diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4c81a860cc2bcd31d58e13e8b9539744a241adcc..479f33204a3727a51ece7ba2cc2b747e27788e36 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3621,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
-			scanned for Logical Units (default 5).
+			scanned for Logical Units (default 1).
 
 	usb-storage.quirks=
 			[UMS] A list of quirks entries to supplement or
diff --git a/MAINTAINERS b/MAINTAINERS
index 5d6136b8959e0bdb69e608026384c29bbc550386..a0d386e234ed1b61f34e3c3801a4bed37a187e06 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9703,11 +9703,6 @@ S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
-USB/IP DRIVERS
-L:	linux-usb@vger.kernel.org
-S:	Orphan
-F:	drivers/staging/usbip/
-
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 8c842980834a2cebb40a77d31bc30f5f6ed643ae..f091576b644903a2ab1320550c090479a6f8d56c 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -258,14 +258,16 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	otg->phy		= &phy->phy;
 
 	platform_set_drvdata(pdev, phy);
+	pm_runtime_enable(phy->dev);
 
 	generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL);
-	if (IS_ERR(generic_phy))
+	if (IS_ERR(generic_phy)) {
+		pm_runtime_disable(phy->dev);
 		return PTR_ERR(generic_phy);
+	}
 
 	phy_set_drvdata(generic_phy, phy);
 
-	pm_runtime_enable(phy->dev);
 	phy_provider = devm_of_phy_provider_register(phy->dev,
 			of_phy_simple_xlate);
 	if (IS_ERR(phy_provider)) {
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e934e19f49f57e3e463c31c65caa76cca3fee905..077d58ac3dcba6db7b4ed554cac493e74a6de71a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -60,6 +60,9 @@ static struct acm *acm_table[ACM_TTY_MINORS];
 
 static DEFINE_MUTEX(acm_table_lock);
 
+static void acm_tty_set_termios(struct tty_struct *tty,
+				struct ktermios *termios_old);
+
 /*
  * acm_table accessors
  */
@@ -145,8 +148,15 @@ static int acm_ctrl_msg(struct acm *acm, int request, int value,
 /* devices aren't required to support these requests.
  * the cdc acm descriptor tells whether they do...
  */
-#define acm_set_control(acm, control) \
-	acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0)
+static inline int acm_set_control(struct acm *acm, int control)
+{
+	if (acm->quirks & QUIRK_CONTROL_LINE_STATE)
+		return -EOPNOTSUPP;
+
+	return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+			control, NULL, 0);
+}
+
 #define acm_set_line(acm, line) \
 	acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line))
 #define acm_send_break(acm, ms) \
@@ -554,6 +564,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
 		goto error_submit_urb;
 	}
 
+	acm_tty_set_termios(tty, NULL);
+
 	/*
 	 * Unthrottle device in case the TTY was closed while throttled.
 	 */
@@ -980,11 +992,12 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
-	if (!newline.dwDTERate) {
+	if (C_BAUD(tty) == B0) {
 		newline.dwDTERate = acm->line.dwDTERate;
 		newctrl &= ~ACM_CTRL_DTR;
-	} else
+	} else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
 		newctrl |=  ACM_CTRL_DTR;
+	}
 
 	if (newctrl != acm->ctrlout)
 		acm_set_control(acm, acm->ctrlout = newctrl);
@@ -1314,6 +1327,7 @@ made_compressed_probe:
 	tty_port_init(&acm->port);
 	acm->port.ops = &acm_port_ops;
 	init_usb_anchor(&acm->delayed);
+	acm->quirks = quirks;
 
 	buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
@@ -1681,6 +1695,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
+	.driver_info = QUIRK_CONTROL_LINE_STATE, },
+	{ USB_DEVICE(0x2184, 0x001c) },	/* GW Instek AFG-2225 */
 	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
 	},
 	/* Motorola H24 HSPA module: */
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index fc75651afe1c9cda8983aa82dfa8b81cfa3fb5bf..d3251ebd09e2e0bc46effe8b77503c524d12a7d4 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -121,6 +121,7 @@ struct acm {
 	unsigned int throttle_req:1;			/* throttle requested */
 	u8 bInterval;
 	struct usb_anchor delayed;			/* writes queued for a device about to be woken */
+	unsigned long quirks;
 };
 
 #define CDC_DATA_INTERFACE_TYPE	0x0a
@@ -132,3 +133,4 @@ struct acm {
 #define NOT_A_MODEM			BIT(3)
 #define NO_DATA_INTERFACE		BIT(4)
 #define IGNORE_DEVICE			BIT(5)
+#define QUIRK_CONTROL_LINE_STATE	BIT(6)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index b84fb141e122f7f0d60d9e4ba09642c7c9e15492..a6efb4184f2b4cf0a021b457b8e1d4fcccb30d56 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2060,6 +2060,8 @@ int usb_alloc_streams(struct usb_interface *interface,
 		return -EINVAL;
 	if (dev->speed != USB_SPEED_SUPER)
 		return -EINVAL;
+	if (dev->state < USB_STATE_CONFIGURED)
+		return -ENODEV;
 
 	for (i = 0; i < num_eps; i++) {
 		/* Streams only apply to bulk endpoints. */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 11e80ac313244289e3a7425fb16acc6b0c0e562e..b649fef2e35d4af1e9e8a206e73c0ed799049a1b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4468,9 +4468,6 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
-	if (hcd->usb_phy && !hdev->parent)
-		usb_phy_notify_connect(hcd->usb_phy, udev->speed);
-
 	/*
 	 * Some superspeed devices have finished the link training process
 	 * and attached to a superspeed hub port, but the device descriptor
@@ -4627,8 +4624,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 
 	/* Disconnect any existing devices under this port */
 	if (udev) {
-		if (hcd->usb_phy && !hdev->parent &&
-				!(portstatus & USB_PORT_STAT_CONNECTION))
+		if (hcd->usb_phy && !hdev->parent)
 			usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
 		usb_disconnect(&port_dev->child);
 	}
@@ -4783,6 +4779,10 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 				port_dev->child = NULL;
 				spin_unlock_irq(&device_state_lock);
 				mutex_unlock(&usb_port_peer_mutex);
+			} else {
+				if (hcd->usb_phy && !hdev->parent)
+					usb_phy_notify_connect(hcd->usb_phy,
+							udev->speed);
 			}
 		}
 
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 5ae883dc21f50f1b4e47fb68fa3255fea1940aa1..39b4081b632df2ce600501add8c011c7dbde75b3 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -97,6 +97,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
 			USB_QUIRK_DEVICE_QUALIFIER },
 
+	{ USB_DEVICE(0x04f3, 0x009b), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index eee87098bb8b947458383ab3cc425458a598dae9..8b5c079c7b7dde3fb1eb0e9739e117a835c23176 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2327,7 +2327,7 @@ irq_retry:
 
 		u32 usb_status = readl(hsotg->regs + GOTGCTL);
 
-		dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+		dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
 		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
 			readl(hsotg->regs + GNPTXSTS));
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a8a30b1d416761cf004bb760d14125f1a1ffa5b9..a3ca1375dd522bea2998ab4e44f5ab662217be69 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -234,7 +234,7 @@ config USB_EHCI_SH
 
 config USB_EHCI_EXYNOS
        tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
-       depends on PLAT_S5P || ARCH_EXYNOS
+       depends on ARCH_S5PV210 || ARCH_EXYNOS
        help
 	Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
 
@@ -550,7 +550,7 @@ config USB_OHCI_SH
 
 config USB_OHCI_EXYNOS
 	tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
-	depends on PLAT_S5P || ARCH_EXYNOS
+	depends on ARCH_S5PV210 || ARCH_EXYNOS
 	help
 	 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
 
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index d0d8fadf706610ca6483cd1cea19583f6fffbf1f..1db0626c8bf415289fd7e8f0875e15e4aeff404e 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -607,7 +607,7 @@ found:
 	wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
 	if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100)
 		dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
-			 le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8,
+			 (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8,
 			 le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff);
 	result = 0;
 error:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 280dde93abe528ba61e98fa4790c1fada555794f..9a69b1f1b300889d56200ac35d6d1cf22195c588 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -127,20 +127,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 		xhci->quirks |= XHCI_AVOID_BEI;
 	}
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-	    (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) {
-		/* Workaround for occasional spurious wakeups from S5 (or
-		 * any other sleep) on Haswell machines with LPT and LPT-LP
-		 * with the new Intel BIOS
-		 */
-		/* Limit the quirk to only known vendors, as this triggers
-		 * yet another BIOS bug on some other machines
-		 * https://bugzilla.kernel.org/show_bug.cgi?id=66171
-		 */
-		if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
-			xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
-	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
@@ -162,6 +148,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 			pdev->device == 0x3432)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+			pdev->device == 0x1042)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"QUIRK: Resetting on resume");
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 3d2bd65df0fc71e05ca330a136b8c51280f9ab3d..02c420af251e27bb2cb3c4475343b8a869ae1ef5 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -335,7 +335,8 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			port->interrupt_out_urb->transfer_buffer_length = length;
 
 			priv->cur_pos = priv->cur_pos + length;
-			result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
+			result = usb_submit_urb(port->interrupt_out_urb,
+					GFP_ATOMIC);
 			dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
 			todo = priv->filled - priv->cur_pos;
 
@@ -350,7 +351,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 		if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
 			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
 			result = usb_submit_urb(port->interrupt_in_urb,
-								GFP_NOIO);
+					GFP_ATOMIC);
 			dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
 		}
 	}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4856fb7e637e70ffcc5f4da4cdb6536588b3aa95..4b7bfb394a32aba025e8e07ad3384759ea1723d8 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -215,7 +215,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	/* The connected devices do not have a bulk write endpoint,
 	 * to transmit data to de barcode device the control endpoint is used */
-	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
 	if (!dr) {
 		count = -ENOMEM;
 		goto error_no_dr;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 4bc2fc98636ed27f65ec8425c6a3e583e580174e..73f125e0cb587015eb282dfef0f5eaadea273ed5 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -52,7 +52,7 @@ int usb_stor_euscsi_init(struct us_data *us)
 	us->iobuf[0] = 0x1;
 	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
 			0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
-			0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT);
+			0x01, 0x0, us->iobuf, 0x1, 5 * HZ);
 	usb_stor_dbg(us, "-- result is %d\n", result);
 
 	return 0;
@@ -100,7 +100,7 @@ int usb_stor_huawei_e220_init(struct us_data *us)
 	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
 				      USB_REQ_SET_FEATURE,
 				      USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-				      0x01, 0x0, NULL, 0x0, 1000);
+				      0x01, 0x0, NULL, 0x0, 1 * HZ);
 	usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
 	return 0;
 }
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 8591d89a38e666b3043932c7da08a8fc4d27e350..27e4a580d2ed2fddb97e543ce5aafbd4f6280032 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -626,6 +626,7 @@ static int config_autodelink_after_power_on(struct us_data *us)
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int config_autodelink_before_power_down(struct us_data *us)
 {
 	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
@@ -716,6 +717,7 @@ static void fw5895_init(struct us_data *us)
 		}
 	}
 }
+#endif
 
 #ifdef CONFIG_REALTEK_AUTOPM
 static void fw5895_set_mmc_wp(struct us_data *us)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 22c7d4360fa222722369b6861da34bafdd4b5b96..b1d815eb6d0bb34d8edeff31581eafd1ad983a0c 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1118,6 +1118,31 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 		 */
 		if (result == USB_STOR_XFER_LONG)
 			fake_sense = 1;
+
+		/*
+		 * Sometimes a device will mistakenly skip the data phase
+		 * and go directly to the status phase without sending a
+		 * zero-length packet.  If we get a 13-byte response here,
+		 * check whether it really is a CSW.
+		 */
+		if (result == USB_STOR_XFER_SHORT &&
+				srb->sc_data_direction == DMA_FROM_DEVICE &&
+				transfer_length - scsi_get_resid(srb) ==
+					US_BULK_CS_WRAP_LEN) {
+			struct scatterlist *sg = NULL;
+			unsigned int offset = 0;
+
+			if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+					US_BULK_CS_WRAP_LEN, srb, &sg,
+					&offset, FROM_XFER_BUF) ==
+						US_BULK_CS_WRAP_LEN &&
+					bcs->Signature ==
+						cpu_to_le32(US_BULK_CS_SIGN)) {
+				usb_stor_dbg(us, "Device skipped data phase\n");
+				scsi_set_resid(srb, transfer_length);
+				goto skipped_data_phase;
+			}
+		}
 	}
 
 	/* See flow chart on pg 15 of the Bulk Only Transport spec for
@@ -1153,6 +1178,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
+ skipped_data_phase:
 	/* check bulk status */
 	residue = le32_to_cpu(bcs->Residue);
 	usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 8511b54a65d9665e51f1a0cc808b4535b611ba97..2fefaf923e4a2ecc6e3fd39b32f05631478806ed 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -54,6 +54,20 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
+		"Seagate",
+		"Expansion Desk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */
+UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999,
+		"Seagate",
+		"Backup Plus",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /* https://bbs.archlinux.org/viewtopic.php?id=183190 */
 UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
 		"Seagate",
@@ -61,6 +75,13 @@ UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
+		"Seagate",
+		"Backup+ BK",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
 UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
 		"JMicron",
@@ -75,3 +96,10 @@ UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999,
 		"ASM1051",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_UAS),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
+		"VIA",
+		"VL711",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),