(long long);
EXPORT_SYMBOL(__bswapdi2);
-#ifdef __BIG_ENDIAN__
EXPORT_SYMBOL(memcpy);
-#endif
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memcmp);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 31d021506d210e6b7cf1fa4136b1067f8163dc05..8a1edbe26b8f34c99beafc8a1d3bff68ec99f765 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -54,6 +54,7 @@
#ifdef CONFIG_PPC64
#include <asm/firmware.h>
#endif
+#include <asm/code-patching.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
@@ -495,14 +496,21 @@ static inline int set_dawr(struct arch_hw_breakpoint *brk)
return 0;
}
-int set_breakpoint(struct arch_hw_breakpoint *brk)
+void __set_breakpoint(struct arch_hw_breakpoint *brk)
{
__get_cpu_var(current_brk) = *brk;
if (cpu_has_feature(CPU_FTR_DAWR))
- return set_dawr(brk);
+ set_dawr(brk);
+ else
+ set_dabr(brk);
+}
- return set_dabr(brk);
+void set_breakpoint(struct arch_hw_breakpoint *brk)
+{
+ preempt_disable();
+ __set_breakpoint(brk);
+ preempt_enable();
}
#ifdef CONFIG_PPC64
@@ -834,7 +842,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
*/
#ifndef CONFIG_HAVE_HW_BREAKPOINT
if (unlikely(!hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk)))
- set_breakpoint(&new->thread.hw_brk);
+ __set_breakpoint(&new->thread.hw_brk);
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif
@@ -1108,7 +1116,9 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
struct thread_info *ti = (void *)task_stack_page(p);
memset(childregs, 0, sizeof(struct pt_regs));
childregs->gpr[1] = sp + sizeof(struct pt_regs);
- childregs->gpr[14] = usp; /* function */
+ /* function */
+ if (usp)
+ childregs->gpr[14] = ppc_function_entry((void *)usp);
#ifdef CONFIG_PPC64
clear_tsk_thread_flag(p, TIF_32BIT);
childregs->softe = 1;
@@ -1187,17 +1197,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
if (cpu_has_feature(CPU_FTR_HAS_PPR))
p->thread.ppr = INIT_PPR;
#endif
- /*
- * The PPC64 ABI makes use of a TOC to contain function
- * pointers. The function (ret_from_except) is actually a pointer
- * to the TOC entry. The first entry is a pointer to the actual
- * function.
- */
-#ifdef CONFIG_PPC64
- kregs->nip = *((unsigned long *)f);
-#else
- kregs->nip = (unsigned long)f;
-#endif
+ kregs->nip = ppc_function_entry(f);
return 0;
}
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index b0c263da219a2b4a0bcfc7ed09b69c26cb12432c..77aa1e95e9046d39908048d8a711c44c83841415 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -23,7 +23,7 @@ strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
reloc_got2 kernstart_addr memstart_addr linux_banner _stext
opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
boot_command_line __prom_init_toc_start __prom_init_toc_end
-btext_setup_display"
+btext_setup_display TOC."
NM="$1"
OBJ="$2"
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 7d4c7172f38ed43d85873c23f5b1e63e733ea093..c168337aef9dd3ccc48c70a00a41d19f4bc3f92d 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -80,10 +80,6 @@ int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
if (ret)
return PCIBIOS_DEVICE_NOT_FOUND;
- if (returnval == EEH_IO_ERROR_VALUE(size) &&
- eeh_dev_check_failure(of_node_to_eeh_dev(pdn->node)))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
return PCIBIOS_SUCCESSFUL;
}
@@ -92,18 +88,39 @@ static int rtas_pci_read_config(struct pci_bus *bus,
int where, int size, u32 *val)
{
struct device_node *busdn, *dn;
-
- busdn = pci_bus_to_OF_node(bus);
+ struct pci_dn *pdn;
+ bool found = false;
+#ifdef CONFIG_EEH
+ struct eeh_dev *edev;
+#endif
+ int ret;
/* Search only direct children of the bus */
+ *val = 0xFFFFFFFF;
+ busdn = pci_bus_to_OF_node(bus);
for (dn = busdn->child; dn; dn = dn->sibling) {
- struct pci_dn *pdn = PCI_DN(dn);
+ pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_is_available(dn))
- return rtas_read_config(pdn, where, size, val);
+ && of_device_is_available(dn)) {
+ found = true;
+ break;
+ }
}
- return PCIBIOS_DEVICE_NOT_FOUND;
+ if (!found)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+#ifdef CONFIG_EEH
+ edev = of_node_to_eeh_dev(dn);
+ if (edev && edev->pe && edev->pe->state & EEH_PE_RESET)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+#endif
+
+ ret = rtas_read_config(pdn, where, size, val);
+ if (*val == EEH_IO_ERROR_VALUE(size) &&
+ eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return ret;
}
int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val)
@@ -136,17 +153,34 @@ static int rtas_pci_write_config(struct pci_bus *bus,
int where, int size, u32 val)
{
struct device_node *busdn, *dn;
-
- busdn = pci_bus_to_OF_node(bus);
+ struct pci_dn *pdn;
+ bool found = false;
+#ifdef CONFIG_EEH
+ struct eeh_dev *edev;
+#endif
+ int ret;
/* Search only direct children of the bus */
+ busdn = pci_bus_to_OF_node(bus);
for (dn = busdn->child; dn; dn = dn->sibling) {
- struct pci_dn *pdn = PCI_DN(dn);
+ pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_is_available(dn))
- return rtas_write_config(pdn, where, size, val);
+ && of_device_is_available(dn)) {
+ found = true;
+ break;
+ }
}
- return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (!found)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+#ifdef CONFIG_EEH
+ edev = of_node_to_eeh_dev(dn);
+ if (edev && edev->pe && (edev->pe->state & EEH_PE_RESET))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+#endif
+ ret = rtas_write_config(pdn, where, size, val);
+
+ return ret;
}
static struct pci_ops rtas_pci_ops = {
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 79b7612ac6fa34f7e1d77c1db95f399f7be3bcc1..aa0f5edd85706655e7070a3243b427b957289391 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -212,6 +212,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
{
unsigned long cpu_id = (unsigned long)v - 1;
unsigned int pvr;
+ unsigned long proc_freq;
unsigned short maj;
unsigned short min;
@@ -263,12 +264,19 @@ static int show_cpuinfo(struct seq_file *m, void *v)
#endif /* CONFIG_TAU */
/*
- * Assume here that all clock rates are the same in a
- * smp system. -- Cort
+ * Platforms that have variable clock rates, should implement
+ * the method ppc_md.get_proc_freq() that reports the clock
+ * rate of a given cpu. The rest can use ppc_proc_freq to
+ * report the clock rate that is same across all cpus.
*/
- if (ppc_proc_freq)
+ if (ppc_md.get_proc_freq)
+ proc_freq = ppc_md.get_proc_freq(cpu_id);
+ else
+ proc_freq = ppc_proc_freq;
+
+ if (proc_freq)
seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
- ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
+ proc_freq / 1000000, proc_freq % 1000000);
if (ppc_md.show_percpuinfo != NULL)
ppc_md.show_percpuinfo(m, cpu_id);
@@ -382,9 +390,10 @@ void __init check_for_initrd(void)
#ifdef CONFIG_SMP
-int threads_per_core, threads_shift;
+int threads_per_core, threads_per_subcore, threads_shift;
cpumask_t threads_core_mask;
EXPORT_SYMBOL_GPL(threads_per_core);
+EXPORT_SYMBOL_GPL(threads_per_subcore);
EXPORT_SYMBOL_GPL(threads_shift);
EXPORT_SYMBOL_GPL(threads_core_mask);
@@ -393,6 +402,7 @@ static void __init cpu_init_thread_core_maps(int tpc)
int i;
threads_per_core = tpc;
+ threads_per_subcore = tpc;
cpumask_clear(&threads_core_mask);
/* This implementation only supports power of 2 number of threads
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fbe24377eda3e4f268d6074e0803dd0891c8c416..ee082d771178d463ff259adef107de4845ed84f2 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -36,6 +36,7 @@
#include <linux/lockdep.h>
#include <linux/memblock.h>
#include <linux/hugetlb.h>
+#include <linux/memory.h>
#include <asm/io.h>
#include <asm/kdump.h>
@@ -341,7 +342,7 @@ void smp_release_cpus(void)
ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
- PHYSICAL_START);
- *ptr = __pa(generic_secondary_smp_init);
+ *ptr = ppc_function_entry(generic_secondary_smp_init);
/* And wait a bit for them to catch up */
for (i = 0; i < 100000; i++) {
@@ -780,6 +781,15 @@ void __init setup_per_cpu_areas(void)
}
#endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+unsigned long memory_block_size_bytes(void)
+{
+ if (ppc_md.memory_block_size)
+ return ppc_md.memory_block_size();
+
+ return MIN_MEMORY_BLOCK_SIZE;
+}
+#endif
#if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
struct ppc_pci_io ppc_pci_io;
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 8fc4177ed65acb6e9b1873f3614fc0457125c783..1c794cef2883ea314b205c8f0aa01a89b54e806a 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -134,7 +134,7 @@ static int do_signal(struct pt_regs *regs)
*/
if (current->thread.hw_brk.address &&
current->thread.hw_brk.type)
- set_breakpoint(¤t->thread.hw_brk);
+ __set_breakpoint(¤t->thread.hw_brk);
#endif
/* Re-enable the breakpoints for the signal stack */
thread_change_pc(current, regs);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 10ffffef041413dc6da76a7c9564e4b79804c72a..7753af2d261381bcc21bf3e21f8ee4f4880847e9 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -36,6 +36,7 @@
#include <linux/atomic.h>
#include <asm/irq.h>
#include <asm/hw_irq.h>
+#include <asm/kvm_ppc.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
@@ -390,6 +391,7 @@ void smp_prepare_boot_cpu(void)
#ifdef CONFIG_PPC64
paca[boot_cpuid].__current = current;
#endif
+ set_numa_node(numa_cpu_lookup_table[boot_cpuid]);
current_set[boot_cpuid] = task_thread_info(current);
}
@@ -457,38 +459,9 @@ int generic_check_cpu_restart(unsigned int cpu)
return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
}
-static atomic_t secondary_inhibit_count;
-
-/*
- * Don't allow secondary CPU threads to come online
- */
-void inhibit_secondary_onlining(void)
+static bool secondaries_inhibited(void)
{
- /*
- * This makes secondary_inhibit_count stable during cpu
- * online/offline operations.
- */
- get_online_cpus();
-
- atomic_inc(&secondary_inhibit_count);
- put_online_cpus();
-}
-EXPORT_SYMBOL_GPL(inhibit_secondary_onlining);
-
-/*
- * Allow secondary CPU threads to come online again
- */
-void uninhibit_secondary_onlining(void)
-{
- get_online_cpus();
- atomic_dec(&secondary_inhibit_count);
- put_online_cpus();
-}
-EXPORT_SYMBOL_GPL(uninhibit_secondary_onlining);
-
-static int secondaries_inhibited(void)
-{
- return atomic_read(&secondary_inhibit_count);
+ return kvm_hv_mode_active();
}
#else /* HOTPLUG_CPU */
@@ -517,7 +490,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
* Don't allow secondary threads to come online if inhibited
*/
if (threads_per_core > 1 && secondaries_inhibited() &&
- cpu % threads_per_core != 0)
+ cpu_thread_in_subcore(cpu))
return -EBUSY;
if (smp_ops == NULL ||
@@ -750,6 +723,12 @@ void start_secondary(void *unused)
}
traverse_core_siblings(cpu, true);
+ /*
+ * numa_node_id() works after this.
+ */
+ set_numa_node(numa_cpu_lookup_table[cpu]);
+ set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
+
smp_wmb();
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index d90d4b7810d69edfa2283367aa7146edbcac8fa0..67fd2fd2620ae64a2f44cced5a25b68d49877c50 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -404,7 +404,7 @@ void ppc_enable_pmcs(void)
}
EXPORT_SYMBOL(ppc_enable_pmcs);
-#define __SYSFS_SPRSETUP(NAME, ADDRESS, EXTRA) \
+#define __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, EXTRA) \
static void read_##NAME(void *val) \
{ \
*(unsigned long *)val = mfspr(ADDRESS); \
@@ -413,7 +413,9 @@ static void write_##NAME(void *val) \
{ \
EXTRA; \
mtspr(ADDRESS, *(unsigned long *)val); \
-} \
+}
+
+#define __SYSFS_SPRSETUP_SHOW_STORE(NAME) \
static ssize_t show_##NAME(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
@@ -436,10 +438,15 @@ static ssize_t __used \
return count; \
}
-#define SYSFS_PMCSETUP(NAME, ADDRESS) \
- __SYSFS_SPRSETUP(NAME, ADDRESS, ppc_enable_pmcs())
-#define SYSFS_SPRSETUP(NAME, ADDRESS) \
- __SYSFS_SPRSETUP(NAME, ADDRESS, )
+#define SYSFS_PMCSETUP(NAME, ADDRESS) \
+ __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ppc_enable_pmcs()) \
+ __SYSFS_SPRSETUP_SHOW_STORE(NAME)
+#define SYSFS_SPRSETUP(NAME, ADDRESS) \
+ __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ) \
+ __SYSFS_SPRSETUP_SHOW_STORE(NAME)
+
+#define SYSFS_SPRSETUP_SHOW_STORE(NAME) \
+ __SYSFS_SPRSETUP_SHOW_STORE(NAME)
/* Let's define all possible registers, we'll only hook up the ones
* that are implemented on the current processor
@@ -477,7 +484,6 @@ SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
SYSFS_SPRSETUP(purr, SPRN_PURR);
SYSFS_SPRSETUP(spurr, SPRN_SPURR);
-SYSFS_SPRSETUP(dscr, SPRN_DSCR);
SYSFS_SPRSETUP(pir, SPRN_PIR);
/*
@@ -487,12 +493,27 @@ SYSFS_SPRSETUP(pir, SPRN_PIR);
*/
static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
static DEVICE_ATTR(spurr, 0400, show_spurr, NULL);
-static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
static DEVICE_ATTR(purr, 0400, show_purr, store_purr);
static DEVICE_ATTR(pir, 0400, show_pir, NULL);
-unsigned long dscr_default = 0;
-EXPORT_SYMBOL(dscr_default);
+static unsigned long dscr_default;
+
+static void read_dscr(void *val)
+{
+ *(unsigned long *)val = get_paca()->dscr_default;
+}
+
+static void write_dscr(void *val)
+{
+ get_paca()->dscr_default = *(unsigned long *)val;
+ if (!current->thread.dscr_inherit) {
+ current->thread.dscr = *(unsigned long *)val;
+ mtspr(SPRN_DSCR, *(unsigned long *)val);
+ }
+}
+
+SYSFS_SPRSETUP_SHOW_STORE(dscr);
+static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
static void add_write_permission_dev_attr(struct device_attribute *attr)
{
@@ -505,14 +526,6 @@ static ssize_t show_dscr_default(struct device *dev,
return sprintf(buf, "%lx\n", dscr_default);
}
-static void update_dscr(void *dummy)
-{
- if (!current->thread.dscr_inherit) {
- current->thread.dscr = dscr_default;
- mtspr(SPRN_DSCR, dscr_default);
- }
-}
-
static ssize_t __used store_dscr_default(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
@@ -525,7 +538,7 @@ static ssize_t __used store_dscr_default(struct device *dev,
return -EINVAL;
dscr_default = val;
- on_each_cpu(update_dscr, NULL, 1);
+ on_each_cpu(write_dscr, &val, 1);
return count;
}
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 93219c34af327b3e113a344485310b8f2923a879..895c50ca943c9527656609956119160ae53a5230 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -17,12 +17,12 @@
#include <asm/ppc_asm.h>
#ifdef CONFIG_PPC64
-#define SYSCALL(func) .llong .sys_##func,.sys_##func
-#define COMPAT_SYS(func) .llong .sys_##func,.compat_sys_##func
-#define PPC_SYS(func) .llong .ppc_##func,.ppc_##func
-#define OLDSYS(func) .llong .sys_ni_syscall,.sys_ni_syscall
-#define SYS32ONLY(func) .llong .sys_ni_syscall,.compat_sys_##func
-#define SYSX(f, f3264, f32) .llong .f,.f3264
+#define SYSCALL(func) .llong DOTSYM(sys_##func),DOTSYM(sys_##func)
+#define COMPAT_SYS(func) .llong DOTSYM(sys_##func),DOTSYM(compat_sys_##func)
+#define PPC_SYS(func) .llong DOTSYM(ppc_##func),DOTSYM(ppc_##func)
+#define OLDSYS(func) .llong DOTSYM(sys_ni_syscall),DOTSYM(sys_ni_syscall)
+#define SYS32ONLY(func) .llong DOTSYM(sys_ni_syscall),DOTSYM(compat_sys_##func)
+#define SYSX(f, f3264, f32) .llong DOTSYM(f),DOTSYM(f3264)
#else
#define SYSCALL(func) .long sys_##func
#define COMPAT_SYS(func) .long sys_##func
@@ -36,6 +36,8 @@
#define PPC_SYS_SPU(func) PPC_SYS(func)
#define SYSX_SPU(f, f3264, f32) SYSX(f, f3264, f32)
+.section .rodata,"a"
+
#ifdef CONFIG_PPC64
#define sys_sigpending sys_ni_syscall
#define sys_old_getrlimit sys_ni_syscall
@@ -43,5 +45,7 @@
.p2align 3
#endif
-_GLOBAL(sys_call_table)
+.globl sys_call_table
+sys_call_table:
+
#include <asm/systbl.h>
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 03567c05950a3cf5ee465ef0d3a8e540ad5594a8..2a324f4cb1b9bd2d7354b783641d40ed54c5a2c2 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -10,6 +10,7 @@
#include <asm/ppc-opcode.h>
#include <asm/ptrace.h>
#include <asm/reg.h>
+#include <asm/bug.h>
#ifdef CONFIG_VSX
/* See fpu.S, this is borrowed from there */
@@ -41,7 +42,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
/* Stack frame offsets for local variables. */
#define TM_FRAME_L0 TM_FRAME_SIZE-16
#define TM_FRAME_L1 TM_FRAME_SIZE-8
-#define STACK_PARAM(x) (48+((x)*8))
/* In order to access the TM SPRs, TM must be enabled. So, do so: */
@@ -78,12 +78,6 @@ _GLOBAL(tm_abort)
TABORT(R3)
blr
- .section ".toc","aw"
-DSCR_DEFAULT:
- .tc dscr_default[TC],dscr_default
-
- .section ".text"
-
/* void tm_reclaim(struct thread_struct *thread,
* unsigned long orig_msr,
* uint8_t cause)
@@ -108,12 +102,12 @@ _GLOBAL(tm_reclaim)
mflr r0
stw r6, 8(r1)
std r0, 16(r1)
- std r2, 40(r1)
+ std r2, STK_GOT(r1)
stdu r1, -TM_FRAME_SIZE(r1)
/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */
- std r3, STACK_PARAM(0)(r1)
+ std r3, STK_PARAM(R3)(r1)
SAVE_NVGPRS(r1)
/* We need to setup MSR for VSX register save instructions. Here we
@@ -175,6 +169,13 @@ dont_backup_vec:
stfd fr0,FPSTATE_FPSCR(r7)
dont_backup_fp:
+ /* Do sanity check on MSR to make sure we are suspended */
+ li r7, (MSR_TS_S)@higher
+ srdi r6, r14, 32
+ and r6, r6, r7
+1: tdeqi r6, 0
+ EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
/* The moment we treclaim, ALL of our GPRs will switch
* to user register state. (FPRs, CCR etc. also!)
* Use an sprg and a tm_scratch in the PACA to shuffle.
@@ -202,7 +203,7 @@ dont_backup_fp:
/* Now get some more GPRS free */
std r7, GPR7(r1) /* Temporary stash */
std r12, GPR12(r1) /* '' '' '' */
- ld r12, STACK_PARAM(0)(r1) /* Param 0, thread_struct * */
+ ld r12, STK_PARAM(R3)(r1) /* Param 0, thread_struct * */
std r11, THREAD_TM_PPR(r12) /* Store PPR and free r11 */
@@ -289,11 +290,10 @@ dont_backup_fp:
ld r0, 16(r1)
mtcr r4
mtlr r0
- ld r2, 40(r1)
+ ld r2, STK_GOT(r1)
- /* Load system default DSCR */
- ld r4, DSCR_DEFAULT@toc(r2)
- ld r0, 0(r4)
+ /* Load CPU's default DSCR */
+ ld r0, PACA_DSCR(r13)
mtspr SPRN_DSCR, r0
blr
@@ -312,7 +312,7 @@ _GLOBAL(__tm_recheckpoint)
mflr r0
stw r5, 8(r1)
std r0, 16(r1)
- std r2, 40(r1)
+ std r2, STK_GOT(r1)
stdu r1, -TM_FRAME_SIZE(r1)
/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD].
@@ -320,8 +320,6 @@ _GLOBAL(__tm_recheckpoint)
*/
SAVE_NVGPRS(r1)
- std r1, PACAR1(r13)
-
/* Load complete register state from ts_ckpt* registers */
addi r7, r3, PT_CKPT_REGS /* Thread's ckpt_regs */
@@ -385,12 +383,10 @@ restore_gprs:
/* ******************** CR,LR,CCR,MSR ********** */
ld r4, _CTR(r7)
ld r5, _LINK(r7)
- ld r6, _CCR(r7)
ld r8, _XER(r7)
mtctr r4
mtlr r5
- mtcr r6
mtxer r8
/* ******************** TAR ******************** */
@@ -406,7 +402,8 @@ restore_gprs:
li r4, 0
mtmsrd r4, 1
- REST_4GPRS(0, r7) /* GPR0-3 */
+ REST_GPR(0, r7) /* GPR0 */
+ REST_2GPRS(2, r7) /* GPR2-3 */
REST_GPR(4, r7) /* GPR4 */
REST_4GPRS(8, r7) /* GPR8-11 */
REST_2GPRS(12, r7) /* GPR12-13 */
@@ -418,6 +415,31 @@ restore_gprs:
mtspr SPRN_DSCR, r5
mtspr SPRN_PPR, r6
+ /* Do final sanity check on TEXASR to make sure FS is set. Do this
+ * here before we load up the userspace r1 so any bugs we hit will get
+ * a call chain */
+ mfspr r5, SPRN_TEXASR
+ srdi r5, r5, 16
+ li r6, (TEXASR_FS)@h
+ and r6, r6, r5
+1: tdeqi r6, 0
+ EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
+ /* Do final sanity check on MSR to make sure we are not transactional
+ * or suspended
+ */
+ mfmsr r6
+ li r5, (MSR_TS_MASK)@higher
+ srdi r6, r6, 32
+ and r6, r6, r5
+1: tdnei r6, 0
+ EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
+ /* Restore CR */
+ ld r6, _CCR(r7)
+ mtcr r6
+
+ REST_GPR(1, r7) /* GPR1 */
REST_GPR(5, r7) /* GPR5-7 */
REST_GPR(6, r7)
ld r7, GPR7(r7)
@@ -448,11 +470,10 @@ restore_gprs:
ld r0, 16(r1)
mtcr r4
mtlr r0
- ld r2, 40(r1)
+ ld r2, STK_GOT(r1)
- /* Load system default DSCR */
- ld r4, DSCR_DEFAULT@toc(r2)
- ld r0, 0(r4)
+ /* Load CPU's default DSCR */
+ ld r0, PACA_DSCR(r13)
mtspr SPRN_DSCR, r0
blr
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index aba05bbb3e744b6e516afbe9093923793762040d..7a12edbb61e7c2c9f6851bc0ef01e6b0b398ed83 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1236,7 +1236,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
int core;
struct kvmppc_vcore *vcore;
- core = id / threads_per_core;
+ core = id / threads_per_subcore;
if (core >= KVM_MAX_VCORES)
goto out;
@@ -1286,7 +1286,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
init_waitqueue_head(&vcore->wq);
vcore->preempt_tb = TB_NIL;
vcore->lpcr = kvm->arch.lpcr;
- vcore->first_vcpuid = core * threads_per_core;
+ vcore->first_vcpuid = core * threads_per_subcore;
vcore->kvm = kvm;
}
kvm->arch.vcores[core] = vcore;
@@ -1476,16 +1476,19 @@ static void kvmppc_wait_for_nap(struct kvmppc_vcore *vc)
static int on_primary_thread(void)
{
int cpu = smp_processor_id();
- int thr = cpu_thread_in_core(cpu);
+ int thr;
- if (thr)
+ /* Are we on a primary subcore? */
+ if (cpu_thread_in_subcore(cpu))
return 0;
- while (++thr < threads_per_core)
+
+ thr = 0;
+ while (++thr < threads_per_subcore)
if (cpu_online(cpu + thr))
return 0;
/* Grab all hw threads so they can't go into the kernel */
- for (thr = 1; thr < threads_per_core; ++thr) {
+ for (thr = 1; thr < threads_per_subcore; ++thr) {
if (kvmppc_grab_hwthread(cpu + thr)) {
/* Couldn't grab one; let the others go */
do {
@@ -1544,15 +1547,18 @@ static void kvmppc_run_core(struct kvmppc_vcore *vc)
}
/*
- * Make sure we are running on thread 0, and that
- * secondary threads are offline.
+ * Make sure we are running on primary threads, and that secondary
+ * threads are offline. Also check if the number of threads in this
+ * guest are greater than the current system threads per guest.
*/
- if (threads_per_core > 1 && !on_primary_thread()) {
+ if ((threads_per_core > 1) &&
+ ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) {
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
vcpu->arch.ret = -EBUSY;
goto out;
}
+
vc->pcpu = smp_processor_id();
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
kvmppc_start_thread(vcpu);
@@ -1580,7 +1586,7 @@ static void kvmppc_run_core(struct kvmppc_vcore *vc)
/* wait for secondary threads to finish writing their state to memory */
if (vc->nap_count < vc->n_woken)
kvmppc_wait_for_nap(vc);
- for (i = 0; i < threads_per_core; ++i)
+ for (i = 0; i < threads_per_subcore; ++i)
kvmppc_release_hwthread(vc->pcpu + i);
/* prevent other vcpu threads from doing kvmppc_start_thread() now */
vc->vcore_state = VCORE_EXITING;
@@ -2305,10 +2311,10 @@ static int kvmppc_core_init_vm_hv(struct kvm *kvm)
spin_lock_init(&kvm->arch.slot_phys_lock);
/*
- * Don't allow secondary CPU threads to come online
- * while any KVM VMs exist.
+ * Track that we now have a HV mode VM active. This blocks secondary
+ * CPU threads from coming online.
*/
- inhibit_secondary_onlining();
+ kvm_hv_vm_activated();
return 0;
}
@@ -2324,7 +2330,7 @@ static void kvmppc_free_vcores(struct kvm *kvm)
static void kvmppc_core_destroy_vm_hv(struct kvm *kvm)
{
- uninhibit_secondary_onlining();
+ kvm_hv_vm_deactivated();
kvmppc_free_vcores(kvm);
if (kvm->arch.rma) {
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 8cd0daebb82deea5b6785dbba4e55d12d3d6ac88..7cde8a6652056c26f4e05343439c90ca43328188 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/cpu.h>
#include <linux/kvm_host.h>
#include <linux/preempt.h>
#include <linux/export.h>
@@ -181,3 +182,33 @@ void __init kvm_cma_reserve(void)
kvm_cma_declare_contiguous(selected_size, align_size);
}
}
+
+/*
+ * When running HV mode KVM we need to block certain operations while KVM VMs
+ * exist in the system. We use a counter of VMs to track this.
+ *
+ * One of the operations we need to block is onlining of secondaries, so we
+ * protect hv_vm_count with get/put_online_cpus().
+ */
+static atomic_t hv_vm_count;
+
+void kvm_hv_vm_activated(void)
+{
+ get_online_cpus();
+ atomic_inc(&hv_vm_count);
+ put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(kvm_hv_vm_activated);
+
+void kvm_hv_vm_deactivated(void)
+{
+ get_online_cpus();
+ atomic_dec(&hv_vm_count);
+ put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(kvm_hv_vm_deactivated);
+
+bool kvm_hv_mode_active(void)
+{
+ return atomic_read(&hv_vm_count) != 0;
+}
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index e18e3cfc32debeb21248301c078c229ab59c5e8e..8c86422a1e37a706627dac1ac49ea19ed89a0ee7 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -171,7 +171,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
#endif /* CONFIG_SMP */
/* Jump to partition switch code */
- bl .kvmppc_hv_entry_trampoline
+ bl kvmppc_hv_entry_trampoline
nop
/*
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 974793435a2e20e82a22780b3e7ad330c17ccf40..77356fd25ccc96a8b4fd17746ea08edc0da16060 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -292,8 +292,7 @@ kvm_start_guest:
beq kvm_no_guest
/* Set HSTATE_DSCR(r13) to something sensible */
- LOAD_REG_ADDR(r6, dscr_default)
- ld r6, 0(r6)
+ ld r6, PACA_DSCR(r13)
std r6, HSTATE_DSCR(r13)
bl kvmppc_hv_entry
@@ -1799,7 +1798,7 @@ kvmppc_hdsi:
/* Search the hash table. */
mr r3, r9 /* vcpu pointer */
li r7, 1 /* data fault */
- bl .kvmppc_hpte_hv_fault
+ bl kvmppc_hpte_hv_fault
ld r9, HSTATE_KVM_VCPU(r13)
ld r10, VCPU_PC(r9)
ld r11, VCPU_MSR(r9)
@@ -1873,7 +1872,7 @@ kvmppc_hisi:
mr r4, r10
mr r6, r11
li r7, 0 /* instruction fault */
- bl .kvmppc_hpte_hv_fault
+ bl kvmppc_hpte_hv_fault
ld r9, HSTATE_KVM_VCPU(r13)
ld r10, VCPU_PC(r9)
ld r11, VCPU_MSR(r9)
@@ -1947,16 +1946,16 @@ hcall_real_fallback:
.globl hcall_real_table
hcall_real_table:
.long 0 /* 0 - unused */
- .long .kvmppc_h_remove - hcall_real_table
- .long .kvmppc_h_enter - hcall_real_table
- .long .kvmppc_h_read - hcall_real_table
+ .long DOTSYM(kvmppc_h_remove) - hcall_real_table
+ .long DOTSYM(kvmppc_h_enter) - hcall_real_table
+ .long DOTSYM(kvmppc_h_read) - hcall_real_table
.long 0 /* 0x10 - H_CLEAR_MOD */
.long 0 /* 0x14 - H_CLEAR_REF */
- .long .kvmppc_h_protect - hcall_real_table
- .long .kvmppc_h_get_tce - hcall_real_table
- .long .kvmppc_h_put_tce - hcall_real_table
+ .long DOTSYM(kvmppc_h_protect) - hcall_real_table
+ .long DOTSYM(kvmppc_h_get_tce) - hcall_real_table
+ .long DOTSYM(kvmppc_h_put_tce) - hcall_real_table
.long 0 /* 0x24 - H_SET_SPRG0 */
- .long .kvmppc_h_set_dabr - hcall_real_table
+ .long DOTSYM(kvmppc_h_set_dabr) - hcall_real_table
.long 0 /* 0x2c */
.long 0 /* 0x30 */
.long 0 /* 0x34 */
@@ -1972,11 +1971,11 @@ hcall_real_table:
.long 0 /* 0x5c */
.long 0 /* 0x60 */
#ifdef CONFIG_KVM_XICS
- .long .kvmppc_rm_h_eoi - hcall_real_table
- .long .kvmppc_rm_h_cppr - hcall_real_table
- .long .kvmppc_rm_h_ipi - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_eoi) - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_cppr) - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_ipi) - hcall_real_table
.long 0 /* 0x70 - H_IPOLL */
- .long .kvmppc_rm_h_xirr - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_xirr) - hcall_real_table
#else
.long 0 /* 0x64 - H_EOI */
.long 0 /* 0x68 - H_CPPR */
@@ -2010,7 +2009,7 @@ hcall_real_table:
.long 0 /* 0xd4 */
.long 0 /* 0xd8 */
.long 0 /* 0xdc */
- .long .kvmppc_h_cede - hcall_real_table
+ .long DOTSYM(kvmppc_h_cede) - hcall_real_table
.long 0 /* 0xe4 */
.long 0 /* 0xe8 */
.long 0 /* 0xec */
@@ -2027,11 +2026,11 @@ hcall_real_table:
.long 0 /* 0x118 */
.long 0 /* 0x11c */
.long 0 /* 0x120 */
- .long .kvmppc_h_bulk_remove - hcall_real_table
+ .long DOTSYM(kvmppc_h_bulk_remove) - hcall_real_table
.long 0 /* 0x128 */
.long 0 /* 0x12c */
.long 0 /* 0x130 */
- .long .kvmppc_h_set_xdabr - hcall_real_table
+ .long DOTSYM(kvmppc_h_set_xdabr) - hcall_real_table
hcall_real_table_end:
ignore_hdec:
@@ -2256,7 +2255,7 @@ kvm_cede_exit:
/* Try to handle a machine check in real mode */
machine_check_realmode:
mr r3, r9 /* get vcpu pointer */
- bl .kvmppc_realmode_machine_check
+ bl kvmppc_realmode_machine_check
nop
cmpdi r3, 0 /* continue exiting from guest? */
ld r9, HSTATE_KVM_VCPU(r13)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index bab20f4104430489674b5c05e4a1223036e2eac3..61c738ab128383064f86d159cb6bd2dacbcc17b9 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -426,7 +426,7 @@ int kvm_dev_ioctl_check_extension(long ext)
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_SMT:
if (hv_enabled)
- r = threads_per_core;
+ r = threads_per_subcore;
else
r = 0;
break;
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 95a20e17dbff2c79557a18dba8f553a0f3a323d2..59fa2de9546d7fb0ba8ca05729ad78e75e0a9e88 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -23,9 +23,7 @@ obj-y += checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC64) += checksum_wrappers_64.o
endif
-ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),)
obj-$(CONFIG_PPC64) += memcpy_power7.o memcpy_64.o
-endif
obj-$(CONFIG_PPC_EMULATE_SSTEP) += sstep.o ldstfp.o
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 9f9434a8526443c482b715b74824f99c99d86f0c..a3c4dc4defdd86e02ad098fa0269c68170935e78 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -16,11 +16,11 @@ PPC64_CACHES:
.tc ppc64_caches[TC],ppc64_caches
.section ".text"
-_GLOBAL(copy_page)
+_GLOBAL_TOC(copy_page)
BEGIN_FTR_SECTION
lis r5,PAGE_SIZE@h
FTR_SECTION_ELSE
- b .copypage_power7
+ b copypage_power7
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
ori r5,r5,PAGE_SIZE@l
BEGIN_FTR_SECTION
diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S
index 395c594722a223e339944905ddeb675670c9085e..d7dafb3777acc6badda7b391ebc48580f37710a8 100644
--- a/arch/powerpc/lib/copypage_power7.S
+++ b/arch/powerpc/lib/copypage_power7.S
@@ -56,15 +56,15 @@ _GLOBAL(copypage_power7)
#ifdef CONFIG_ALTIVEC
mflr r0
- std r3,48(r1)
- std r4,56(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
- bl .enter_vmx_copy
+ bl enter_vmx_copy
cmpwi r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+48(r1)
- ld r4,STACKFRAMESIZE+56(r1)
+ ld r3,STK_REG(R31)(r1)
+ ld r4,STK_REG(R30)(r1)
mtlr r0
li r0,(PAGE_SIZE/128)
@@ -103,7 +103,7 @@ _GLOBAL(copypage_power7)
addi r3,r3,128
bdnz 1b
- b .exit_vmx_copy /* tail call optimise */
+ b exit_vmx_copy /* tail call optimise */
#else
li r0,(PAGE_SIZE/128)
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 596a285c07554d65dfd561367a52ffed47aba55d..0860ee46013c93a4952cd8147c76aa600f66506f 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -18,7 +18,7 @@
#endif
.align 7
-_GLOBAL(__copy_tofrom_user)
+_GLOBAL_TOC(__copy_tofrom_user)
BEGIN_FTR_SECTION
nop
FTR_SECTION_ELSE
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index e8e9c36dc7844455c4b24356cdff5f9ed9e70aff..c46c876ac96af693445e91da8204ade16169ece6 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -66,7 +66,7 @@
ld r15,STK_REG(R15)(r1)
ld r14,STK_REG(R14)(r1)
.Ldo_err3:
- bl .exit_vmx_usercopy
+ bl exit_vmx_usercopy
ld r0,STACKFRAMESIZE+16(r1)
mtlr r0
b .Lexit
@@ -85,9 +85,9 @@
.Lexit:
addi r1,r1,STACKFRAMESIZE
.Ldo_err1:
- ld r3,48(r1)
- ld r4,56(r1)
- ld r5,64(r1)
+ ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ ld r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ ld r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
b __copy_tofrom_user_base
@@ -96,18 +96,18 @@ _GLOBAL(__copy_tofrom_user_power7)
cmpldi r5,16
cmpldi cr1,r5,4096
- std r3,48(r1)
- std r4,56(r1)
- std r5,64(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ std r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
blt .Lshort_copy
bgt cr1,.Lvmx_copy
#else
cmpldi r5,16
- std r3,48(r1)
- std r4,56(r1)
- std r5,64(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ std r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
blt .Lshort_copy
#endif
@@ -295,12 +295,12 @@ err1; stb r0,0(r3)
mflr r0
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
- bl .enter_vmx_usercopy
+ bl enter_vmx_usercopy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+48(r1)
- ld r4,STACKFRAMESIZE+56(r1)
- ld r5,STACKFRAMESIZE+64(r1)
+ ld r3,STK_REG(R31)(r1)
+ ld r4,STK_REG(R30)(r1)
+ ld r5,STK_REG(R29)(r1)
mtlr r0
/*
@@ -514,7 +514,7 @@ err3; lbz r0,0(r4)
err3; stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- b .exit_vmx_usercopy /* tail call optimise */
+ b exit_vmx_usercopy /* tail call optimise */
.Lvmx_unaligned_copy:
/* Get the destination 16B aligned */
@@ -717,5 +717,5 @@ err3; lbz r0,0(r4)
err3; stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- b .exit_vmx_usercopy /* tail call optimise */
+ b exit_vmx_usercopy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/hweight_64.S b/arch/powerpc/lib/hweight_64.S
index 9b96ff2ecd4dadb0aae350e80fde94fb93afb20b..19e66001a4f9d5ab6b1c1e7cc6f15c9b50b83b55 100644
--- a/arch/powerpc/lib/hweight_64.S
+++ b/arch/powerpc/lib/hweight_64.S
@@ -24,7 +24,7 @@
_GLOBAL(__arch_hweight8)
BEGIN_FTR_SECTION
- b .__sw_hweight8
+ b __sw_hweight8
nop
nop
FTR_SECTION_ELSE
@@ -35,7 +35,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
_GLOBAL(__arch_hweight16)
BEGIN_FTR_SECTION
- b .__sw_hweight16
+ b __sw_hweight16
nop
nop
nop
@@ -57,7 +57,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
_GLOBAL(__arch_hweight32)
BEGIN_FTR_SECTION
- b .__sw_hweight32
+ b __sw_hweight32
nop
nop
nop
@@ -82,7 +82,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
_GLOBAL(__arch_hweight64)
BEGIN_FTR_SECTION
- b .__sw_hweight64
+ b __sw_hweight64
nop
nop
nop
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
index f4fcb0bc65639225b2fca58ace18025870bc471b..0738f96befbff76829e1119a5feefc915be39da8 100644
--- a/arch/powerpc/lib/mem_64.S
+++ b/arch/powerpc/lib/mem_64.S
@@ -79,8 +79,8 @@ _GLOBAL(memset)
_GLOBAL(memmove)
cmplw 0,r3,r4
- bgt .backwards_memcpy
- b .memcpy
+ bgt backwards_memcpy
+ b memcpy
_GLOBAL(backwards_memcpy)
rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 72ad055168a333ed31ebd5c0c014ff00f6c7436a..32a06ec395d2108202762c6d164b3994ca6a7644 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -10,14 +10,29 @@
#include <asm/ppc_asm.h>
.align 7
-_GLOBAL(memcpy)
+_GLOBAL_TOC(memcpy)
BEGIN_FTR_SECTION
- std r3,48(r1) /* save destination pointer for return value */
+#ifdef __LITTLE_ENDIAN__
+ cmpdi cr7,r5,0
+#else
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* save destination pointer for return value */
+#endif
FTR_SECTION_ELSE
#ifndef SELFTEST
b memcpy_power7
#endif
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
+#ifdef __LITTLE_ENDIAN__
+ /* dumb little-endian memcpy that will get replaced at runtime */
+ addi r9,r3,-1
+ addi r4,r4,-1
+ beqlr cr7
+ mtctr r5
+1: lbzu r10,1(r4)
+ stbu r10,1(r9)
+ bdnz 1b
+ blr
+#else
PPC_MTOCRF(0x01,r5)
cmpldi cr1,r5,16
neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry
@@ -73,7 +88,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
2: bf cr7*4+3,3f
lbz r9,8(r4)
stb r9,0(r3)
-3: ld r3,48(r1) /* return dest pointer */
+3: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */
blr
.Lsrc_unaligned:
@@ -156,7 +171,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
2: bf cr7*4+3,3f
rotldi r9,r9,8
stb r9,0(r3)
-3: ld r3,48(r1) /* return dest pointer */
+3: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */
blr
.Ldst_unaligned:
@@ -201,5 +216,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
3: bf cr7*4+3,4f
lbz r0,0(r4)
stb r0,0(r3)
-4: ld r3,48(r1) /* return dest pointer */
+4: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */
blr
+#endif
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index e4177dbea6bd6a9e59e1cfc548195b1223b8eb0d..2ff5c142f87ba061257f1f00fcc948bc4cb04780 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -33,14 +33,14 @@ _GLOBAL(memcpy_power7)
cmpldi r5,16
cmpldi cr1,r5,4096
- std r3,48(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
blt .Lshort_copy
bgt cr1,.Lvmx_copy
#else
cmpldi r5,16
- std r3,48(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
blt .Lshort_copy
#endif
@@ -216,7 +216,7 @@ _GLOBAL(memcpy_power7)
lbz r0,0(r4)
stb r0,0(r3)
-15: ld r3,48(r1)
+15: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
blr
.Lunwind_stack_nonvmx_copy:
@@ -226,16 +226,16 @@ _GLOBAL(memcpy_power7)
#ifdef CONFIG_ALTIVEC
.Lvmx_copy:
mflr r0
- std r4,56(r1)
- std r5,64(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ std r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
- bl .enter_vmx_copy
+ bl enter_vmx_copy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+48(r1)
- ld r4,STACKFRAMESIZE+56(r1)
- ld r5,STACKFRAMESIZE+64(r1)
+ ld r3,STK_REG(R31)(r1)
+ ld r4,STK_REG(R30)(r1)
+ ld r5,STK_REG(R29)(r1)
mtlr r0
/*
@@ -447,8 +447,8 @@ _GLOBAL(memcpy_power7)
stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- ld r3,48(r1)
- b .exit_vmx_copy /* tail call optimise */
+ ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ b exit_vmx_copy /* tail call optimise */
.Lvmx_unaligned_copy:
/* Get the destination 16B aligned */
@@ -651,6 +651,6 @@ _GLOBAL(memcpy_power7)
stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- ld r3,48(r1)
- b .exit_vmx_copy /* tail call optimise */
+ ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ b exit_vmx_copy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/string_64.S b/arch/powerpc/lib/string_64.S
index 3b1e48049faf3fc0f661c00915b8193471dcf26a..7bd9549a90a23f0c82fa5688f1e2ebf8c3845e7f 100644
--- a/arch/powerpc/lib/string_64.S
+++ b/arch/powerpc/lib/string_64.S
@@ -77,7 +77,7 @@ err3; stb r0,0(r3)
mr r3,r4
blr
-_GLOBAL(__clear_user)
+_GLOBAL_TOC(__clear_user)
cmpdi r4,32
neg r6,r3
li r0,0
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 1136d26a95ae02ac075914e13f54720864b71fea..057cbbb4c576d3377ca6f21b46d4b574114ef2be 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -159,7 +159,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
- bl .hash_page_do_lazy_icache
+ bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
@@ -201,7 +201,8 @@ htab_insert_pte:
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert1)
+.globl htab_call_hpte_insert1
+htab_call_hpte_insert1:
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge htab_pte_insert_ok /* Insertion successful */
@@ -225,7 +226,8 @@ _GLOBAL(htab_call_hpte_insert1)
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert2)
+.globl htab_call_hpte_insert2
+htab_call_hpte_insert2:
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ htab_pte_insert_ok /* Insertion successful */
@@ -242,7 +244,8 @@ _GLOBAL(htab_call_hpte_insert2)
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
-_GLOBAL(htab_call_hpte_remove)
+.globl htab_call_hpte_remove
+htab_call_hpte_remove:
bl . /* Patched by htab_finish_init() */
/* Try all again */
@@ -296,7 +299,8 @@ htab_modify_pte:
li r7,MMU_PAGE_4K /* actual page size */
ld r8,STK_PARAM(R9)(r1) /* segment size */
ld r9,STK_PARAM(R8)(r1) /* get "local" param */
-_GLOBAL(htab_call_hpte_updatepp)
+.globl htab_call_hpte_updatepp
+htab_call_hpte_updatepp:
bl . /* Patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
@@ -471,7 +475,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
- bl .hash_page_do_lazy_icache
+ bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
@@ -526,7 +530,8 @@ htab_special_pfn:
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert1)
+.globl htab_call_hpte_insert1
+htab_call_hpte_insert1:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge htab_pte_insert_ok /* Insertion successful */
@@ -554,7 +559,8 @@ _GLOBAL(htab_call_hpte_insert1)
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert2)
+.globl htab_call_hpte_insert2
+htab_call_hpte_insert2:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ htab_pte_insert_ok /* Insertion successful */
@@ -571,7 +577,8 @@ _GLOBAL(htab_call_hpte_insert2)
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
-_GLOBAL(htab_call_hpte_remove)
+.globl htab_call_hpte_remove
+htab_call_hpte_remove:
bl . /* patched by htab_finish_init() */
/* Try all again */
@@ -588,7 +595,7 @@ htab_inval_old_hpte:
li r6,MMU_PAGE_64K /* psize */
ld r7,STK_PARAM(R9)(r1) /* ssize */
ld r8,STK_PARAM(R8)(r1) /* local */
- bl .flush_hash_page
+ bl flush_hash_page
/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
lis r0,_PAGE_HPTE_SUB@h
ori r0,r0,_PAGE_HPTE_SUB@l
@@ -660,7 +667,8 @@ htab_modify_pte:
li r7,MMU_PAGE_4K /* actual page size */
ld r8,STK_PARAM(R9)(r1) /* segment size */
ld r9,STK_PARAM(R8)(r1) /* get "local" param */
-_GLOBAL(htab_call_hpte_updatepp)
+.globl htab_call_hpte_updatepp
+htab_call_hpte_updatepp:
bl . /* patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
@@ -812,7 +820,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
- bl .hash_page_do_lazy_icache
+ bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
@@ -857,7 +865,8 @@ ht64_insert_pte:
li r8,MMU_PAGE_64K
li r9,MMU_PAGE_64K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(ht64_call_hpte_insert1)
+.globl ht64_call_hpte_insert1
+ht64_call_hpte_insert1:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge ht64_pte_insert_ok /* Insertion successful */
@@ -881,7 +890,8 @@ _GLOBAL(ht64_call_hpte_insert1)
li r8,MMU_PAGE_64K
li r9,MMU_PAGE_64K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(ht64_call_hpte_insert2)
+.globl ht64_call_hpte_insert2
+ht64_call_hpte_insert2:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ ht64_pte_insert_ok /* Insertion successful */
@@ -898,7 +908,8 @@ _GLOBAL(ht64_call_hpte_insert2)
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
-_GLOBAL(ht64_call_hpte_remove)
+.globl ht64_call_hpte_remove
+ht64_call_hpte_remove:
bl . /* patched by htab_finish_init() */
/* Try all again */
@@ -952,7 +963,8 @@ ht64_modify_pte:
li r7,MMU_PAGE_64K /* actual page size */
ld r8,STK_PARAM(R9)(r1) /* segment size */
ld r9,STK_PARAM(R8)(r1) /* get "local" param */
-_GLOBAL(ht64_call_hpte_updatepp)
+.globl ht64_call_hpte_updatepp
+ht64_call_hpte_updatepp:
bl . /* patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 350aa58a6f9578da23cafde65b094cb1c2532c55..88fdd9d25077f2e77076ffb3197f6ec63844262e 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -449,6 +449,24 @@ static void mmu_psize_set_default_penc(void)
mmu_psize_defs[bpsize].penc[apsize] = -1;
}
+#ifdef CONFIG_PPC_64K_PAGES
+
+static bool might_have_hea(void)
+{
+ /*
+ * The HEA ethernet adapter requires awareness of the
+ * GX bus. Without that awareness we can easily assume
+ * we will never see an HEA ethernet device.
+ */
+#ifdef CONFIG_IBMEBUS
+ return !cpu_has_feature(CPU_FTR_ARCH_207S);
+#else
+ return false;
+#endif
+}
+
+#endif /* #ifdef CONFIG_PPC_64K_PAGES */
+
static void __init htab_init_page_sizes(void)
{
int rc;
@@ -503,10 +521,11 @@ static void __init htab_init_page_sizes(void)
mmu_linear_psize = MMU_PAGE_64K;
if (mmu_has_feature(MMU_FTR_CI_LARGE_PAGE)) {
/*
- * Don't use 64k pages for ioremap on pSeries, since
- * that would stop us accessing the HEA ethernet.
+ * When running on pSeries using 64k pages for ioremap
+ * would stop us accessing the HEA ethernet. So if we
+ * have the chance of ever seeing one, stay at 4k.
*/
- if (!machine_is(pseries))
+ if (!might_have_hea() || !machine_is(pseries))
mmu_io_psize = MMU_PAGE_64K;
} else
mmu_ci_restrictions = 1;
@@ -607,47 +626,43 @@ int remove_section_mapping(unsigned long start, unsigned long end)
}
#endif /* CONFIG_MEMORY_HOTPLUG */
-#define FUNCTION_TEXT(A) ((*(unsigned long *)(A)))
+extern u32 htab_call_hpte_insert1[];
+extern u32 htab_call_hpte_insert2[];
+extern u32 htab_call_hpte_remove[];
+extern u32 htab_call_hpte_updatepp[];
+extern u32 ht64_call_hpte_insert1[];
+extern u32 ht64_call_hpte_insert2[];
+extern u32 ht64_call_hpte_remove[];
+extern u32 ht64_call_hpte_updatepp[];
static void __init htab_finish_init(void)
{
- extern unsigned int *htab_call_hpte_insert1;
- extern unsigned int *htab_call_hpte_insert2;
- extern unsigned int *htab_call_hpte_remove;
- extern unsigned int *htab_call_hpte_updatepp;
-
#ifdef CONFIG_PPC_HAS_HASH_64K
- extern unsigned int *ht64_call_hpte_insert1;
- extern unsigned int *ht64_call_hpte_insert2;
- extern unsigned int *ht64_call_hpte_remove;
- extern unsigned int *ht64_call_hpte_updatepp;
-
patch_branch(ht64_call_hpte_insert1,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(ht64_call_hpte_insert2,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(ht64_call_hpte_remove,
- FUNCTION_TEXT(ppc_md.hpte_remove),
+ ppc_function_entry(ppc_md.hpte_remove),
BRANCH_SET_LINK);
patch_branch(ht64_call_hpte_updatepp,
- FUNCTION_TEXT(ppc_md.hpte_updatepp),
+ ppc_function_entry(ppc_md.hpte_updatepp),
BRANCH_SET_LINK);
-
#endif /* CONFIG_PPC_HAS_HASH_64K */
patch_branch(htab_call_hpte_insert1,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(htab_call_hpte_insert2,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(htab_call_hpte_remove,
- FUNCTION_TEXT(ppc_md.hpte_remove),
+ ppc_function_entry(ppc_md.hpte_remove),
BRANCH_SET_LINK);
patch_branch(htab_call_hpte_updatepp,
- FUNCTION_TEXT(ppc_md.hpte_updatepp),
+ ppc_function_entry(ppc_md.hpte_updatepp),
BRANCH_SET_LINK);
}
@@ -964,6 +979,22 @@ void hash_failure_debug(unsigned long ea, unsigned long access,
trap, vsid, ssize, psize, lpsize, pte);
}
+static void check_paca_psize(unsigned long ea, struct mm_struct *mm,
+ int psize, bool user_region)
+{
+ if (user_region) {
+ if (psize != get_paca_psize(ea)) {
+ get_paca()->context = mm->context;
+ slb_flush_and_rebolt();
+ }
+ } else if (get_paca()->vmalloc_sllp !=
+ mmu_psize_defs[mmu_vmalloc_psize].sllp) {
+ get_paca()->vmalloc_sllp =
+ mmu_psize_defs[mmu_vmalloc_psize].sllp;
+ slb_vmalloc_update();
+ }
+}
+
/* Result code is:
* 0 - handled
* 1 - normal page fault
@@ -1085,6 +1116,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
WARN_ON(1);
}
#endif
+ check_paca_psize(ea, mm, psize, user_region);
+
goto bail;
}
@@ -1125,17 +1158,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
#endif
}
}
- if (user_region) {
- if (psize != get_paca_psize(ea)) {
- get_paca()->context = mm->context;
- slb_flush_and_rebolt();
- }
- } else if (get_paca()->vmalloc_sllp !=
- mmu_psize_defs[mmu_vmalloc_psize].sllp) {
- get_paca()->vmalloc_sllp =
- mmu_psize_defs[mmu_vmalloc_psize].sllp;
- slb_vmalloc_update();
- }
+
+ check_paca_psize(ea, mm, psize, user_region);
#endif /* CONFIG_PPC_64K_PAGES */
#ifdef CONFIG_PPC_HAS_HASH_64K
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 964a5f61488a1a7e726e2e68e10cc8446e0fcb62..0399a6702958dd933f8581cf8b75cfe16a184bb3 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -256,10 +256,14 @@ static inline void patch_slb_encoding(unsigned int *insn_addr,
patch_instruction(insn_addr, insn);
}
+extern u32 slb_compare_rr_to_size[];
+extern u32 slb_miss_kernel_load_linear[];
+extern u32 slb_miss_kernel_load_io[];
+extern u32 slb_compare_rr_to_size[];
+extern u32 slb_miss_kernel_load_vmemmap[];
+
void slb_set_size(u16 size)
{
- extern unsigned int *slb_compare_rr_to_size;
-
if (mmu_slb_size == size)
return;
@@ -272,11 +276,7 @@ void slb_initialize(void)
unsigned long linear_llp, vmalloc_llp, io_llp;
unsigned long lflags, vflags;
static int slb_encoding_inited;
- extern unsigned int *slb_miss_kernel_load_linear;
- extern unsigned int *slb_miss_kernel_load_io;
- extern unsigned int *slb_compare_rr_to_size;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
- extern unsigned int *slb_miss_kernel_load_vmemmap;
unsigned long vmemmap_llp;
#endif
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 17aa6dfceb3498cbb0a09302485bdf1ab8049cbf..736d18b3cefd3bd16e2d9ab7c34b56bb7f5e8a61 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -35,7 +35,7 @@ _GLOBAL(slb_allocate_realmode)
* check for bad kernel/user address
* (ea & ~REGION_MASK) >= PGTABLE_RANGE
*/
- rldicr. r9,r3,4,(63 - 46 - 4)
+ rldicr. r9,r3,4,(63 - PGTABLE_EADDR_SIZE - 4)
bne- 8f
srdi r9,r3,60 /* get region */
@@ -59,7 +59,8 @@ _GLOBAL(slb_allocate_realmode)
/* Linear mapping encoding bits, the "li" instruction below will
* be patched by the kernel at boot
*/
-_GLOBAL(slb_miss_kernel_load_linear)
+.globl slb_miss_kernel_load_linear
+slb_miss_kernel_load_linear:
li r11,0
/*
* context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
@@ -79,7 +80,8 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
/* Check virtual memmap region. To be patches at kernel boot */
cmpldi cr0,r9,0xf
bne 1f
-_GLOBAL(slb_miss_kernel_load_vmemmap)
+.globl slb_miss_kernel_load_vmemmap
+slb_miss_kernel_load_vmemmap:
li r11,0
b 6f
1:
@@ -95,7 +97,8 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
b 6f
5:
/* IO mapping */
- _GLOBAL(slb_miss_kernel_load_io)
+.globl slb_miss_kernel_load_io
+slb_miss_kernel_load_io:
li r11,0
6:
/*
@@ -250,7 +253,8 @@ slb_finish_load:
7: ld r10,PACASTABRR(r13)
addi r10,r10,1
/* This gets soft patched on boot. */
-_GLOBAL(slb_compare_rr_to_size)
+.globl slb_compare_rr_to_size
+slb_compare_rr_to_size:
cmpldi r10,0
blt+ 4f
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index ae3d5b799b9004f3089176c90a22b4dd8e76c84a..92cb18d52ea8d147ed1201d56eec2d776e28e978 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -596,8 +596,13 @@ static void __early_init_mmu(int boot_cpu)
/* XXX This should be decided at runtime based on supported
* page sizes in the TLB, but for now let's assume 16M is
* always there and a good fit (which it probably is)
+ *
+ * Freescale booke only supports 4K pages in TLB0, so use that.
*/
- mmu_vmemmap_psize = MMU_PAGE_16M;
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
+ mmu_vmemmap_psize = MMU_PAGE_4K;
+ else
+ mmu_vmemmap_psize = MMU_PAGE_16M;
/* XXX This code only checks for TLB 0 capabilities and doesn't
* check what page size combos are supported by the HW. It
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index dc1a264ec6e6da888eb45955c8360e2f816a3a90..4d88f6a19058cc253dcd885eec86e077f7441295 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -199,6 +199,34 @@ config CURRITUCK
help
This option enables support for the IBM Currituck (476fpe) evaluation board
+config AKEBONO
+ bool "IBM Akebono (476gtr) Support"
+ depends on PPC_47x
+ default n
+ select SWIOTLB
+ select 476FPE
+ select PPC4xx_PCI_EXPRESS
+ select PCI_MSI
+ select PPC4xx_HSTA_MSI
+ select I2C
+ select I2C_IBM_IIC
+ select NETDEVICES
+ select ETHERNET
+ select NET_VENDOR_IBM
+ select IBM_EMAC_EMAC4
+ select IBM_EMAC_RGMII_WOL
+ select USB
+ select USB_OHCI_HCD_PLATFORM
+ select USB_EHCI_HCD_PLATFORM
+ select MMC_SDHCI
+ select MMC_SDHCI_PLTFM
+ select MMC_SDHCI_OF_476GTR
+ select ATA
+ select SATA_AHCI_PLATFORM
+ help
+ This option enables support for the IBM Akebono (476gtr) evaluation board
+
+
config ICON
bool "Icon"
depends on 44x
@@ -323,6 +351,20 @@ config APM821xx
select IBM_EMAC_EMAC4
select IBM_EMAC_TAH
+config 476FPE_ERR46
+ depends on 476FPE
+ bool "Enable linker work around for PPC476FPE errata #46"
+ help
+ This option enables a work around for an icache bug on 476
+ that can cause execution of stale instructions when falling
+ through pages (IBM errata #46). It requires a recent version
+ of binutils which supports the --ppc476-workaround option.
+
+ The work around enables the appropriate linker options and
+ ensures that all module output sections are aligned to 4K
+ page boundaries. The work around is only required when
+ building modules.
+
# 44x errata/workaround config symbols, selected by the CPU models above
config IBM440EP_ERR42
bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index d03833abec092938ea15ea398e6e6536623f376c..26d35b5941f7988c91507a3c1e944d1840f0a436 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx) += iss4xx.o
obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
-obj-$(CONFIG_CURRITUCK) += currituck.o
+obj-$(CONFIG_CURRITUCK) += ppc476.o
+obj-$(CONFIG_AKEBONO) += ppc476.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/ppc476.c
similarity index 72%
rename from arch/powerpc/platforms/44x/currituck.c
rename to arch/powerpc/platforms/44x/ppc476.c
index 7f1b71a01c6a4e936da38573b72654e6e6ef6163..33986c1a05da2eaa6e1722dac53de62a2586f304 100644
--- a/arch/powerpc/platforms/44x/currituck.c
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -1,7 +1,8 @@
/*
- * Currituck board specific routines
+ * PowerPC 476FPE board specific routines
*
- * Copyright © 2011 Tony Breeds IBM Corporation
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
*
* Based on earlier code:
* Matt Porter <mporter@kernel.crashing.org>
@@ -35,8 +36,9 @@
#include <asm/mmu.h>
#include <linux/pci.h>
+#include <linux/i2c.h>
-static __initdata struct of_device_id ppc47x_of_bus[] = {
+static struct of_device_id ppc47x_of_bus[] __initdata = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,plb6", },
{ .compatible = "ibm,opb", },
@@ -55,15 +57,69 @@ static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+/* Akebono has an AVR microcontroller attached to the I2C bus
+ * which is used to power off/reset the system. */
+
+/* AVR I2C Commands */
+#define AVR_PWRCTL_CMD (0x26)
+
+/* Flags for the power control I2C commands */
+#define AVR_PWRCTL_PWROFF (0x01)
+#define AVR_PWRCTL_RESET (0x02)
+
+static struct i2c_client *avr_i2c_client;
+static void avr_halt_system(int pwrctl_flags)
+{
+ /* Request the AVR to reset the system */
+ i2c_smbus_write_byte_data(avr_i2c_client,
+ AVR_PWRCTL_CMD, pwrctl_flags);
+
+ /* Wait for system to be reset */
+ while (1)
+ ;
+}
+
+static void avr_power_off_system(void)
+{
+ avr_halt_system(AVR_PWRCTL_PWROFF);
+}
+
+static void avr_reset_system(char *cmd)
+{
+ avr_halt_system(AVR_PWRCTL_RESET);
+}
+
+static int avr_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ avr_i2c_client = client;
+ ppc_md.restart = avr_reset_system;
+ ppc_md.power_off = avr_power_off_system;
+ return 0;
+}
+
+static const struct i2c_device_id avr_id[] = {
+ { "akebono-avr", 0 },
+ { }
+};
+
+static struct i2c_driver avr_driver = {
+ .driver = {
+ .name = "akebono-avr",
+ },
+ .probe = avr_probe,
+ .id_table = avr_id,
+};
+
static int __init ppc47x_device_probe(void)
{
+ i2c_add_driver(&avr_driver);
of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
return 0;
}
machine_device_initcall(ppc47x, ppc47x_device_probe);
-/* We can have either UICs or MPICs */
static void __init ppc47x_init_irq(void)
{
struct device_node *np;
@@ -157,43 +213,36 @@ static void __init ppc47x_setup_arch(void)
{
/* No need to check the DMA config as we /know/ our windows are all of
- * RAM. Lets hope that doesn't change */
+ * RAM. Lets hope that doesn't change */
swiotlb_detect_4g();
ppc47x_smp_init();
}
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init ppc47x_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
- return 0;
-
- return 1;
-}
-
static int board_rev = -1;
static int __init ppc47x_get_board_rev(void)
{
- u8 fpga_reg0;
- void *fpga;
- struct device_node *np;
+ int reg;
+ u8 *fpga;
+ struct device_node *np = NULL;
+
+ if (of_machine_is_compatible("ibm,currituck")) {
+ np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
+ reg = 0;
+ } else if (of_machine_is_compatible("ibm,akebono")) {
+ np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga");
+ reg = 2;
+ }
- np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
if (!np)
goto fail;
- fpga = of_iomap(np, 0);
+ fpga = (u8 *) of_iomap(np, 0);
of_node_put(np);
if (!fpga)
goto fail;
- fpga_reg0 = ioread8(fpga);
- board_rev = fpga_reg0 & 0x03;
+ board_rev = ioread8(fpga + reg) & 0x03;
pr_info("%s: Found board revision %d\n", __func__, board_rev);
iounmap(fpga);
return 0;
@@ -208,7 +257,7 @@ machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
{
if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
- dev->device == 0x00e0)) {
+ dev->device == 0x00e0)) {
if (board_rev == 0) {
dev->irq = irq_create_mapping(NULL, 47);
pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
@@ -221,13 +270,30 @@ static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
}
}
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "ibm,akebono"))
+ return 1;
+
+ if (of_flat_dt_is_compatible(root, "ibm,currituck")) {
+ ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup;
+ return 1;
+ }
+
+ return 0;
+}
+
define_machine(ppc47x) {
.name = "PowerPC 47x",
.probe = ppc47x_probe,
.progress = udbg_progress,
.init_IRQ = ppc47x_init_irq,
.setup_arch = ppc47x_setup_arch,
- .pci_irq_fixup = ppc47x_pci_irq_fixup,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/ppc476_modules.lds b/arch/powerpc/platforms/44x/ppc476_modules.lds
new file mode 100644
index 0000000000000000000000000000000000000000..9fec5d34ba8efd3750ed9a57b90f29a2411ad37b
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc476_modules.lds
@@ -0,0 +1,15 @@
+SECTIONS
+{
+ .text : ALIGN(4096)
+ {
+ *(.text .text.* .fixup)
+ }
+ .init.text : ALIGN(4096)
+ {
+ *(.init.text .init.text.*)
+ }
+ .exit.text : ALIGN(4096)
+ {
+ *(.exit.text .exit.text.*)
+ }
+}
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index c17aae80e7ffd73d4860a64a42bee8b686fb4b62..f442120e0033d0767473356909a92e8dfe8df0a5 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -38,6 +38,15 @@ config C293_PCIE
help
This option enables support for the C293PCIE board
+config BSC9132_QDS
+ bool "Freescale BSC9132QDS"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Freescale BSC9132 QDS board.
+ BSC9132 is a heterogeneous SoC containing dual e500v2 powerpc cores
+ and dual StarCore SC3850 DSP cores.
+ Manufacturer : Freescale Semiconductor, Inc
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
@@ -117,11 +126,11 @@ config P1022_RDK
This option enables support for the Freescale / iVeia P1022RDK
reference board.
-config P1023_RDS
- bool "Freescale P1023 RDS/RDB"
+config P1023_RDB
+ bool "Freescale P1023 RDB"
select DEFAULT_UIMAGE
help
- This option enables support for the P1023 RDS and RDB boards
+ This option enables support for the P1023 RDB board.
config TWR_P102x
bool "Freescale TWR-P102x"
@@ -263,11 +272,11 @@ config CORENET_GENERIC
help
This option enables support for the FSL CoreNet based boards.
For 32bit kernel, the following boards are supported:
- P2041 RDB, P3041 DS and P4080 DS
+ P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080
For 64bit kernel, the following boards are supported:
T4240 QDS and B4 QDS
The following boards are supported for both 32bit and 64bit kernel:
- P5020 DS and P5040 DS
+ P5020 DS, P5040 DS and T104xQDS
endif # FSL_SOC_BOOKE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 25cebe74ac463365b7d5a4d7e89aea8088a818a4..7303260466255605ec7bc6f4e1ebcad9ba8f29ec 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-y += common.o
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
obj-$(CONFIG_C293_PCIE) += c293pcie.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
@@ -17,7 +18,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_P1010_RDB) += p1010rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
-obj-$(CONFIG_P1023_RDS) += p1023_rds.o
+obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c
new file mode 100644
index 0000000000000000000000000000000000000000..f0927e58af2579aa9adf082cf7912b23933887f4
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c
@@ -0,0 +1,74 @@
+/*
+ * BSC913xQDS Board Setup
+ *
+ * Author:
+ * Harninder Rai <harninder.rai@freescale.com>
+ * Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+#include "smp.h"
+
+void __init bsc913x_qds_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ if (!mpic)
+ pr_err("bsc913x: Failed to allocate MPIC structure\n");
+ else
+ mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_qds_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("bsc913x_qds_setup_arch()", 0);
+
+#if defined(CONFIG_SMP)
+ mpc85xx_smp_init();
+#endif
+
+ pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9132_qds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,bsc9132qds");
+}
+
+define_machine(bsc9132_qds) {
+ .name = "BSC9132 QDS",
+ .probe = bsc9132_qds_probe,
+ .setup_arch = bsc913x_qds_setup_arch,
+ .init_IRQ = bsc913x_qds_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 8e4b1e1a49113cb17b6bf394d743a57bce9e9113..5db1e117fddefd3291c3a8d129bf3ae001bdfed0 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -67,7 +67,7 @@ void __init corenet_gen_setup_arch(void)
swiotlb_detect_4g();
- pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+ pr_info("%s board\n", ppc_md.name);
mpc85xx_qe_init();
}
@@ -115,6 +115,7 @@ int __init corenet_gen_publish_devices(void)
static const char * const boards[] __initconst = {
"fsl,P2041RDB",
"fsl,P3041DS",
+ "fsl,OCA4080",
"fsl,P4080DS",
"fsl,P5020DS",
"fsl,P5040DS",
@@ -122,12 +123,16 @@ static const char * const boards[] __initconst = {
"fsl,B4860QDS",
"fsl,B4420QDS",
"fsl,B4220QDS",
+ "fsl,T1040QDS",
+ "fsl,T1042QDS",
+ "keymile,kmcoge4",
NULL
};
static const char * const hv_boards[] __initconst = {
"fsl,P2041RDB-hv",
"fsl,P3041DS-hv",
+ "fsl,OCA4080-hv",
"fsl,P4080DS-hv",
"fsl,P5020DS-hv",
"fsl,P5040DS-hv",
@@ -135,6 +140,8 @@ static const char * const hv_boards[] __initconst = {
"fsl,B4860QDS-hv",
"fsl,B4420QDS-hv",
"fsl,B4220QDS-hv",
+ "fsl,T1040QDS-hv",
+ "fsl,T1042QDS-hv",
NULL
};
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rdb.c
similarity index 75%
rename from arch/powerpc/platforms/85xx/p1023_rds.c
rename to arch/powerpc/platforms/85xx/p1023_rdb.c
index 0e614007acfb36e7f6fdad6fb139dc2f0ff5e96b..d5b7509825de4bfd9418576699a17e6a76116171 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rdb.c
@@ -4,7 +4,7 @@
* Author: Roy Zang <tie-fei.zang@freescale.com>
*
* Description:
- * P1023 RDS Board Setup
+ * P1023 RDB Board Setup
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -41,12 +41,12 @@
* Setup the architecture
*
*/
-static void __init mpc85xx_rds_setup_arch(void)
+static void __init mpc85xx_rdb_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
- ppc_md.progress("p1023_rds_setup_arch()", 0);
+ ppc_md.progress("p1023_rdb_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
@@ -85,10 +85,9 @@ static void __init mpc85xx_rds_setup_arch(void)
fsl_pci_assign_primary();
}
-machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
-static void __init mpc85xx_rds_pic_init(void)
+static void __init mpc85xx_rdb_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
@@ -99,14 +98,6 @@ static void __init mpc85xx_rds_pic_init(void)
mpic_init(mpic);
}
-static int __init p1023_rds_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- return of_flat_dt_is_compatible(root, "fsl,P1023RDS");
-
-}
-
static int __init p1023_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
@@ -115,26 +106,11 @@ static int __init p1023_rdb_probe(void)
}
-define_machine(p1023_rds) {
- .name = "P1023 RDS",
- .probe = p1023_rds_probe,
- .setup_arch = mpc85xx_rds_setup_arch,
- .init_IRQ = mpc85xx_rds_pic_init,
- .get_irq = mpic_get_irq,
- .restart = fsl_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
- .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
-#endif
-};
-
define_machine(p1023_rdb) {
.name = "P1023 RDB",
.probe = p1023_rdb_probe,
- .setup_arch = mpc85xx_rds_setup_arch,
- .init_IRQ = mpc85xx_rds_pic_init,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6382098d6f8d884aeea1fbbef387df8572f0b5b9..ba093f55367894bd79129e412e96550d02cae428 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
#include <asm/cacheflush.h>
#include <asm/dbell.h>
#include <asm/fsl_guts.h>
+#include <asm/code-patching.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
@@ -267,7 +268,7 @@ out:
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be64((u64 *)(&spin_table->addr_h),
- __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
+ __pa(ppc_function_entry(generic_secondary_smp_init)));
flush_spin_table(spin_table);
#endif
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index d9e2b19b7c8deb16b344670c50174032d494176d..43b65ad1970a1a8635e7c517b7cfb95d211bcf84 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -422,6 +422,7 @@ config CPU_BIG_ENDIAN
config CPU_LITTLE_ENDIAN
bool "Build little endian kernel"
+ select PPC64_BOOT_WRAPPER
help
Build a little endian kernel.
@@ -430,3 +431,7 @@ config CPU_LITTLE_ENDIAN
little endian powerpc.
endchoice
+
+config PPC64_BOOT_WRAPPER
+ def_bool n
+ depends on CPU_LITTLE_ENDIAN
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 90745eaa45fe9551b71c2479fc1ce8060f8abd0c..c8017a7bcabd2b9e44b669357da5fc6eb9c0c090 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -40,6 +40,7 @@
#include <asm/firmware.h>
#include <asm/rtas.h>
#include <asm/cputhreads.h>
+#include <asm/code-patching.h>
#include "interrupt.h"
#include <asm/udbg.h>
@@ -70,8 +71,8 @@ static cpumask_t of_spin_map;
static inline int smp_startup_cpu(unsigned int lcpu)
{
int status;
- unsigned long start_here = __pa((u32)*((unsigned long *)
- generic_secondary_smp_init));
+ unsigned long start_here =
+ __pa(ppc_function_entry(generic_secondary_smp_init));
unsigned int pcpu;
int start_cpu;
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 2a7024d8d8b1333f646bce95738d83b6e9ba0999..a25f496c2ef9065b98547423031b953c95597eff 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -65,6 +65,7 @@ config MVME5100
select PPC_INDIRECT_PCI
select PPC_I8259
select PPC_NATIVE
+ select PPC_UDBG_16550
help
This option enables support for the Motorola (now Emerson) MVME5100
board.
diff --git a/arch/powerpc/platforms/pasemi/powersave.S b/arch/powerpc/platforms/pasemi/powersave.S
index 56f45adcd0895aceb35f7be4ef800b2c39e60b77..81ab555aa491ed118291d150f2dfaba82a1f4f03 100644
--- a/arch/powerpc/platforms/pasemi/powersave.S
+++ b/arch/powerpc/platforms/pasemi/powersave.S
@@ -66,7 +66,7 @@ sleep_common:
std r3, 48(r1)
/* Only do power savings when in astate 0 */
- bl .check_astate
+ bl check_astate
cmpwi r3,0
bne 1f
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 63cebb9b4d452e4b37a8ed1e4db606c14e6c84a6..4ad0d345bc960eeec309848c4edc0e2fa23e6970 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,7 +1,7 @@
obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
-obj-y += opal-msglog.o
+obj-y += opal-msglog.o subcore.o subcore-asm.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 5b51079f3e3ba52f7ecb51c3fb27a5d7255ebb48..753f08e36dfaa8d4cfa7884b9f27480899abbca7 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -42,11 +42,19 @@ static int ioda_eeh_event(struct notifier_block *nb,
{
uint64_t changed_evts = (uint64_t)change;
- /* We simply send special EEH event */
- if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
- (events & OPAL_EVENT_PCI_ERROR) &&
- eeh_enabled())
+ /*
+ * We simply send special EEH event if EEH has
+ * been enabled, or clear pending events in
+ * case that we enable EEH soon
+ */
+ if (!(changed_evts & OPAL_EVENT_PCI_ERROR) ||
+ !(events & OPAL_EVENT_PCI_ERROR))
+ return 0;
+
+ if (eeh_enabled())
eeh_send_failure_event(NULL);
+ else
+ opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
return 0;
}
@@ -141,7 +149,9 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
}
#ifdef CONFIG_DEBUG_FS
- if (phb->dbgfs) {
+ if (!phb->has_dbgfs && phb->dbgfs) {
+ phb->has_dbgfs = 1;
+
debugfs_create_file("err_injct_outbound", 0600,
phb->dbgfs, hose,
&ioda_eeh_outb_dbgfs_ops);
@@ -154,7 +164,14 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
}
#endif
- phb->eeh_state |= PNV_EEH_STATE_ENABLED;
+ /* If EEH is enabled, we're going to rely on that.
+ * Otherwise, we restore to conventional mechanism
+ * to clear frozen PE during PCI config access.
+ */
+ if (eeh_enabled())
+ phb->flags |= PNV_PHB_FLAG_EEH;
+ else
+ phb->flags &= ~PNV_PHB_FLAG_EEH;
return 0;
}
@@ -268,6 +285,21 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
return EEH_STATE_NOT_SUPPORT;
}
+ /*
+ * If we're in middle of PE reset, return normal
+ * state to keep EEH core going. For PHB reset, we
+ * still expect to have fenced PHB cleared with
+ * PHB reset.
+ */
+ if (!(pe->type & EEH_PE_PHB) &&
+ (pe->state & EEH_PE_RESET)) {
+ result = (EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_DMA_ACTIVE |
+ EEH_STATE_MMIO_ENABLED |
+ EEH_STATE_DMA_ENABLED);
+ return result;
+ }
+
/* Retrieve PE status through OPAL */
pe_no = pe->addr;
ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
@@ -347,52 +379,6 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
return result;
}
-static int ioda_eeh_pe_clear(struct eeh_pe *pe)
-{
- struct pci_controller *hose;
- struct pnv_phb *phb;
- u32 pe_no;
- u8 fstate;
- u16 pcierr;
- s64 ret;
-
- pe_no = pe->addr;
- hose = pe->phb;
- phb = pe->phb->private_data;
-
- /* Clear the EEH error on the PE */
- ret = opal_pci_eeh_freeze_clear(phb->opal_id,
- pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
- if (ret) {
- pr_err("%s: Failed to clear EEH error for "
- "PHB#%x-PE#%x, err=%lld\n",
- __func__, hose->global_number, pe_no, ret);
- return -EIO;
- }
-
- /*
- * Read the PE state back and verify that the frozen
- * state has been removed.
- */
- ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
- &fstate, &pcierr, NULL);
- if (ret) {
- pr_err("%s: Failed to get EEH status on "
- "PHB#%x-PE#%x\n, err=%lld\n",
- __func__, hose->global_number, pe_no, ret);
- return -EIO;
- }
-
- if (fstate != OPAL_EEH_STOPPED_NOT_FROZEN) {
- pr_err("%s: Frozen state not cleared on "
- "PHB#%x-PE#%x, sts=%x\n",
- __func__, hose->global_number, pe_no, fstate);
- return -EIO;
- }
-
- return 0;
-}
-
static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
{
s64 rc = OPAL_HARDWARE;
@@ -402,13 +388,16 @@ static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
if (rc <= 0)
break;
- msleep(rc);
+ if (system_state < SYSTEM_RUNNING)
+ udelay(1000 * rc);
+ else
+ msleep(rc);
}
return rc;
}
-static int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
+int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
{
struct pnv_phb *phb = hose->private_data;
s64 rc = OPAL_HARDWARE;
@@ -431,9 +420,17 @@ static int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
/*
* Poll state of the PHB until the request is done
- * successfully.
+ * successfully. The PHB reset is usually PHB complete
+ * reset followed by hot reset on root bus. So we also
+ * need the PCI bus settlement delay.
*/
rc = ioda_eeh_phb_poll(phb);
+ if (option == EEH_RESET_DEACTIVATE) {
+ if (system_state < SYSTEM_RUNNING)
+ udelay(1000 * EEH_PE_RST_SETTLE_TIME);
+ else
+ msleep(EEH_PE_RST_SETTLE_TIME);
+ }
out:
if (rc != OPAL_SUCCESS)
return -EIO;
@@ -471,6 +468,8 @@ static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
/* Poll state of the PHB until the request is done */
rc = ioda_eeh_phb_poll(phb);
+ if (option == EEH_RESET_DEACTIVATE)
+ msleep(EEH_PE_RST_SETTLE_TIME);
out:
if (rc != OPAL_SUCCESS)
return -EIO;
@@ -478,32 +477,71 @@ out:
return 0;
}
-static int ioda_eeh_bridge_reset(struct pci_controller *hose,
- struct pci_dev *dev, int option)
+static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option)
+
{
- u16 ctrl;
+ struct device_node *dn = pci_device_to_OF_node(dev);
+ struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+ int aer = edev ? edev->aer_cap : 0;
+ u32 ctrl;
- pr_debug("%s: Reset device %04x:%02x:%02x.%01x with option %d\n",
- __func__, hose->global_number, dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), option);
+ pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
+ __func__, pci_domain_nr(dev->bus),
+ dev->bus->number, option);
switch (option) {
case EEH_RESET_FUNDAMENTAL:
case EEH_RESET_HOT:
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+ /* Don't report linkDown event */
+ if (aer) {
+ eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
+ 4, &ctrl);
+ ctrl |= PCI_ERR_UNC_SURPDN;
+ eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
+ 4, ctrl);
+ }
+
+ eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+ eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
+ msleep(EEH_PE_RST_HOLD_TIME);
+
break;
case EEH_RESET_DEACTIVATE:
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+ eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+ eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
+ msleep(EEH_PE_RST_SETTLE_TIME);
+
+ /* Continue reporting linkDown event */
+ if (aer) {
+ eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
+ 4, &ctrl);
+ ctrl &= ~PCI_ERR_UNC_SURPDN;
+ eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
+ 4, ctrl);
+ }
+
break;
}
return 0;
}
+void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+
+ if (pci_is_root_bus(dev->bus)) {
+ hose = pci_bus_to_host(dev->bus);
+ ioda_eeh_root_reset(hose, EEH_RESET_HOT);
+ ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+ } else {
+ ioda_eeh_bridge_reset(dev, EEH_RESET_HOT);
+ ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
+ }
+}
+
/**
* ioda_eeh_reset - Reset the indicated PE
* @pe: EEH PE
@@ -523,27 +561,18 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
int ret;
/*
- * Anyway, we have to clear the problematic state for the
- * corresponding PE. However, we needn't do it if the PE
- * is PHB associated. That means the PHB is having fatal
- * errors and it needs reset. Further more, the AIB interface
- * isn't reliable any more.
- */
- if (!(pe->type & EEH_PE_PHB) &&
- (option == EEH_RESET_HOT ||
- option == EEH_RESET_FUNDAMENTAL)) {
- ret = ioda_eeh_pe_clear(pe);
- if (ret)
- return -EIO;
- }
-
- /*
- * The rules applied to reset, either fundamental or hot reset:
+ * For PHB reset, we always have complete reset. For those PEs whose
+ * primary bus derived from root complex (root bus) or root port
+ * (usually bus#1), we apply hot or fundamental reset on the root port.
+ * For other PEs, we always have hot reset on the PE primary bus.
*
- * We always reset the direct upstream bridge of the PE. If the
- * direct upstream bridge isn't root bridge, we always take hot
- * reset no matter what option (fundamental or hot) is. Otherwise,
- * we should do the reset according to the required option.
+ * Here, we have different design to pHyp, which always clear the
+ * frozen state during PE reset. However, the good idea here from
+ * benh is to keep frozen state before we get PE reset done completely
+ * (until BAR restore). With the frozen state, HW drops illegal IO
+ * or MMIO access, which can incur recrusive frozen PE during PE
+ * reset. The side effect is that EEH core has to clear the frozen
+ * state explicitly after BAR restore.
*/
if (pe->type & EEH_PE_PHB) {
ret = ioda_eeh_phb_reset(hose, option);
@@ -553,7 +582,7 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
pci_is_root_bus(bus->parent))
ret = ioda_eeh_root_reset(hose, option);
else
- ret = ioda_eeh_bridge_reset(hose, bus->self, option);
+ ret = ioda_eeh_bridge_reset(bus->self, option);
}
return ret;
@@ -640,22 +669,6 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose)
}
}
-static int ioda_eeh_get_phb_pe(struct pci_controller *hose,
- struct eeh_pe **pe)
-{
- struct eeh_pe *phb_pe;
-
- phb_pe = eeh_phb_pe_get(hose);
- if (!phb_pe) {
- pr_warning("%s Can't find PE for PHB#%d\n",
- __func__, hose->global_number);
- return -EEXIST;
- }
-
- *pe = phb_pe;
- return 0;
-}
-
static int ioda_eeh_get_pe(struct pci_controller *hose,
u16 pe_no, struct eeh_pe **pe)
{
@@ -663,7 +676,8 @@ static int ioda_eeh_get_pe(struct pci_controller *hose,
struct eeh_dev dev;
/* Find the PHB PE */
- if (ioda_eeh_get_phb_pe(hose, &phb_pe))
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe)
return -EEXIST;
/* Find the PE according to PE# */
@@ -691,6 +705,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
{
struct pci_controller *hose;
struct pnv_phb *phb;
+ struct eeh_pe *phb_pe;
u64 frozen_pe_no;
u16 err_type, severity;
long rc;
@@ -707,10 +722,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
list_for_each_entry(hose, &hose_list, list_node) {
/*
* If the subordinate PCI buses of the PHB has been
- * removed, we needn't take care of it any more.
+ * removed or is exactly under error recovery, we
+ * needn't take care of it any more.
*/
phb = hose->private_data;
- if (phb->eeh_state & PNV_EEH_STATE_REMOVED)
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
continue;
rc = opal_pci_next_error(phb->opal_id,
@@ -743,12 +760,6 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
switch (err_type) {
case OPAL_EEH_IOC_ERROR:
if (severity == OPAL_EEH_SEV_IOC_DEAD) {
- list_for_each_entry(hose, &hose_list,
- list_node) {
- phb = hose->private_data;
- phb->eeh_state |= PNV_EEH_STATE_REMOVED;
- }
-
pr_err("EEH: dead IOC detected\n");
ret = EEH_NEXT_ERR_DEAD_IOC;
} else if (severity == OPAL_EEH_SEV_INF) {
@@ -761,17 +772,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
break;
case OPAL_EEH_PHB_ERROR:
if (severity == OPAL_EEH_SEV_PHB_DEAD) {
- if (ioda_eeh_get_phb_pe(hose, pe))
- break;
-
+ *pe = phb_pe;
pr_err("EEH: dead PHB#%x detected\n",
hose->global_number);
- phb->eeh_state |= PNV_EEH_STATE_REMOVED;
ret = EEH_NEXT_ERR_DEAD_PHB;
} else if (severity == OPAL_EEH_SEV_PHB_FENCED) {
- if (ioda_eeh_get_phb_pe(hose, pe))
- break;
-
+ *pe = phb_pe;
pr_err("EEH: fenced PHB#%x detected\n",
hose->global_number);
ret = EEH_NEXT_ERR_FENCED_PHB;
@@ -789,17 +795,21 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
* If we can't find the corresponding PE, the
* PEEV / PEST would be messy. So we force an
* fenced PHB so that it can be recovered.
+ *
+ * If the PE has been marked as isolated, that
+ * should have been removed permanently or in
+ * progress with recovery. We needn't report
+ * it again.
*/
if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) {
- if (!ioda_eeh_get_phb_pe(hose, pe)) {
- pr_err("EEH: Escalated fenced PHB#%x "
- "detected for PE#%llx\n",
- hose->global_number,
- frozen_pe_no);
- ret = EEH_NEXT_ERR_FENCED_PHB;
- } else {
- ret = EEH_NEXT_ERR_NONE;
- }
+ *pe = phb_pe;
+ pr_err("EEH: Escalated fenced PHB#%x "
+ "detected for PE#%llx\n",
+ hose->global_number,
+ frozen_pe_no);
+ ret = EEH_NEXT_ERR_FENCED_PHB;
+ } else if ((*pe)->state & EEH_PE_ISOLATED) {
+ ret = EEH_NEXT_ERR_NONE;
} else {
pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
(*pe)->addr, (*pe)->phb->global_number);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index a59788e83b8b377152ed5d70db86fbb7bc9fb805..56a206f32f77e750dccb117691099ac0f850d6d1 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -126,6 +126,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
edev->mode &= 0xFFFFFF00;
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
edev->mode |= EEH_DEV_BRIDGE;
+ edev->pcix_cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (pci_is_pcie(dev)) {
edev->pcie_cap = pci_pcie_cap(dev);
@@ -133,6 +134,9 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
edev->mode |= EEH_DEV_ROOT_PORT;
else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
edev->mode |= EEH_DEV_DS_PORT;
+
+ edev->aer_cap = pci_find_ext_capability(dev,
+ PCI_EXT_CAP_ID_ERR);
}
edev->config_addr = ((dev->bus->number << 8) | dev->devfn);
diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c
index dc487ff0470401b0613b28958ff102dbcc5103e1..5c21d9c07f4539e3b56a534b4315c4f7ebbd78ca 100644
--- a/arch/powerpc/platforms/powernv/opal-flash.c
+++ b/arch/powerpc/platforms/powernv/opal-flash.c
@@ -20,6 +20,7 @@
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
+#include <linux/delay.h>
#include <asm/opal.h>
@@ -130,7 +131,8 @@ static inline void opal_flash_validate(void)
{
long ret;
void *buf = validate_flash_data.buf;
- __be32 size, result;
+ __be32 size = cpu_to_be32(validate_flash_data.buf_size);
+ __be32 result;
ret = opal_validate_flash(__pa(buf), &size, &result);
@@ -290,11 +292,6 @@ static int opal_flash_update(int op)
/* First entry address */
addr = __pa(list);
- pr_alert("FLASH: Image is %u bytes\n", image_data.size);
- pr_alert("FLASH: Image update requested\n");
- pr_alert("FLASH: Image will be updated during system reboot\n");
- pr_alert("FLASH: This will take several minutes. Do not power off!\n");
-
flash:
rc = opal_update_flash(addr);
@@ -302,6 +299,47 @@ invalid_img:
return rc;
}
+/* Return CPUs to OPAL before starting FW update */
+static void flash_return_cpu(void *info)
+{
+ int cpu = smp_processor_id();
+
+ if (!cpu_online(cpu))
+ return;
+
+ /* Disable IRQ */
+ hard_irq_disable();
+
+ /* Return the CPU to OPAL */
+ opal_return_cpu();
+}
+
+/* This gets called just before system reboots */
+void opal_flash_term_callback(void)
+{
+ struct cpumask mask;
+
+ if (update_flash_data.status != FLASH_IMG_READY)
+ return;
+
+ pr_alert("FLASH: Flashing new firmware\n");
+ pr_alert("FLASH: Image is %u bytes\n", image_data.size);
+ pr_alert("FLASH: Performing flash and reboot/shutdown\n");
+ pr_alert("FLASH: This will take several minutes. Do not power off!\n");
+
+ /* Small delay to help getting the above message out */
+ msleep(500);
+
+ /* Return secondary CPUs to firmware */
+ cpumask_copy(&mask, cpu_online_mask);
+ cpumask_clear_cpu(smp_processor_id(), &mask);
+ if (!cpumask_empty(&mask))
+ smp_call_function_many(&mask,
+ flash_return_cpu, NULL, false);
+ /* Hard disable interrupts */
+ hard_irq_disable();
+}
+
/*
* Show candidate image status
*/
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 79d83cad3d6709c543dad5bb96eafba2ff8756a7..f04b4d8aca5a998edd95d39e63889a1c0ecf1587 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -12,12 +12,17 @@
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
#include <asm/xics.h>
#include <asm/opal.h>
#include <asm/prom.h>
+#include <asm/uaccess.h>
+#include <asm/debug.h>
static int opal_lpc_chip_id = -1;
@@ -176,6 +181,152 @@ static const struct ppc_pci_io opal_lpc_io = {
.outsl = opal_lpc_outsl,
};
+#ifdef CONFIG_DEBUG_FS
+struct lpc_debugfs_entry {
+ enum OpalLPCAddressType lpc_type;
+};
+
+static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct lpc_debugfs_entry *lpc = filp->private_data;
+ u32 data, pos, len, todo;
+ int rc;
+
+ if (!access_ok(VERIFY_WRITE, ubuf, count))
+ return -EFAULT;
+
+ todo = count;
+ while (todo) {
+ pos = *ppos;
+
+ /*
+ * Select access size based on count and alignment and
+ * access type. IO and MEM only support byte acceses,
+ * FW supports all 3.
+ */
+ len = 1;
+ if (lpc->lpc_type == OPAL_LPC_FW) {
+ if (todo > 3 && (pos & 3) == 0)
+ len = 4;
+ else if (todo > 1 && (pos & 1) == 0)
+ len = 2;
+ }
+ rc = opal_lpc_read(opal_lpc_chip_id, lpc->lpc_type, pos,
+ &data, len);
+ if (rc)
+ return -ENXIO;
+ switch(len) {
+ case 4:
+ rc = __put_user((u32)data, (u32 __user *)ubuf);
+ break;
+ case 2:
+ rc = __put_user((u16)data, (u16 __user *)ubuf);
+ break;
+ default:
+ rc = __put_user((u8)data, (u8 __user *)ubuf);
+ break;
+ }
+ if (rc)
+ return -EFAULT;
+ *ppos += len;
+ ubuf += len;
+ todo -= len;
+ }
+
+ return count;
+}
+
+static ssize_t lpc_debug_write(struct file *filp, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct lpc_debugfs_entry *lpc = filp->private_data;
+ u32 data, pos, len, todo;
+ int rc;
+
+ if (!access_ok(VERIFY_READ, ubuf, count))
+ return -EFAULT;
+
+ todo = count;
+ while (todo) {
+ pos = *ppos;
+
+ /*
+ * Select access size based on count and alignment and
+ * access type. IO and MEM only support byte acceses,
+ * FW supports all 3.
+ */
+ len = 1;
+ if (lpc->lpc_type == OPAL_LPC_FW) {
+ if (todo > 3 && (pos & 3) == 0)
+ len = 4;
+ else if (todo > 1 && (pos & 1) == 0)
+ len = 2;
+ }
+ switch(len) {
+ case 4:
+ rc = __get_user(data, (u32 __user *)ubuf);
+ break;
+ case 2:
+ rc = __get_user(data, (u16 __user *)ubuf);
+ break;
+ default:
+ rc = __get_user(data, (u8 __user *)ubuf);
+ break;
+ }
+ if (rc)
+ return -EFAULT;
+
+ rc = opal_lpc_write(opal_lpc_chip_id, lpc->lpc_type, pos,
+ data, len);
+ if (rc)
+ return -ENXIO;
+ *ppos += len;
+ ubuf += len;
+ todo -= len;
+ }
+
+ return count;
+}
+
+static const struct file_operations lpc_fops = {
+ .read = lpc_debug_read,
+ .write = lpc_debug_write,
+ .open = simple_open,
+ .llseek = default_llseek,
+};
+
+static int opal_lpc_debugfs_create_type(struct dentry *folder,
+ const char *fname,
+ enum OpalLPCAddressType type)
+{
+ struct lpc_debugfs_entry *entry;
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+ entry->lpc_type = type;
+ debugfs_create_file(fname, 0600, folder, entry, &lpc_fops);
+ return 0;
+}
+
+static int opal_lpc_init_debugfs(void)
+{
+ struct dentry *root;
+ int rc = 0;
+
+ if (opal_lpc_chip_id < 0)
+ return -ENODEV;
+
+ root = debugfs_create_dir("lpc", powerpc_debugfs_root);
+
+ rc |= opal_lpc_debugfs_create_type(root, "io", OPAL_LPC_IO);
+ rc |= opal_lpc_debugfs_create_type(root, "mem", OPAL_LPC_MEM);
+ rc |= opal_lpc_debugfs_create_type(root, "fw", OPAL_LPC_FW);
+ return rc;
+}
+device_initcall(opal_lpc_init_debugfs);
+#endif /* CONFIG_DEBUG_FS */
+
void opal_lpc_init(void)
{
struct device_node *np;
diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c
index ec4132239cdf20e6d12f4469a825167b457e2f9f..b17a34b695ef86bc43fbbd3c145d66cb4b6ec493 100644
--- a/arch/powerpc/platforms/powernv/opal-memory-errors.c
+++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c
@@ -47,12 +47,12 @@ static void handle_memory_error_event(struct OpalMemoryErrorData *merr_evt)
__func__, merr_evt->type);
switch (merr_evt->type) {
case OPAL_MEM_ERR_TYPE_RESILIENCE:
- paddr_start = merr_evt->u.resilience.physical_address_start;
- paddr_end = merr_evt->u.resilience.physical_address_end;
+ paddr_start = be64_to_cpu(merr_evt->u.resilience.physical_address_start);
+ paddr_end = be64_to_cpu(merr_evt->u.resilience.physical_address_end);
break;
case OPAL_MEM_ERR_TYPE_DYN_DALLOC:
- paddr_start = merr_evt->u.dyn_dealloc.physical_address_start;
- paddr_end = merr_evt->u.dyn_dealloc.physical_address_end;
+ paddr_start = be64_to_cpu(merr_evt->u.dyn_dealloc.physical_address_start);
+ paddr_end = be64_to_cpu(merr_evt->u.dyn_dealloc.physical_address_end);
break;
default:
return;
diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S
index 3cd262897c272c5ee62f577bf4c9cef052f5a8c0..11a3169ee583635607a41406a7a571872cee97d9 100644
--- a/arch/powerpc/platforms/powernv/opal-takeover.S
+++ b/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -21,11 +21,13 @@
_GLOBAL(opal_query_takeover)
mfcr r0
stw r0,8(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
std r3,STK_PARAM(R3)(r1)
std r4,STK_PARAM(R4)(r1)
li r3,H_HAL_TAKEOVER
li r4,H_HAL_TAKEOVER_QUERY_MAGIC
HVSC
+ addi r1,r1,STACKFRAMESIZE
ld r10,STK_PARAM(R3)(r1)
std r4,0(r10)
ld r10,STK_PARAM(R4)(r1)
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index f531ffe35b3e052e870c5359619165e7bb5f0421..4abbff22a61f0a6165b3d475156c32bb633d6538 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -32,7 +32,7 @@
std r12,PACASAVEDMSR(r13); \
andc r12,r12,r0; \
mtmsrd r12,1; \
- LOAD_REG_ADDR(r0,.opal_return); \
+ LOAD_REG_ADDR(r0,opal_return); \
mtlr r0; \
li r0,MSR_DR|MSR_IR|MSR_LE;\
andc r12,r12,r0; \
@@ -44,7 +44,7 @@
mtspr SPRN_HSRR0,r12; \
hrfid
-_STATIC(opal_return)
+opal_return:
/*
* Fixup endian on OPAL return... we should be able to simplify
* this by instead converting the below trampoline to a set of
@@ -124,6 +124,7 @@ OPAL_CALL(opal_xscom_write, OPAL_XSCOM_WRITE);
OPAL_CALL(opal_lpc_read, OPAL_LPC_READ);
OPAL_CALL(opal_lpc_write, OPAL_LPC_WRITE);
OPAL_CALL(opal_return_cpu, OPAL_RETURN_CPU);
+OPAL_CALL(opal_reinit_cpus, OPAL_REINIT_CPUS);
OPAL_CALL(opal_read_elog, OPAL_ELOG_READ);
OPAL_CALL(opal_send_ack_elog, OPAL_ELOG_ACK);
OPAL_CALL(opal_get_elog_size, OPAL_ELOG_SIZE);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index f343183add07c189d02b0701e284f72effd614fc..199975613fe99fbbc030e34c205283dbb889f2c8 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -57,6 +57,21 @@ static DEFINE_SPINLOCK(opal_notifier_lock);
static uint64_t last_notified_mask = 0x0ul;
static atomic_t opal_notifier_hold = ATOMIC_INIT(0);
+static void opal_reinit_cores(void)
+{
+ /* Do the actual re-init, This will clobber all FPRs, VRs, etc...
+ *
+ * It will preserve non volatile GPRs and HSPRG0/1. It will
+ * also restore HIDs and other SPRs to their original value
+ * but it might clobber a bunch.
+ */
+#ifdef __BIG_ENDIAN__
+ opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE);
+#else
+ opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_LE);
+#endif
+}
+
int __init early_init_dt_scan_opal(unsigned long node,
const char *uname, int depth, void *data)
{
@@ -96,6 +111,13 @@ int __init early_init_dt_scan_opal(unsigned long node,
printk("OPAL V1 detected !\n");
}
+ /* Reinit all cores with the right endian */
+ opal_reinit_cores();
+
+ /* Restore some bits */
+ if (cur_cpu_spec->cpu_restore)
+ cur_cpu_spec->cpu_restore();
+
return 1;
}
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 98824aa991731882cca87f806f464198f356ff26..de19edeaa7a75f1e21dedd0babbf57727c6d4afb 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/crash_dump.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/string.h>
@@ -663,15 +664,15 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
* errors, and on the first pass the data will be a relative
* bus number, print that out instead.
*/
- tbl->it_busno = 0;
pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
8);
- tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
- TCE_PCI_SWINV_PAIR;
+ tbl->it_type |= (TCE_PCI_SWINV_CREATE |
+ TCE_PCI_SWINV_FREE |
+ TCE_PCI_SWINV_PAIR);
}
iommu_init_table(tbl, phb->hose->node);
- iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
+ iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
if (pe->pdev)
set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
@@ -793,14 +794,13 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
* errors, and on the first pass the data will be a relative
* bus number, print that out instead.
*/
- tbl->it_busno = 0;
pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
8);
- tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
}
iommu_init_table(tbl, phb->hose->node);
- iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
+ iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
if (pe->pdev)
set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
@@ -1386,12 +1386,24 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
+ ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus;
pci_add_flags(PCI_REASSIGN_ALL_RSRC);
/* Reset IODA tables to a clean state */
rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
if (rc)
pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
+
+ /* If we're running in kdump kerenl, the previous kerenl never
+ * shutdown PCI devices correctly. We already got IODA table
+ * cleaned out. So we have to issue PHB reset to stop all PCI
+ * transactions from previous kerenl.
+ */
+ if (is_kdump_kernel()) {
+ pr_info(" Issue PHB reset ...\n");
+ ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
+ ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET);
+ }
}
void __init pnv_pci_init_ioda2_phb(struct device_node *np)
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 8518817dcdfdc95d04e3b1fc10bfe54432330079..eefbfcc3fd8c40a9d50b9839fb2292f723c7970d 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -131,65 +131,60 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
int i;
data = (struct OpalIoP7IOCPhbErrorData *)common;
- pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n\n",
+ pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n",
hose->global_number, common->version);
if (data->brdgCtl)
- pr_info(" brdgCtl: %08x\n",
+ pr_info("brdgCtl: %08x\n",
data->brdgCtl);
if (data->portStatusReg || data->rootCmplxStatus ||
data->busAgentStatus)
- pr_info(" UtlSts: %08x %08x %08x\n",
+ pr_info("UtlSts: %08x %08x %08x\n",
data->portStatusReg, data->rootCmplxStatus,
data->busAgentStatus);
if (data->deviceStatus || data->slotStatus ||
data->linkStatus || data->devCmdStatus ||
data->devSecStatus)
- pr_info(" RootSts: %08x %08x %08x %08x %08x\n",
+ pr_info("RootSts: %08x %08x %08x %08x %08x\n",
data->deviceStatus, data->slotStatus,
data->linkStatus, data->devCmdStatus,
data->devSecStatus);
if (data->rootErrorStatus || data->uncorrErrorStatus ||
data->corrErrorStatus)
- pr_info(" RootErrSts: %08x %08x %08x\n",
+ pr_info("RootErrSts: %08x %08x %08x\n",
data->rootErrorStatus, data->uncorrErrorStatus,
data->corrErrorStatus);
if (data->tlpHdr1 || data->tlpHdr2 ||
data->tlpHdr3 || data->tlpHdr4)
- pr_info(" RootErrLog: %08x %08x %08x %08x\n",
+ pr_info("RootErrLog: %08x %08x %08x %08x\n",
data->tlpHdr1, data->tlpHdr2,
data->tlpHdr3, data->tlpHdr4);
if (data->sourceId || data->errorClass ||
data->correlator)
- pr_info(" RootErrLog1: %08x %016llx %016llx\n",
+ pr_info("RootErrLog1: %08x %016llx %016llx\n",
data->sourceId, data->errorClass,
data->correlator);
if (data->p7iocPlssr || data->p7iocCsr)
- pr_info(" PhbSts: %016llx %016llx\n",
+ pr_info("PhbSts: %016llx %016llx\n",
data->p7iocPlssr, data->p7iocCsr);
- if (data->lemFir || data->lemErrorMask ||
- data->lemWOF)
- pr_info(" Lem: %016llx %016llx %016llx\n",
+ if (data->lemFir)
+ pr_info("Lem: %016llx %016llx %016llx\n",
data->lemFir, data->lemErrorMask,
data->lemWOF);
- if (data->phbErrorStatus || data->phbFirstErrorStatus ||
- data->phbErrorLog0 || data->phbErrorLog1)
- pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n",
+ if (data->phbErrorStatus)
+ pr_info("PhbErr: %016llx %016llx %016llx %016llx\n",
data->phbErrorStatus, data->phbFirstErrorStatus,
data->phbErrorLog0, data->phbErrorLog1);
- if (data->mmioErrorStatus || data->mmioFirstErrorStatus ||
- data->mmioErrorLog0 || data->mmioErrorLog1)
- pr_info(" OutErr: %016llx %016llx %016llx %016llx\n",
+ if (data->mmioErrorStatus)
+ pr_info("OutErr: %016llx %016llx %016llx %016llx\n",
data->mmioErrorStatus, data->mmioFirstErrorStatus,
data->mmioErrorLog0, data->mmioErrorLog1);
- if (data->dma0ErrorStatus || data->dma0FirstErrorStatus ||
- data->dma0ErrorLog0 || data->dma0ErrorLog1)
- pr_info(" InAErr: %016llx %016llx %016llx %016llx\n",
+ if (data->dma0ErrorStatus)
+ pr_info("InAErr: %016llx %016llx %016llx %016llx\n",
data->dma0ErrorStatus, data->dma0FirstErrorStatus,
data->dma0ErrorLog0, data->dma0ErrorLog1);
- if (data->dma1ErrorStatus || data->dma1FirstErrorStatus ||
- data->dma1ErrorLog0 || data->dma1ErrorLog1)
- pr_info(" InBErr: %016llx %016llx %016llx %016llx\n",
+ if (data->dma1ErrorStatus)
+ pr_info("InBErr: %016llx %016llx %016llx %016llx\n",
data->dma1ErrorStatus, data->dma1FirstErrorStatus,
data->dma1ErrorLog0, data->dma1ErrorLog1);
@@ -198,7 +193,7 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
(data->pestB[i] >> 63) == 0)
continue;
- pr_info(" PE[%3d] A/B: %016llx %016llx\n",
+ pr_info("PE[%3d] A/B: %016llx %016llx\n",
i, data->pestA[i], data->pestB[i]);
}
}
@@ -210,69 +205,63 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
int i;
data = (struct OpalIoPhb3ErrorData*)common;
- pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n\n",
+ pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n",
hose->global_number, common->version);
if (data->brdgCtl)
- pr_info(" brdgCtl: %08x\n",
+ pr_info("brdgCtl: %08x\n",
data->brdgCtl);
if (data->portStatusReg || data->rootCmplxStatus ||
data->busAgentStatus)
- pr_info(" UtlSts: %08x %08x %08x\n",
+ pr_info("UtlSts: %08x %08x %08x\n",
data->portStatusReg, data->rootCmplxStatus,
data->busAgentStatus);
if (data->deviceStatus || data->slotStatus ||
data->linkStatus || data->devCmdStatus ||
data->devSecStatus)
- pr_info(" RootSts: %08x %08x %08x %08x %08x\n",
+ pr_info("RootSts: %08x %08x %08x %08x %08x\n",
data->deviceStatus, data->slotStatus,
data->linkStatus, data->devCmdStatus,
data->devSecStatus);
if (data->rootErrorStatus || data->uncorrErrorStatus ||
data->corrErrorStatus)
- pr_info(" RootErrSts: %08x %08x %08x\n",
+ pr_info("RootErrSts: %08x %08x %08x\n",
data->rootErrorStatus, data->uncorrErrorStatus,
data->corrErrorStatus);
if (data->tlpHdr1 || data->tlpHdr2 ||
data->tlpHdr3 || data->tlpHdr4)
- pr_info(" RootErrLog: %08x %08x %08x %08x\n",
+ pr_info("RootErrLog: %08x %08x %08x %08x\n",
data->tlpHdr1, data->tlpHdr2,
data->tlpHdr3, data->tlpHdr4);
if (data->sourceId || data->errorClass ||
data->correlator)
- pr_info(" RootErrLog1: %08x %016llx %016llx\n",
+ pr_info("RootErrLog1: %08x %016llx %016llx\n",
data->sourceId, data->errorClass,
data->correlator);
- if (data->nFir || data->nFirMask ||
- data->nFirWOF)
- pr_info(" nFir: %016llx %016llx %016llx\n",
+ if (data->nFir)
+ pr_info("nFir: %016llx %016llx %016llx\n",
data->nFir, data->nFirMask,
data->nFirWOF);
if (data->phbPlssr || data->phbCsr)
- pr_info(" PhbSts: %016llx %016llx\n",
+ pr_info("PhbSts: %016llx %016llx\n",
data->phbPlssr, data->phbCsr);
- if (data->lemFir || data->lemErrorMask ||
- data->lemWOF)
- pr_info(" Lem: %016llx %016llx %016llx\n",
+ if (data->lemFir)
+ pr_info("Lem: %016llx %016llx %016llx\n",
data->lemFir, data->lemErrorMask,
data->lemWOF);
- if (data->phbErrorStatus || data->phbFirstErrorStatus ||
- data->phbErrorLog0 || data->phbErrorLog1)
- pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n",
+ if (data->phbErrorStatus)
+ pr_info("PhbErr: %016llx %016llx %016llx %016llx\n",
data->phbErrorStatus, data->phbFirstErrorStatus,
data->phbErrorLog0, data->phbErrorLog1);
- if (data->mmioErrorStatus || data->mmioFirstErrorStatus ||
- data->mmioErrorLog0 || data->mmioErrorLog1)
- pr_info(" OutErr: %016llx %016llx %016llx %016llx\n",
+ if (data->mmioErrorStatus)
+ pr_info("OutErr: %016llx %016llx %016llx %016llx\n",
data->mmioErrorStatus, data->mmioFirstErrorStatus,
data->mmioErrorLog0, data->mmioErrorLog1);
- if (data->dma0ErrorStatus || data->dma0FirstErrorStatus ||
- data->dma0ErrorLog0 || data->dma0ErrorLog1)
- pr_info(" InAErr: %016llx %016llx %016llx %016llx\n",
+ if (data->dma0ErrorStatus)
+ pr_info("InAErr: %016llx %016llx %016llx %016llx\n",
data->dma0ErrorStatus, data->dma0FirstErrorStatus,
data->dma0ErrorLog0, data->dma0ErrorLog1);
- if (data->dma1ErrorStatus || data->dma1FirstErrorStatus ||
- data->dma1ErrorLog0 || data->dma1ErrorLog1)
- pr_info(" InBErr: %016llx %016llx %016llx %016llx\n",
+ if (data->dma1ErrorStatus)
+ pr_info("InBErr: %016llx %016llx %016llx %016llx\n",
data->dma1ErrorStatus, data->dma1FirstErrorStatus,
data->dma1ErrorLog0, data->dma1ErrorLog1);
@@ -281,7 +270,7 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
(data->pestB[i] >> 63) == 0)
continue;
- pr_info(" PE[%3d] A/B: %016llx %016llx\n",
+ pr_info("PE[%3d] A/B: %016llx %016llx\n",
i, data->pestA[i], data->pestB[i]);
}
}
@@ -384,9 +373,6 @@ int pnv_pci_cfg_read(struct device_node *dn,
struct pci_dn *pdn = PCI_DN(dn);
struct pnv_phb *phb = pdn->phb->private_data;
u32 bdfn = (pdn->busno << 8) | pdn->devfn;
-#ifdef CONFIG_EEH
- struct eeh_pe *phb_pe = NULL;
-#endif
s64 rc;
switch (size) {
@@ -412,31 +398,9 @@ int pnv_pci_cfg_read(struct device_node *dn,
default:
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
+
cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
__func__, pdn->busno, pdn->devfn, where, size, *val);
-
- /*
- * Check if the specified PE has been put into frozen
- * state. On the other hand, we needn't do that while
- * the PHB has been put into frozen state because of
- * PHB-fatal errors.
- */
-#ifdef CONFIG_EEH
- phb_pe = eeh_phb_pe_get(pdn->phb);
- if (phb_pe && (phb_pe->state & EEH_PE_ISOLATED))
- return PCIBIOS_SUCCESSFUL;
-
- if (phb->eeh_state & PNV_EEH_STATE_ENABLED) {
- if (*val == EEH_IO_ERROR_VALUE(size) &&
- eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
- return PCIBIOS_DEVICE_NOT_FOUND;
- } else {
- pnv_pci_config_check_eeh(phb, dn);
- }
-#else
- pnv_pci_config_check_eeh(phb, dn);
-#endif
-
return PCIBIOS_SUCCESSFUL;
}
@@ -463,33 +427,74 @@ int pnv_pci_cfg_write(struct device_node *dn,
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
- /* Check if the PHB got frozen due to an error (no response) */
-#ifdef CONFIG_EEH
- if (!(phb->eeh_state & PNV_EEH_STATE_ENABLED))
- pnv_pci_config_check_eeh(phb, dn);
-#else
- pnv_pci_config_check_eeh(phb, dn);
-#endif
-
return PCIBIOS_SUCCESSFUL;
}
+#if CONFIG_EEH
+static bool pnv_pci_cfg_check(struct pci_controller *hose,
+ struct device_node *dn)
+{
+ struct eeh_dev *edev = NULL;
+ struct pnv_phb *phb = hose->private_data;
+
+ /* EEH not enabled ? */
+ if (!(phb->flags & PNV_PHB_FLAG_EEH))
+ return true;
+
+ /* PE reset or device removed ? */
+ edev = of_node_to_eeh_dev(dn);
+ if (edev) {
+ if (edev->pe &&
+ (edev->pe->state & EEH_PE_RESET))
+ return false;
+
+ if (edev->mode & EEH_DEV_REMOVED)
+ return false;
+ }
+
+ return true;
+}
+#else
+static inline pnv_pci_cfg_check(struct pci_controller *hose,
+ struct device_node *dn)
+{
+ return true;
+}
+#endif /* CONFIG_EEH */
+
static int pnv_pci_read_config(struct pci_bus *bus,
unsigned int devfn,
int where, int size, u32 *val)
{
struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
struct pci_dn *pdn;
+ struct pnv_phb *phb;
+ bool found = false;
+ int ret;
+ *val = 0xFFFFFFFF;
for (dn = busdn->child; dn; dn = dn->sibling) {
pdn = PCI_DN(dn);
- if (pdn && pdn->devfn == devfn)
- return pnv_pci_cfg_read(dn, where, size, val);
+ if (pdn && pdn->devfn == devfn) {
+ phb = pdn->phb->private_data;
+ found = true;
+ break;
+ }
}
- *val = 0xFFFFFFFF;
- return PCIBIOS_DEVICE_NOT_FOUND;
+ if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ ret = pnv_pci_cfg_read(dn, where, size, val);
+ if (phb->flags & PNV_PHB_FLAG_EEH) {
+ if (*val == EEH_IO_ERROR_VALUE(size) &&
+ eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ } else {
+ pnv_pci_config_check_eeh(phb, dn);
+ }
+
+ return ret;
}
static int pnv_pci_write_config(struct pci_bus *bus,
@@ -498,14 +503,27 @@ static int pnv_pci_write_config(struct pci_bus *bus,
{
struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
struct pci_dn *pdn;
+ struct pnv_phb *phb;
+ bool found = false;
+ int ret;
for (dn = busdn->child; dn; dn = dn->sibling) {
pdn = PCI_DN(dn);
- if (pdn && pdn->devfn == devfn)
- return pnv_pci_cfg_write(dn, where, size, val);
+ if (pdn && pdn->devfn == devfn) {
+ phb = pdn->phb->private_data;
+ found = true;
+ break;
+ }
}
- return PCIBIOS_DEVICE_NOT_FOUND;
+ if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ ret = pnv_pci_cfg_write(dn, where, size, val);
+ if (!(phb->flags & PNV_PHB_FLAG_EEH))
+ pnv_pci_config_check_eeh(phb, dn);
+
+ return ret;
}
struct pci_ops pnv_pci_ops = {
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index cde169442775c1684f0cd9f2db799d17c685deb3..676232c34328143a4d01719ee7ba5b40b0455965 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -81,28 +81,27 @@ struct pnv_eeh_ops {
int (*configure_bridge)(struct eeh_pe *pe);
int (*next_error)(struct eeh_pe **pe);
};
-
-#define PNV_EEH_STATE_ENABLED (1 << 0) /* EEH enabled */
-#define PNV_EEH_STATE_REMOVED (1 << 1) /* PHB removed */
-
#endif /* CONFIG_EEH */
+#define PNV_PHB_FLAG_EEH (1 << 0)
+
struct pnv_phb {
struct pci_controller *hose;
enum pnv_phb_type type;
enum pnv_phb_model model;
u64 hub_id;
u64 opal_id;
+ int flags;
void __iomem *regs;
int initialized;
spinlock_t lock;
#ifdef CONFIG_EEH
struct pnv_eeh_ops *eeh_ops;
- int eeh_state;
#endif
#ifdef CONFIG_DEBUG_FS
+ int has_dbgfs;
struct dentry *dbgfs;
#endif
@@ -205,5 +204,7 @@ extern void pnv_pci_init_ioda_hub(struct device_node *np);
extern void pnv_pci_init_ioda2_phb(struct device_node *np);
extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
__be64 *startp, __be64 *endp, bool rm);
+extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
+extern int ioda_eeh_phb_reset(struct pci_controller *hose, int option);
#endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index 0051e108ef0f86bd971e212db24c3110cfbf8993..75501bfede7f9b2fdc51a3987fd03d09383477ee 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -25,4 +25,6 @@ static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
extern void pnv_lpc_init(void);
+bool cpu_core_split_required(void);
+
#endif /* _POWERNV_H */
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 8723d32632f55b6eb49b25d55711140f60a95fe7..8c16a5f9672809fbbbc3bdfb934459f9d3d2ebb8 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/bug.h>
#include <linux/pci.h>
+#include <linux/cpufreq.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
@@ -98,11 +99,32 @@ static void pnv_show_cpuinfo(struct seq_file *m)
of_node_put(root);
}
+static void pnv_prepare_going_down(void)
+{
+ /*
+ * Disable all notifiers from OPAL, we can't
+ * service interrupts anymore anyway
+ */
+ opal_notifier_disable();
+
+ /* Soft disable interrupts */
+ local_irq_disable();
+
+ /*
+ * Return secondary CPUs to firwmare if a flash update
+ * is pending otherwise we will get all sort of error
+ * messages about CPU being stuck etc.. This will also
+ * have the side effect of hard disabling interrupts so
+ * past this point, the kernel is effectively dead.
+ */
+ opal_flash_term_callback();
+}
+
static void __noreturn pnv_restart(char *cmd)
{
long rc = OPAL_BUSY;
- opal_notifier_disable();
+ pnv_prepare_going_down();
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_cec_reboot();
@@ -119,7 +141,7 @@ static void __noreturn pnv_power_off(void)
{
long rc = OPAL_BUSY;
- opal_notifier_disable();
+ pnv_prepare_going_down();
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_cec_power_down(0);
@@ -222,6 +244,13 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
}
#endif /* CONFIG_KEXEC */
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+static unsigned long pnv_memory_block_size(void)
+{
+ return 256UL * 1024 * 1024;
+}
+#endif
+
static void __init pnv_setup_machdep_opal(void)
{
ppc_md.get_boot_time = opal_get_boot_time;
@@ -269,6 +298,25 @@ static int __init pnv_probe(void)
return 1;
}
+/*
+ * Returns the cpu frequency for 'cpu' in Hz. This is used by
+ * /proc/cpuinfo
+ */
+unsigned long pnv_get_proc_freq(unsigned int cpu)
+{
+ unsigned long ret_freq;
+
+ ret_freq = cpufreq_quick_get(cpu) * 1000ul;
+
+ /*
+ * If the backend cpufreq driver does not exist,
+ * then fallback to old way of reporting the clockrate.
+ */
+ if (!ret_freq)
+ ret_freq = ppc_proc_freq;
+ return ret_freq;
+}
+
define_machine(powernv) {
.name = "PowerNV",
.probe = pnv_probe,
@@ -276,6 +324,7 @@ define_machine(powernv) {
.setup_arch = pnv_setup_arch,
.init_IRQ = pnv_init_IRQ,
.show_cpuinfo = pnv_show_cpuinfo,
+ .get_proc_freq = pnv_get_proc_freq,
.progress = pnv_progress,
.machine_shutdown = pnv_shutdown,
.power_save = power7_idle,
@@ -284,4 +333,7 @@ define_machine(powernv) {
#ifdef CONFIG_KEXEC
.kexec_cpu_down = pnv_kexec_cpu_down,
#endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+ .memory_block_size = pnv_memory_block_size,
+#endif
};
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index bf5fcd452168c6056492115c0232b40f25a2e407..0062a43a2e0d8e96698cf0cb090adce0170b4581 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -31,6 +31,7 @@
#include <asm/xics.h>
#include <asm/opal.h>
#include <asm/runlatch.h>
+#include <asm/code-patching.h>
#include "powernv.h"
@@ -50,8 +51,8 @@ static void pnv_smp_setup_cpu(int cpu)
int pnv_smp_kick_cpu(int nr)
{
unsigned int pcpu = get_hard_smp_processor_id(nr);
- unsigned long start_here = __pa(*((unsigned long *)
- generic_secondary_smp_init));
+ unsigned long start_here =
+ __pa(ppc_function_entry(generic_secondary_smp_init));
long rc;
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -158,17 +159,19 @@ static void pnv_smp_cpu_kill_self(void)
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
while (!generic_check_cpu_restart(cpu)) {
ppc64_runlatch_off();
- power7_nap();
+ power7_nap(1);
ppc64_runlatch_on();
- if (!generic_check_cpu_restart(cpu)) {
+
+ /* Reenable IRQs briefly to clear the IPI that woke us */
+ local_irq_enable();
+ local_irq_disable();
+ mb();
+
+ if (cpu_core_split_required())
+ continue;
+
+ if (!generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline !\n", cpu);
- /* We may be getting an IPI, so we re-enable
- * interrupts to process it, it will be ignored
- * since we aren't online (hopefully)
- */
- local_irq_enable();
- local_irq_disable();
- }
}
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
DBG("CPU%d coming online...\n", cpu);
diff --git a/arch/powerpc/platforms/powernv/subcore-asm.S b/arch/powerpc/platforms/powernv/subcore-asm.S
new file mode 100644
index 0000000000000000000000000000000000000000..39bb24aa8f3413291a25522b71b15c18925f0a3f
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/subcore-asm.S
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+
+#include "subcore.h"
+
+
+_GLOBAL(split_core_secondary_loop)
+ /*
+ * r3 = u8 *state, used throughout the routine
+ * r4 = temp
+ * r5 = temp
+ * ..
+ * r12 = MSR
+ */
+ mfmsr r12
+
+ /* Disable interrupts so SRR0/1 don't get trashed */
+ li r4,0
+ ori r4,r4,MSR_EE|MSR_SE|MSR_BE|MSR_RI
+ andc r4,r12,r4
+ sync
+ mtmsrd r4
+
+ /* Switch to real mode and leave interrupts off */
+ li r5, MSR_IR|MSR_DR
+ andc r5, r4, r5
+
+ LOAD_REG_ADDR(r4, real_mode)
+
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r5
+ rfid
+ b . /* prevent speculative execution */
+
+real_mode:
+ /* Grab values from unsplit SPRs */
+ mfspr r6, SPRN_LDBAR
+ mfspr r7, SPRN_PMMAR
+ mfspr r8, SPRN_PMCR
+ mfspr r9, SPRN_RPR
+ mfspr r10, SPRN_SDR1
+
+ /* Order reading the SPRs vs telling the primary we are ready to split */
+ sync
+
+ /* Tell thread 0 we are in real mode */
+ li r4, SYNC_STEP_REAL_MODE
+ stb r4, 0(r3)
+
+ li r5, (HID0_POWER8_4LPARMODE | HID0_POWER8_2LPARMODE)@highest
+ sldi r5, r5, 48
+
+ /* Loop until we see the split happen in HID0 */
+1: mfspr r4, SPRN_HID0
+ and. r4, r4, r5
+ beq 1b
+
+ /*
+ * We only need to initialise the below regs once for each subcore,
+ * but it's simpler and harmless to do it on each thread.
+ */
+
+ /* Make sure various SPRS have sane values */
+ li r4, 0
+ mtspr SPRN_LPID, r4
+ mtspr SPRN_PCR, r4
+ mtspr SPRN_HDEC, r4
+
+ /* Restore SPR values now we are split */
+ mtspr SPRN_LDBAR, r6
+ mtspr SPRN_PMMAR, r7
+ mtspr SPRN_PMCR, r8
+ mtspr SPRN_RPR, r9
+ mtspr SPRN_SDR1, r10
+
+ LOAD_REG_ADDR(r5, virtual_mode)
+
+ /* Get out of real mode */
+ mtspr SPRN_SRR0,r5
+ mtspr SPRN_SRR1,r12
+ rfid
+ b . /* prevent speculative execution */
+
+virtual_mode:
+ blr
diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c
new file mode 100644
index 0000000000000000000000000000000000000000..894ecb3eb5963506be9e0efead851a48cf577b1e
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/subcore.c
@@ -0,0 +1,392 @@
+/*
+ * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) "powernv: " fmt
+
+#include <linux/kernel.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/gfp.h>
+#include <linux/smp.h>
+#include <linux/stop_machine.h>
+
+#include <asm/cputhreads.h>
+#include <asm/kvm_ppc.h>
+#include <asm/machdep.h>
+#include <asm/opal.h>
+#include <asm/smp.h>
+
+#include "subcore.h"
+
+
+/*
+ * Split/unsplit procedure:
+ *
+ * A core can be in one of three states, unsplit, 2-way split, and 4-way split.
+ *
+ * The mapping to subcores_per_core is simple:
+ *
+ * State | subcores_per_core
+ * ------------|------------------
+ * Unsplit | 1
+ * 2-way split | 2
+ * 4-way split | 4
+ *
+ * The core is split along thread boundaries, the mapping between subcores and
+ * threads is as follows:
+ *
+ * Unsplit:
+ * ----------------------------
+ * Subcore | 0 |
+ * ----------------------------
+ * Thread | 0 1 2 3 4 5 6 7 |
+ * ----------------------------
+ *
+ * 2-way split:
+ * -------------------------------------
+ * Subcore | 0 | 1 |
+ * -------------------------------------
+ * Thread | 0 1 2 3 | 4 5 6 7 |
+ * -------------------------------------
+ *
+ * 4-way split:
+ * -----------------------------------------
+ * Subcore | 0 | 1 | 2 | 3 |
+ * -----------------------------------------
+ * Thread | 0 1 | 2 3 | 4 5 | 6 7 |
+ * -----------------------------------------
+ *
+ *
+ * Transitions
+ * -----------
+ *
+ * It is not possible to transition between either of the split states, the
+ * core must first be unsplit. The legal transitions are:
+ *
+ * ----------- ---------------
+ * | | <----> | 2-way split |
+ * | | ---------------
+ * | Unsplit |
+ * | | ---------------
+ * | | <----> | 4-way split |
+ * ----------- ---------------
+ *
+ * Unsplitting
+ * -----------
+ *
+ * Unsplitting is the simpler procedure. It requires thread 0 to request the
+ * unsplit while all other threads NAP.
+ *
+ * Thread 0 clears HID0_POWER8_DYNLPARDIS (Dynamic LPAR Disable). This tells
+ * the hardware that if all threads except 0 are napping, the hardware should
+ * unsplit the core.
+ *
+ * Non-zero threads are sent to a NAP loop, they don't exit the loop until they
+ * see the core unsplit.
+ *
+ * Core 0 spins waiting for the hardware to see all the other threads napping
+ * and perform the unsplit.
+ *
+ * Once thread 0 sees the unsplit, it IPIs the secondary threads to wake them
+ * out of NAP. They will then see the core unsplit and exit the NAP loop.
+ *
+ * Splitting
+ * ---------
+ *
+ * The basic splitting procedure is fairly straight forward. However it is
+ * complicated by the fact that after the split occurs, the newly created
+ * subcores are not in a fully initialised state.
+ *
+ * Most notably the subcores do not have the correct value for SDR1, which
+ * means they must not be running in virtual mode when the split occurs. The
+ * subcores have separate timebases SPRs but these are pre-synchronised by
+ * opal.
+ *
+ * To begin with secondary threads are sent to an assembly routine. There they
+ * switch to real mode, so they are immune to the uninitialised SDR1 value.
+ * Once in real mode they indicate that they are in real mode, and spin waiting
+ * to see the core split.
+ *
+ * Thread 0 waits to see that all secondaries are in real mode, and then begins
+ * the splitting procedure. It firstly sets HID0_POWER8_DYNLPARDIS, which
+ * prevents the hardware from unsplitting. Then it sets the appropriate HID bit
+ * to request the split, and spins waiting to see that the split has happened.
+ *
+ * Concurrently the secondaries will notice the split. When they do they set up
+ * their SPRs, notably SDR1, and then they can return to virtual mode and exit
+ * the procedure.
+ */
+
+/* Initialised at boot by subcore_init() */
+static int subcores_per_core;
+
+/*
+ * Used to communicate to offline cpus that we want them to pop out of the
+ * offline loop and do a split or unsplit.
+ *
+ * 0 - no split happening
+ * 1 - unsplit in progress
+ * 2 - split to 2 in progress
+ * 4 - split to 4 in progress
+ */
+static int new_split_mode;
+
+static cpumask_var_t cpu_offline_mask;
+
+struct split_state {
+ u8 step;
+ u8 master;
+};
+
+static DEFINE_PER_CPU(struct split_state, split_state);
+
+static void wait_for_sync_step(int step)
+{
+ int i, cpu = smp_processor_id();
+
+ for (i = cpu + 1; i < cpu + threads_per_core; i++)
+ while(per_cpu(split_state, i).step < step)
+ barrier();
+
+ /* Order the wait loop vs any subsequent loads/stores. */
+ mb();
+}
+
+static void unsplit_core(void)
+{
+ u64 hid0, mask;
+ int i, cpu;
+
+ mask = HID0_POWER8_2LPARMODE | HID0_POWER8_4LPARMODE;
+
+ cpu = smp_processor_id();
+ if (cpu_thread_in_core(cpu) != 0) {
+ while (mfspr(SPRN_HID0) & mask)
+ power7_nap(0);
+
+ per_cpu(split_state, cpu).step = SYNC_STEP_UNSPLIT;
+ return;
+ }
+
+ hid0 = mfspr(SPRN_HID0);
+ hid0 &= ~HID0_POWER8_DYNLPARDIS;
+ mtspr(SPRN_HID0, hid0);
+
+ while (mfspr(SPRN_HID0) & mask)
+ cpu_relax();
+
+ /* Wake secondaries out of NAP */
+ for (i = cpu + 1; i < cpu + threads_per_core; i++)
+ smp_send_reschedule(i);
+
+ wait_for_sync_step(SYNC_STEP_UNSPLIT);
+}
+
+static void split_core(int new_mode)
+{
+ struct { u64 value; u64 mask; } split_parms[2] = {
+ { HID0_POWER8_1TO2LPAR, HID0_POWER8_2LPARMODE },
+ { HID0_POWER8_1TO4LPAR, HID0_POWER8_4LPARMODE }
+ };
+ int i, cpu;
+ u64 hid0;
+
+ /* Convert new_mode (2 or 4) into an index into our parms array */
+ i = (new_mode >> 1) - 1;
+ BUG_ON(i < 0 || i > 1);
+
+ cpu = smp_processor_id();
+ if (cpu_thread_in_core(cpu) != 0) {
+ split_core_secondary_loop(&per_cpu(split_state, cpu).step);
+ return;
+ }
+
+ wait_for_sync_step(SYNC_STEP_REAL_MODE);
+
+ /* Write new mode */
+ hid0 = mfspr(SPRN_HID0);
+ hid0 |= HID0_POWER8_DYNLPARDIS | split_parms[i].value;
+ mtspr(SPRN_HID0, hid0);
+
+ /* Wait for it to happen */
+ while (!(mfspr(SPRN_HID0) & split_parms[i].mask))
+ cpu_relax();
+}
+
+static void cpu_do_split(int new_mode)
+{
+ /*
+ * At boot subcores_per_core will be 0, so we will always unsplit at
+ * boot. In the usual case where the core is already unsplit it's a
+ * nop, and this just ensures the kernel's notion of the mode is
+ * consistent with the hardware.
+ */
+ if (subcores_per_core != 1)
+ unsplit_core();
+
+ if (new_mode != 1)
+ split_core(new_mode);
+
+ mb();
+ per_cpu(split_state, smp_processor_id()).step = SYNC_STEP_FINISHED;
+}
+
+bool cpu_core_split_required(void)
+{
+ smp_rmb();
+
+ if (!new_split_mode)
+ return false;
+
+ cpu_do_split(new_split_mode);
+
+ return true;
+}
+
+static int cpu_update_split_mode(void *data)
+{
+ int cpu, new_mode = *(int *)data;
+
+ if (this_cpu_ptr(&split_state)->master) {
+ new_split_mode = new_mode;
+ smp_wmb();
+
+ cpumask_andnot(cpu_offline_mask, cpu_present_mask,
+ cpu_online_mask);
+
+ /* This should work even though the cpu is offline */
+ for_each_cpu(cpu, cpu_offline_mask)
+ smp_send_reschedule(cpu);
+ }
+
+ cpu_do_split(new_mode);
+
+ if (this_cpu_ptr(&split_state)->master) {
+ /* Wait for all cpus to finish before we touch subcores_per_core */
+ for_each_present_cpu(cpu) {
+ if (cpu >= setup_max_cpus)
+ break;
+
+ while(per_cpu(split_state, cpu).step < SYNC_STEP_FINISHED)
+ barrier();
+ }
+
+ new_split_mode = 0;
+
+ /* Make the new mode public */
+ subcores_per_core = new_mode;
+ threads_per_subcore = threads_per_core / subcores_per_core;
+
+ /* Make sure the new mode is written before we exit */
+ mb();
+ }
+
+ return 0;
+}
+
+static int set_subcores_per_core(int new_mode)
+{
+ struct split_state *state;
+ int cpu;
+
+ if (kvm_hv_mode_active()) {
+ pr_err("Unable to change split core mode while KVM active.\n");
+ return -EBUSY;
+ }
+
+ /*
+ * We are only called at boot, or from the sysfs write. If that ever
+ * changes we'll need a lock here.
+ */
+ BUG_ON(new_mode < 1 || new_mode > 4 || new_mode == 3);
+
+ for_each_present_cpu(cpu) {
+ state = &per_cpu(split_state, cpu);
+ state->step = SYNC_STEP_INITIAL;
+ state->master = 0;
+ }
+
+ get_online_cpus();
+
+ /* This cpu will update the globals before exiting stop machine */
+ this_cpu_ptr(&split_state)->master = 1;
+
+ /* Ensure state is consistent before we call the other cpus */
+ mb();
+
+ stop_machine(cpu_update_split_mode, &new_mode, cpu_online_mask);
+
+ put_online_cpus();
+
+ return 0;
+}
+
+static ssize_t __used store_subcores_per_core(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ unsigned long val;
+ int rc;
+
+ /* We are serialised by the attribute lock */
+
+ rc = sscanf(buf, "%lx", &val);
+ if (rc != 1)
+ return -EINVAL;
+
+ switch (val) {
+ case 1:
+ case 2:
+ case 4:
+ if (subcores_per_core == val)
+ /* Nothing to do */
+ goto out;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rc = set_subcores_per_core(val);
+ if (rc)
+ return rc;
+
+out:
+ return count;
+}
+
+static ssize_t show_subcores_per_core(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%x\n", subcores_per_core);
+}
+
+static DEVICE_ATTR(subcores_per_core, 0644,
+ show_subcores_per_core, store_subcores_per_core);
+
+static int subcore_init(void)
+{
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ return 0;
+
+ /*
+ * We need all threads in a core to be present to split/unsplit so
+ * continue only if max_cpus are aligned to threads_per_core.
+ */
+ if (setup_max_cpus % threads_per_core)
+ return 0;
+
+ BUG_ON(!alloc_cpumask_var(&cpu_offline_mask, GFP_KERNEL));
+
+ set_subcores_per_core(1);
+
+ return device_create_file(cpu_subsys.dev_root,
+ &dev_attr_subcores_per_core);
+}
+machine_device_initcall(powernv, subcore_init);
diff --git a/arch/powerpc/platforms/powernv/subcore.h b/arch/powerpc/platforms/powernv/subcore.h
new file mode 100644
index 0000000000000000000000000000000000000000..148abc91debfd84735ac6c8967315dded6f8e8a9
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/subcore.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* These are ordered and tested with <= */
+#define SYNC_STEP_INITIAL 0
+#define SYNC_STEP_UNSPLIT 1 /* Set by secondary when it sees unsplit */
+#define SYNC_STEP_REAL_MODE 2 /* Set by secondary when in real mode */
+#define SYNC_STEP_FINISHED 3 /* Set by secondary when split/unsplit is done */
+
+#ifndef __ASSEMBLY__
+void split_core_secondary_loop(u8 *state);
+#endif
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 8a8f0472d98fd0e56d9c199c85c4d513e04f8d9a..0bec0c02c5e718cc493dad1b273b09150b5f6632 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -175,6 +175,36 @@ static int pseries_eeh_find_cap(struct device_node *dn, int cap)
return 0;
}
+static int pseries_eeh_find_ecap(struct device_node *dn, int cap)
+{
+ struct pci_dn *pdn = PCI_DN(dn);
+ struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+ u32 header;
+ int pos = 256;
+ int ttl = (4096 - 256) / 8;
+
+ if (!edev || !edev->pcie_cap)
+ return 0;
+ if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+ return 0;
+ else if (!header)
+ return 0;
+
+ while (ttl-- > 0) {
+ if (PCI_EXT_CAP_ID(header) == cap && pos)
+ return pos;
+
+ pos = PCI_EXT_CAP_NEXT(header);
+ if (pos < 256)
+ break;
+
+ if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+ break;
+ }
+
+ return 0;
+}
+
/**
* pseries_eeh_of_probe - EEH probe on the given device
* @dn: OF node
@@ -220,7 +250,9 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
* or PCIe switch downstream port.
*/
edev->class_code = class_code;
+ edev->pcix_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_PCIX);
edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
+ edev->aer_cap = pseries_eeh_find_ecap(dn, PCI_EXT_CAP_ID_ERR);
edev->mode &= 0xFFFFFF00;
if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
edev->mode |= EEH_DEV_BRIDGE;
@@ -464,6 +496,7 @@ static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
} else {
result = EEH_STATE_NOT_SUPPORT;
}
+ break;
default:
result = EEH_STATE_NOT_SUPPORT;
}
@@ -499,11 +532,19 @@ static int pseries_eeh_reset(struct eeh_pe *pe, int option)
/* If fundamental-reset not supported, try hot-reset */
if (option == EEH_RESET_FUNDAMENTAL &&
ret == -8) {
+ option = EEH_RESET_HOT;
ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), EEH_RESET_HOT);
+ BUID_LO(pe->phb->buid), option);
}
+ /* We need reset hold or settlement delay */
+ if (option == EEH_RESET_FUNDAMENTAL ||
+ option == EEH_RESET_HOT)
+ msleep(EEH_PE_RST_HOLD_TIME);
+ else
+ msleep(EEH_PE_RST_SETTLE_TIME);
+
return ret;
}
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 7f75c94af822c40322d8a4a751e983ad0e2bcdae..7995135170a31a35a7824703f72fe26b93b145a7 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -21,7 +21,7 @@
#include <asm/prom.h>
#include <asm/sparsemem.h>
-static unsigned long get_memblock_size(void)
+unsigned long pseries_memory_block_size(void)
{
struct device_node *np;
unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE;
@@ -64,17 +64,6 @@ static unsigned long get_memblock_size(void)
return memblock_size;
}
-/* WARNING: This is going to override the generic definition whenever
- * pseries is built-in regardless of what platform is active at boot
- * time. This is fine for now as this is the only "option" and it
- * should work everywhere. If not, we'll have to turn this into a
- * ppc_md. callback
- */
-unsigned long memory_block_size_bytes(void)
-{
- return get_memblock_size();
-}
-
#ifdef CONFIG_MEMORY_HOTREMOVE
static int pseries_remove_memory(u64 start, u64 size)
{
@@ -105,7 +94,7 @@ static int pseries_remove_memblock(unsigned long base, unsigned int memblock_siz
if (!pfn_valid(start_pfn))
goto out;
- block_sz = memory_block_size_bytes();
+ block_sz = pseries_memory_block_size();
sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
nid = memory_add_physaddr_to_nid(base);
@@ -201,7 +190,7 @@ static int pseries_update_drconf_memory(struct of_prop_reconfig *pr)
u32 *p;
int i, rc = -EINVAL;
- memblock_size = get_memblock_size();
+ memblock_size = pseries_memory_block_size();
if (!memblock_size)
return -EINVAL;
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 444fe7759e55097236a42534009304baa3cf1693..99ecf0a5a92904de67d073c82d0d83be45dbf26a 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -49,7 +49,7 @@ END_FTR_SECTION(0, 1); \
std r0,16(r1); \
addi r4,r1,STK_PARAM(FIRST_REG); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
- bl .__trace_hcall_entry; \
+ bl __trace_hcall_entry; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
ld r3,STK_PARAM(R3)(r1); \
@@ -83,7 +83,7 @@ END_FTR_SECTION(0, 1); \
mr r3,r6; \
std r0,16(r1); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
- bl .__trace_hcall_exit; \
+ bl __trace_hcall_exit; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
ld r3,STK_PARAM(R3)(r1); \
@@ -106,7 +106,7 @@ END_FTR_SECTION(0, 1); \
.text
-_GLOBAL(plpar_hcall_norets)
+_GLOBAL_TOC(plpar_hcall_norets)
HMT_MEDIUM
mfcr r0
@@ -122,7 +122,7 @@ _GLOBAL(plpar_hcall_norets)
mtcrf 0xff,r0
blr /* return r3 = status */
-_GLOBAL(plpar_hcall)
+_GLOBAL_TOC(plpar_hcall)
HMT_MEDIUM
mfcr r0
@@ -188,7 +188,7 @@ _GLOBAL(plpar_hcall_raw)
blr /* return r3 = status */
-_GLOBAL(plpar_hcall9)
+_GLOBAL_TOC(plpar_hcall9)
HMT_MEDIUM
mfcr r0
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 99219530ea4aaad0da768b72d84a4caa1f96fcb0..361add62abf1089d4cd65aa28c72264a040de635 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -64,4 +64,6 @@ extern int dlpar_detach_node(struct device_node *);
struct pci_host_bridge;
int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
+unsigned long pseries_memory_block_size(void);
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 099d2df976a2145f49198b599d43353412ea7457..f2f40e64658f054aa650d1fd329a74b5dc478bde 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -510,7 +510,11 @@ static void __init pSeries_setup_arch(void)
static int __init pSeries_init_panel(void)
{
/* Manually leave the kernel version on the panel. */
+#ifdef __BIG_ENDIAN__
ppc_md.progress("Linux ppc64\n", 0);
+#else
+ ppc_md.progress("Linux ppc64le\n", 0);
+#endif
ppc_md.progress(init_utsname()->version, 0);
return 0;
@@ -806,4 +810,7 @@ define_machine(pseries) {
#ifdef CONFIG_KEXEC
.machine_kexec = pSeries_machine_kexec,
#endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+ .memory_block_size = pseries_memory_block_size,
+#endif
};
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 24f58cb0a543ece1cb92242b36ec8e18c145f5be..a3555b10c1a54dc3d13cd6feb4a5d2301c64343e 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -44,6 +44,7 @@
#include <asm/xics.h>
#include <asm/dbell.h>
#include <asm/plpar_wrappers.h>
+#include <asm/code-patching.h>
#include "pseries.h"
#include "offline_states.h"
@@ -96,8 +97,8 @@ int smp_query_cpu_stopped(unsigned int pcpu)
static inline int smp_startup_cpu(unsigned int lcpu)
{
int status;
- unsigned long start_here = __pa((u32)*((unsigned long *)
- generic_secondary_smp_init));
+ unsigned long start_here =
+ __pa(ppc_function_entry(generic_secondary_smp_init));
unsigned int pcpu;
int start_cpu;
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
index 268bc899c1f7168ca5827920010af0b53595c228..8c79ce016cf10a1f48148fc7775be474ee40de2d 100644
--- a/arch/powerpc/platforms/wsp/scom_smp.c
+++ b/arch/powerpc/platforms/wsp/scom_smp.c
@@ -20,6 +20,7 @@
#include <asm/reg_a2.h>
#include <asm/scom.h>
#include <asm/udbg.h>
+#include <asm/code-patching.h>
#include "wsp.h"
@@ -405,7 +406,7 @@ int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np)
goto fail;
}
- start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
+ start_here = ppc_function_entry(core_setup ? generic_secondary_smp_init
: generic_secondary_thread_init);
pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 7baa70d6dc016c85b8e4874f7618dbf9145d30ac..a19332a3871551713e2194e8490aaa15cb493c36 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -7,6 +7,12 @@ config PPC4xx_PCI_EXPRESS
depends on PCI && 4xx
default n
+config PPC4xx_HSTA_MSI
+ bool
+ depends on PCI_MSI
+ depends on PCI && 4xx
+ default n
+
config PPC4xx_MSI
bool
depends on PCI_MSI
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index afbcc37aa094559200aff7c477bcefeabdae2c49..f7cb2a1b01fa053ddbd7df7aca8a423fc84af56f 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
+obj-$(CONFIG_PPC4xx_HSTA_MSI) += ppc4xx_hsta_msi.o
obj-$(CONFIG_PPC4xx_MSI) += ppc4xx_msi.o
obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o
obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 3f415e252ea54fc34e8dee84ea7de1b56fd54ec1..4bd091a05583b7eeed07c22c2375be83cbcf34a9 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1150,8 +1150,7 @@ static int fsl_pci_pme_probe(struct pci_controller *hose)
pci = hose->private_data;
/* Enable PTOD, ENL23D & EXL23D */
- out_be32(&pci->pex_pme_mes_disr, 0);
- setbits32(&pci->pex_pme_mes_disr,
+ clrbits32(&pci->pex_pme_mes_disr,
PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D);
out_be32(&pci->pex_pme_mes_ier, 0);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index cf2b0840a672f893a3b2386154716ef54672dfd7..c04b718307c89837efe57b1df82c97e204e3cde0 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -391,8 +391,10 @@ int fsl_rio_setup(struct platform_device *dev)
ops->get_inb_message = fsl_get_inb_message;
rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
- if (!rmu_node)
+ if (!rmu_node) {
+ dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
goto err_rmu;
+ }
rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
if (rc) {
dev_err(&dev->dev, "Can't get %s property 'reg'\n",
@@ -413,6 +415,7 @@ int fsl_rio_setup(struct platform_device *dev)
/*set up doobell node*/
np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
if (!np) {
+ dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
rc = -ENODEV;
goto err_dbell;
}
@@ -441,6 +444,7 @@ int fsl_rio_setup(struct platform_device *dev)
/*set up port write node*/
np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
if (!np) {
+ dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
rc = -ENODEV;
goto err_pw;
}
@@ -633,14 +637,18 @@ int fsl_rio_setup(struct platform_device *dev)
return 0;
err:
kfree(pw);
+ pw = NULL;
err_pw:
kfree(dbell);
+ dbell = NULL;
err_dbell:
iounmap(rmu_regs_win);
+ rmu_regs_win = NULL;
err_rmu:
kfree(ops);
err_ops:
iounmap(rio_regs_win);
+ rio_regs_win = NULL;
err_rio_regs:
return rc;
}
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
index 00e224a1048c9ed0a690ad694bdd0c8a84318eed..b48197ae44d0f1ebfb26a8ca4b5d4ca023c5dbce 100644
--- a/arch/powerpc/sysdev/fsl_rmu.c
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -881,9 +881,9 @@ fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport);
if (rc < 0) {
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- rmu->msg_tx_ring.virt_buffer[i],
- rmu->msg_tx_ring.phys_buffer[i]);
+ dma_free_coherent(priv->dev,
+ rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
goto out;
}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8209744b28290b8a2466cf2a8600f0f34d920708..be33c9768ea11b376669083eeb4eec605ae13e16 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1588,10 +1588,6 @@ void __init mpic_init(struct mpic *mpic)
num_timers = 8;
}
- /* FSL mpic error interrupt intialization */
- if (mpic->flags & MPIC_FSL_HAS_EIMR)
- mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
-
/* Initialize timers to our reserved vectors and mask them for now */
for (i = 0; i < num_timers; i++) {
unsigned int offset = mpic_tm_offset(mpic, i);
@@ -1675,6 +1671,10 @@ void __init mpic_init(struct mpic *mpic)
irq_set_chained_handler(virq, &mpic_cascade);
}
}
+
+ /* FSL mpic error interrupt intialization */
+ if (mpic->flags & MPIC_FSL_HAS_EIMR)
+ mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
}
void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio)
diff --git a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
new file mode 100644
index 0000000000000000000000000000000000000000..11c888416f0a881665f4e8b6c230d93454bafbc2
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
@@ -0,0 +1,215 @@
+/*
+ * MSI support for PPC4xx SoCs using High Speed Transfer Assist (HSTA) for
+ * generation of the interrupt.
+ *
+ * Copyright © 2013 Alistair Popple <alistair@popple.id.au> IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/semaphore.h>
+#include <asm/msi_bitmap.h>
+
+struct ppc4xx_hsta_msi {
+ struct device *dev;
+
+ /* The ioremapped HSTA MSI IO space */
+ u32 __iomem *data;
+
+ /* Physical address of HSTA MSI IO space */
+ u64 address;
+ struct msi_bitmap bmp;
+
+ /* An array mapping offsets to hardware IRQs */
+ int *irq_map;
+
+ /* Number of hwirqs supported */
+ int irq_count;
+};
+static struct ppc4xx_hsta_msi ppc4xx_hsta_msi;
+
+static int hsta_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ struct msi_msg msg;
+ struct msi_desc *entry;
+ int irq, hwirq;
+ u64 addr;
+
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ irq = msi_bitmap_alloc_hwirqs(&ppc4xx_hsta_msi.bmp, 1);
+ if (irq < 0) {
+ pr_debug("%s: Failed to allocate msi interrupt\n",
+ __func__);
+ return irq;
+ }
+
+ hwirq = ppc4xx_hsta_msi.irq_map[irq];
+ if (hwirq == NO_IRQ) {
+ pr_err("%s: Failed mapping irq %d\n", __func__, irq);
+ return -EINVAL;
+ }
+
+ /*
+ * HSTA generates interrupts on writes to 128-bit aligned
+ * addresses.
+ */
+ addr = ppc4xx_hsta_msi.address + irq*0x10;
+ msg.address_hi = upper_32_bits(addr);
+ msg.address_lo = lower_32_bits(addr);
+
+ /* Data is not used by the HSTA. */
+ msg.data = 0;
+
+ pr_debug("%s: Setup irq %d (0x%0llx)\n", __func__, hwirq,
+ (((u64) msg.address_hi) << 32) | msg.address_lo);
+
+ if (irq_set_msi_desc(hwirq, entry)) {
+ pr_err(
+ "%s: Invalid hwirq %d specified in device tree\n",
+ __func__, hwirq);
+ msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+ return -EINVAL;
+ }
+ write_msi_msg(hwirq, &msg);
+ }
+
+ return 0;
+}
+
+static int hsta_find_hwirq_offset(int hwirq)
+{
+ int irq;
+
+ /* Find the offset given the hwirq */
+ for (irq = 0; irq < ppc4xx_hsta_msi.irq_count; irq++)
+ if (ppc4xx_hsta_msi.irq_map[irq] == hwirq)
+ return irq;
+
+ return -EINVAL;
+}
+
+static void hsta_teardown_msi_irqs(struct pci_dev *dev)
+{
+ struct msi_desc *entry;
+ int irq;
+
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ if (entry->irq == NO_IRQ)
+ continue;
+
+ irq = hsta_find_hwirq_offset(entry->irq);
+
+ /* entry->irq should always be in irq_map */
+ BUG_ON(irq < 0);
+ irq_set_msi_desc(entry->irq, NULL);
+ msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+ pr_debug("%s: Teardown IRQ %u (index %u)\n", __func__,
+ entry->irq, irq);
+ }
+}
+
+static int hsta_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+ /* We don't support MSI-X */
+ if (type == PCI_CAP_ID_MSIX) {
+ pr_debug("%s: MSI-X not supported.\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int hsta_msi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *mem;
+ int irq, ret, irq_count;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(mem)) {
+ dev_err(dev, "Unable to get mmio space\n");
+ return -EINVAL;
+ }
+
+ irq_count = of_irq_count(dev->of_node);
+ if (!irq_count) {
+ dev_err(dev, "Unable to find IRQ range\n");
+ return -EINVAL;
+ }
+
+ ppc4xx_hsta_msi.dev = dev;
+ ppc4xx_hsta_msi.address = mem->start;
+ ppc4xx_hsta_msi.data = ioremap(mem->start, resource_size(mem));
+ ppc4xx_hsta_msi.irq_count = irq_count;
+ if (IS_ERR(ppc4xx_hsta_msi.data)) {
+ dev_err(dev, "Unable to map memory\n");
+ return -ENOMEM;
+ }
+
+ ret = msi_bitmap_alloc(&ppc4xx_hsta_msi.bmp, irq_count, dev->of_node);
+ if (ret)
+ goto out;
+
+ ppc4xx_hsta_msi.irq_map = kmalloc(sizeof(int) * irq_count, GFP_KERNEL);
+ if (IS_ERR(ppc4xx_hsta_msi.irq_map)) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Setup a mapping from irq offsets to hardware irq numbers */
+ for (irq = 0; irq < irq_count; irq++) {
+ ppc4xx_hsta_msi.irq_map[irq] =
+ irq_of_parse_and_map(dev->of_node, irq);
+ if (ppc4xx_hsta_msi.irq_map[irq] == NO_IRQ) {
+ dev_err(dev, "Unable to map IRQ\n");
+ ret = -EINVAL;
+ goto out2;
+ }
+ }
+
+ ppc_md.setup_msi_irqs = hsta_setup_msi_irqs;
+ ppc_md.teardown_msi_irqs = hsta_teardown_msi_irqs;
+ ppc_md.msi_check_device = hsta_msi_check_device;
+ return 0;
+
+out2:
+ kfree(ppc4xx_hsta_msi.irq_map);
+
+out1:
+ msi_bitmap_free(&ppc4xx_hsta_msi.bmp);
+
+out:
+ iounmap(ppc4xx_hsta_msi.data);
+ return ret;
+}
+
+static const struct of_device_id hsta_msi_ids[] = {
+ {
+ .compatible = "ibm,hsta-msi",
+ },
+ {}
+};
+
+static struct platform_driver hsta_msi_driver = {
+ .probe = hsta_msi_probe,
+ .driver = {
+ .name = "hsta-msi",
+ .owner = THIS_MODULE,
+ .of_match_table = hsta_msi_ids,
+ },
+};
+
+static int hsta_msi_init(void)
+{
+ return platform_driver_register(&hsta_msi_driver);
+}
+subsys_initcall(hsta_msi_init);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 4914fd3f41eca710778ceaee742f29fee5137faf..df6e2fc4ff926c1bceeb6c978f6aef519fae5f62 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -176,8 +176,12 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
return -ENXIO;
}
- /* Check that we are fully contained within 32 bits space */
- if (res->end > 0xffffffff) {
+ /* Check that we are fully contained within 32 bits space if we are not
+ * running on a 460sx or 476fpe which have 64 bit bus addresses.
+ */
+ if (res->end > 0xffffffff &&
+ !(of_device_is_compatible(hose->dn, "ibm,plb-pciex-460sx")
+ || of_device_is_compatible(hose->dn, "ibm,plb-pciex-476fpe"))) {
printk(KERN_ERR "%s: dma-ranges outside of 32 bits space\n",
hose->dn->full_name);
return -ENXIO;
@@ -1440,7 +1444,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
#endif
#ifdef CONFIG_476FPE
- if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe"))
+ if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")
+ || of_device_is_compatible(np, "ibm,plb-pciex-476gtr"))
ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
#endif
if (ppc4xx_pciex_hwops == NULL) {
@@ -1751,7 +1756,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port,
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
| DCRO_PEGPL_OMRxMSKL_VAL);
- else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+ else if (of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476fpe") ||
+ of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476gtr"))
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
| DCRO_PEGPL_OMRxMSKL_VAL);
@@ -1881,7 +1889,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
- of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+ of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476fpe") ||
+ of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476gtr"))
sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 08504e75b2c731acd259ec5b317d97c1cdac8e12..d199bfa2f1fa5ff6610c0413ff0795d6ca42c6a7 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -419,7 +419,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
get_output_lock();
excprint(regs);
if (bp) {
- printf("cpu 0x%x stopped at breakpoint 0x%x (",
+ printf("cpu 0x%x stopped at breakpoint 0x%lx (",
cpu, BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
@@ -513,7 +513,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
excprint(regs);
bp = at_breakpoint(regs->nip);
if (bp) {
- printf("Stopped at breakpoint %x (", BP_NUM(bp));
+ printf("Stopped at breakpoint %lx (", BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
if (unrecoverable_excp(regs))
@@ -759,7 +759,7 @@ static void insert_cpu_bpts(void)
brk.address = dabr.address;
brk.type = (dabr.enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
brk.len = 8;
- set_breakpoint(&brk);
+ __set_breakpoint(&brk);
}
if (iabr && cpu_has_feature(CPU_FTR_IABR))
mtspr(SPRN_IABR, iabr->address
@@ -997,14 +997,14 @@ static int cpu_cmd(void)
last_cpu = cpu;
} else {
if (last_cpu != first_cpu)
- printf("-%lx", last_cpu);
+ printf("-0x%lx", last_cpu);
last_cpu = first_cpu = cpu;
- printf(" %lx", cpu);
+ printf(" 0x%lx", cpu);
}
}
}
if (last_cpu != first_cpu)
- printf("-%lx", last_cpu);
+ printf("-0x%lx", last_cpu);
printf("\n");
return 0;
}
@@ -1024,7 +1024,7 @@ static int cpu_cmd(void)
/* take control back */
mb();
xmon_owner = smp_processor_id();
- printf("cpu %u didn't take control\n", cpu);
+ printf("cpu 0x%x didn't take control\n", cpu);
return 0;
}
barrier();
@@ -1086,7 +1086,7 @@ csum(void)
fcs = 0xffff;
for (i = 0; i < ncsum; ++i) {
if (mread(adrs+i, &v, 1) == 0) {
- printf("csum stopped at %x\n", adrs+i);
+ printf("csum stopped at "REG"\n", adrs+i);
break;
}
fcs = FCS(fcs, v);
@@ -1202,12 +1202,12 @@ bpt_cmds(void)
/* assume a breakpoint address */
bp = at_breakpoint(a);
if (bp == NULL) {
- printf("No breakpoint at %x\n", a);
+ printf("No breakpoint at %lx\n", a);
break;
}
}
- printf("Cleared breakpoint %x (", BP_NUM(bp));
+ printf("Cleared breakpoint %lx (", BP_NUM(bp));
xmon_print_symbol(bp->address, " ", ")\n");
bp->enabled = 0;
break;
@@ -1746,7 +1746,7 @@ mwrite(unsigned long adrs, void *buf, int size)
__delay(200);
n = size;
} else {
- printf("*** Error writing address %x\n", adrs + n);
+ printf("*** Error writing address "REG"\n", adrs + n);
}
catch_memory_errors = 0;
return n;
@@ -2435,7 +2435,7 @@ static void proccall(void)
ret = func(args[0], args[1], args[2], args[3],
args[4], args[5], args[6], args[7]);
sync();
- printf("return value is %x\n", ret);
+ printf("return value is 0x%lx\n", ret);
} else {
printf("*** %x exception occurred\n", fault_except);
}
@@ -2700,7 +2700,7 @@ static void dump_slb(void)
unsigned long esid,vsid,valid;
unsigned long llp;
- printf("SLB contents of cpu %x\n", smp_processor_id());
+ printf("SLB contents of cpu 0x%x\n", smp_processor_id());
for (i = 0; i < mmu_slb_size; i++) {
asm volatile("slbmfee %0,%1" : "=r" (esid) : "r" (i));
@@ -2732,7 +2732,7 @@ static void dump_stab(void)
int i;
unsigned long *tmp = (unsigned long *)local_paca->stab_addr;
- printf("Segment table contents of cpu %x\n", smp_processor_id());
+ printf("Segment table contents of cpu 0x%x\n", smp_processor_id());
for (i = 0; i < PAGE_SIZE/16; i++) {
unsigned long a, b;
diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c
index 7fe58b0ae8b4713a5cc135cf914160fc0e9e9883..b350fb86ff08c93f9bc11c43d642d4c3feed765d 100644
--- a/drivers/macintosh/windfarm_pm121.c
+++ b/drivers/macintosh/windfarm_pm121.c
@@ -555,8 +555,18 @@ static void pm121_create_sys_fans(int loop_id)
pid_param.interval = PM121_SYS_INTERVAL;
pid_param.history_len = PM121_SYS_HISTORY_SIZE;
pid_param.itarget = param->itarget;
- pid_param.min = control->ops->get_min(control);
- pid_param.max = control->ops->get_max(control);
+ if(control)
+ {
+ pid_param.min = control->ops->get_min(control);
+ pid_param.max = control->ops->get_max(control);
+ } else {
+ /*
+ * This is probably not the right!?
+ * Perhaps goto fail if control == NULL above?
+ */
+ pid_param.min = 0;
+ pid_param.max = 0;
+ }
wf_pid_init(&pm121_sys_state[loop_id]->pid, &pid_param);
@@ -571,7 +581,7 @@ static void pm121_create_sys_fans(int loop_id)
control the same control */
printk(KERN_WARNING "pm121: failed to set up %s loop "
"setting \"%s\" to max speed.\n",
- loop_names[loop_id], control->name);
+ loop_names[loop_id], control ? control->name : "uninitialized value");
if (control)
wf_control_set_max(control);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 436a76ab4bb1925228709e40bf97aa841551bb9c..212c63d780e755eacc91d6ad163faf397fa31728 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3179,14 +3179,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
return 0;
}
-/**
- * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
- * @dev: Bridge device
- *
- * Use the bridge control register to assert reset on the secondary bus.
- * Devices on the secondary bus are left in power-on state.
- */
-void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
+void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;
@@ -3211,6 +3204,18 @@ void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
*/
ssleep(1);
}
+
+/**
+ * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
+ * @dev: Bridge device
+ *
+ * Use the bridge control register to assert reset on the secondary bus.
+ * Devices on the secondary bus are left in power-on state.
+ */
+void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
+{
+ pcibios_reset_secondary_bus(dev);
+}
EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus);
static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 316194f26ff4ab3131c6b29f939ef2209626f208..b3dbe9ef1a40ac0580905ed2812d22026850f449 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -13,7 +13,7 @@ CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CUR
export CC CFLAGS
-TARGETS = pmu copyloops
+TARGETS = pmu copyloops mm
endif
diff --git a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h
index ccd9c84c4e3f2a988a3770278dd8a0242d248fcf..d1dc37425510f73cd168dfc21d809267c7e56412 100644
--- a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h
+++ b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h
@@ -46,12 +46,15 @@
#define R20 r20
#define R21 r21
#define R22 r22
+#define R29 r29
+#define R30 r30
+#define R31 r31
#define STACKFRAMESIZE 256
-#define STK_PARAM(i) (48 + ((i)-3)*8)
#define STK_REG(i) (112 + ((i)-14)*8)
#define _GLOBAL(A) FUNC_START(test_ ## A)
+#define _GLOBAL_TOC(A) _GLOBAL(A)
#define PPC_MTOCRF(A, B) mtocrf A, B
diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..357ccbd6bad9f0e038a605b1f945b9cbba717bae
--- /dev/null
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -0,0 +1,18 @@
+noarg:
+ $(MAKE) -C ../
+
+PROGS := hugetlb_vs_thp_test
+
+all: $(PROGS)
+
+$(PROGS): ../harness.c
+
+run_tests: all
+ @-for PROG in $(PROGS); do \
+ ./$$PROG; \
+ done;
+
+clean:
+ rm -f $(PROGS)
+
+.PHONY: all run_tests clean
diff --git a/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c
new file mode 100644
index 0000000000000000000000000000000000000000..3d8e5b033e1d1e06b68a0d81fd4ef938d9260c93
--- /dev/null
+++ b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c
@@ -0,0 +1,72 @@
+#include <stdio.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#include "utils.h"
+
+/* This must match the huge page & THP size */
+#define SIZE (16 * 1024 * 1024)
+
+static int test_body(void)
+{
+ void *addr;
+ char *p;
+
+ addr = (void *)0xa0000000;
+
+ p = mmap(addr, SIZE, PROT_READ | PROT_WRITE,
+ MAP_HUGETLB | MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+ if (p != MAP_FAILED) {
+ /*
+ * Typically the mmap will fail because no huge pages are
+ * allocated on the system. But if there are huge pages
+ * allocated the mmap will succeed. That's fine too, we just
+ * munmap here before continuing.
+ */
+ munmap(addr, SIZE);
+ }
+
+ p = mmap(addr, SIZE, PROT_READ | PROT_WRITE,
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+ if (p == MAP_FAILED) {
+ printf("Mapping failed @ %p\n", addr);
+ perror("mmap");
+ return 1;
+ }
+
+ /*
+ * Either a user or kernel access is sufficient to trigger the bug.
+ * A kernel access is easier to spot & debug, as it will trigger the
+ * softlockup or RCU stall detectors, and when the system is kicked
+ * into xmon we get a backtrace in the kernel.
+ *
+ * A good option is:
+ * getcwd(p, SIZE);
+ *
+ * For the purposes of this testcase it's preferable to spin in
+ * userspace, so the harness can kill us if we get stuck. That way we
+ * see a test failure rather than a dead system.
+ */
+ *p = 0xf;
+
+ munmap(addr, SIZE);
+
+ return 0;
+}
+
+static int test_main(void)
+{
+ int i;
+
+ /* 10,000 because it's a "bunch", and completes reasonably quickly */
+ for (i = 0; i < 10000; i++)
+ if (test_body())
+ return 1;
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(test_main, "hugetlb_vs_thp");
+}