diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 4ff8cbb620d3204e84a7afbb6925ed7faf055812..f833aa271a2e2306877cf3624157eaa189615702 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -214,12 +214,14 @@ config PHY_QCOM_IPQ806X_SATA
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
+ depends on MACH_SPEAR1310 || COMPILE_TEST
help
Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
config PHY_ST_SPEAR1340_MIPHY
tristate "ST SPEAR1340-MIPHY driver"
select GENERIC_PHY
+ depends on MACH_SPEAR1340 || COMPILE_TEST
help
Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
index e111baf187ce2d4a37484601e41fa29ca7e757bb..e0fb7a1e5a5a9c9cf0be5fc109ba09556cb35593 100644
--- a/drivers/phy/phy-miphy365x.c
+++ b/drivers/phy/phy-miphy365x.c
@@ -163,6 +163,7 @@ enum miphy_sata_gen {
};
static u8 rx_tx_spd[] = {
+ 0, /* GEN0 doesn't exist. */
TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL,
TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL,
TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 81cda09b47e3127772e51cbc5c57eab7761c4a52..488a30836c36cbee57f2e16f7813db7075891699 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -965,8 +965,6 @@ rescan:
}
qh->exception = 1;
- if (ehci->rh_state < EHCI_RH_RUNNING)
- qh->qh_state = QH_STATE_IDLE;
switch (qh->qh_state) {
case QH_STATE_LINKED:
WARN_ON(!list_empty(&qh->qtd_list));
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 60cfcbc78552ceef5e9876610d30647d1aa67884..4a5c68a47e46f90a53c25a299d90a93170ffd825 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -101,6 +101,12 @@ UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
"PhotoSmart R707",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999,
+ "Adaptec",
+ "USBConnect 2000",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
* and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
@@ -1125,6 +1131,18 @@ UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
+UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB-SCSI (Mac USB Dock)",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
@@ -1964,6 +1982,14 @@ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
+ "Entrega Technologies",
+ "USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Robert Schedel <r.schedel@yahoo.de>
* Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
@@ -1986,6 +2012,12 @@ UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999,
+ "Ariston Technologies",
+ "iConnect USB to SCSI adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Hans de Goede <hdegoede@redhat.com>
* These Appotech controllers are found in Picture Frames, they provide a
* (buggy) emulation of a cdrom drive which contains the windows software