diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index 42c97426836eaf50fbccb2271d1d719c5918fa06..03025d97998b48276ceec27adaa230debd9febfa 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -6,7 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
 Required properties:
  - compatible: compatible list, contains
 	       "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
-	       "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
+	       "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
 
  - reg: offset and length of the PHY register set.
  - #phy-cells: must be 0.
@@ -27,6 +27,27 @@ Optional properties:
 		tuning parameter value for qusb2 phy.
 
  - qcom,tcsr-syscon: Phandle to TCSR syscon register region.
+ - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be
+		added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
+		tuning parameter that may vary for different boards of same SOC.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+ - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX
+		output current.
+		Possible range is - 15mA to 24mA (stepsize of 600 uA).
+		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+		Default value is 22.2mA for sdm845.
+ - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level.
+		Possible range is 0 to 15% (stepsize of 5%).
+		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+		Default value is 10% for sdm845.
+- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX
+		pre-emphasis (specified using qcom,preemphasis-level) must be in
+		effect. Duration could be half-bit of full-bit.
+		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+		Default value is full-bit width for sdm845.
 
 Example:
 	hsusb_phy: phy@7411000 {
diff --git a/include/dt-bindings/phy/phy-qcom-qusb2.h b/include/dt-bindings/phy/phy-qcom-qusb2.h
new file mode 100644
index 0000000000000000000000000000000000000000..5c5e4d800cacca2a09a1fd4aac7b31e2586ffe82
--- /dev/null
+++ b/include/dt-bindings/phy/phy-qcom-qusb2.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_QCOM_PHY_QUSB2_H_
+#define _DT_BINDINGS_QCOM_PHY_QUSB2_H_
+
+/* PHY HSTX TRIM bit values (24mA to 15mA) */
+#define QUSB2_V2_HSTX_TRIM_24_0_MA		0x0
+#define QUSB2_V2_HSTX_TRIM_23_4_MA		0x1
+#define QUSB2_V2_HSTX_TRIM_22_8_MA		0x2
+#define QUSB2_V2_HSTX_TRIM_22_2_MA		0x3
+#define QUSB2_V2_HSTX_TRIM_21_6_MA		0x4
+#define QUSB2_V2_HSTX_TRIM_21_0_MA		0x5
+#define QUSB2_V2_HSTX_TRIM_20_4_MA		0x6
+#define QUSB2_V2_HSTX_TRIM_19_8_MA		0x7
+#define QUSB2_V2_HSTX_TRIM_19_2_MA		0x8
+#define QUSB2_V2_HSTX_TRIM_18_6_MA		0x9
+#define QUSB2_V2_HSTX_TRIM_18_0_MA		0xa
+#define QUSB2_V2_HSTX_TRIM_17_4_MA		0xb
+#define QUSB2_V2_HSTX_TRIM_16_8_MA		0xc
+#define QUSB2_V2_HSTX_TRIM_16_2_MA		0xd
+#define QUSB2_V2_HSTX_TRIM_15_6_MA		0xe
+#define QUSB2_V2_HSTX_TRIM_15_0_MA		0xf
+
+/* PHY PREEMPHASIS bit values */
+#define QUSB2_V2_PREEMPHASIS_NONE		0
+#define QUSB2_V2_PREEMPHASIS_5_PERCENT		1
+#define QUSB2_V2_PREEMPHASIS_10_PERCENT		2
+#define QUSB2_V2_PREEMPHASIS_15_PERCENT		3
+
+/* PHY PREEMPHASIS-WIDTH bit values */
+#define QUSB2_V2_PREEMPHASIS_WIDTH_FULL_BIT	0
+#define QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT	1
+
+#endif