diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 30b60855fbcd1e353d4dbd687d480a52f4811761..c89a4314c56338cbe60be29d9d9f07e150c9a8f9 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
 obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
+i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o
 obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
 i2c-designware-platform-objs := i2c-designware-platdrv.o
 i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
new file mode 100644
index 0000000000000000000000000000000000000000..0d0ccb73f0e66006533088439c03b5aa185a8915
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -0,0 +1,275 @@
+/*
+ * Synopsys DesignWare I2C adapter driver.
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static char *abort_sources[] = {
+	[ABRT_7B_ADDR_NOACK] =
+		"slave address not acknowledged (7bit mode)",
+	[ABRT_10ADDR1_NOACK] =
+		"first address byte not acknowledged (10bit mode)",
+	[ABRT_10ADDR2_NOACK] =
+		"second address byte not acknowledged (10bit mode)",
+	[ABRT_TXDATA_NOACK] =
+		"data not acknowledged",
+	[ABRT_GCALL_NOACK] =
+		"no acknowledgement for a general call",
+	[ABRT_GCALL_READ] =
+		"read after general call",
+	[ABRT_SBYTE_ACKDET] =
+		"start byte acknowledged",
+	[ABRT_SBYTE_NORSTRT] =
+		"trying to send start byte when restart is disabled",
+	[ABRT_10B_RD_NORSTRT] =
+		"trying to read when restart is disabled (10bit mode)",
+	[ABRT_MASTER_DIS] =
+		"trying to use disabled adapter",
+	[ARB_LOST] =
+		"lost arbitration",
+};
+
+u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+	u32 value;
+
+	if (dev->flags & ACCESS_16BIT)
+		value = readw_relaxed(dev->base + offset) |
+			(readw_relaxed(dev->base + offset + 2) << 16);
+	else
+		value = readl_relaxed(dev->base + offset);
+
+	if (dev->flags & ACCESS_SWAP)
+		return swab32(value);
+	else
+		return value;
+}
+
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+	if (dev->flags & ACCESS_SWAP)
+		b = swab32(b);
+
+	if (dev->flags & ACCESS_16BIT) {
+		writew_relaxed((u16)b, dev->base + offset);
+		writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
+	} else {
+		writel_relaxed(b, dev->base + offset);
+	}
+}
+
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
+{
+	/*
+	 * DesignWare I2C core doesn't seem to have solid strategy to meet
+	 * the tHD;STA timing spec.  Configuring _HCNT based on tHIGH spec
+	 * will result in violation of the tHD;STA spec.
+	 */
+	if (cond)
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
+		 *
+		 * This is based on the DW manuals, and represents an ideal
+		 * configuration.  The resulting I2C bus speed will be
+		 * faster than any of the others.
+		 *
+		 * If your hardware is free from tHD;STA issue, try this one.
+		 */
+		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
+	else
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
+		 *
+		 * This is just experimental rule; the tHD;STA period turned
+		 * out to be proportinal to (_HCNT + 3).  With this setting,
+		 * we could meet both tHIGH and tHD;STA timing specs.
+		 *
+		 * If unsure, you'd better to take this alternative.
+		 *
+		 * The reason why we need to take into account "tf" here,
+		 * is the same as described in i2c_dw_scl_lcnt().
+		 */
+		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
+			- 3 + offset;
+}
+
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
+{
+	/*
+	 * Conditional expression:
+	 *
+	 *   IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
+	 *
+	 * DW I2C core starts counting the SCL CNTs for the LOW period
+	 * of the SCL clock (tLOW) as soon as it pulls the SCL line.
+	 * In order to meet the tLOW timing spec, we need to take into
+	 * account the fall time of SCL signal (tf).  Default tf value
+	 * should be 0.3 us, for safety.
+	 */
+	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
+}
+
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
+{
+	dw_writel(dev, enable, DW_IC_ENABLE);
+}
+
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+{
+	int timeout = 100;
+
+	do {
+		__i2c_dw_enable(dev, enable);
+		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+			return;
+
+		/*
+		 * Wait 10 times the signaling period of the highest I2C
+		 * transfer supported by the driver (for 400KHz this is
+		 * 25us) as described in the DesignWare I2C databook.
+		 */
+		usleep_range(25, 250);
+	} while (timeout--);
+
+	dev_warn(dev->dev, "timeout in %sabling adapter\n",
+		 enable ? "en" : "dis");
+}
+
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
+{
+	/*
+	 * Clock is not necessary if we got LCNT/HCNT values directly from
+	 * the platform code.
+	 */
+	if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
+		return 0;
+	return dev->get_clk_rate_khz(dev);
+}
+
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	if (!dev->acquire_lock)
+		return 0;
+
+	ret = dev->acquire_lock(dev);
+	if (!ret)
+		return 0;
+
+	dev_err(dev->dev, "couldn't acquire bus ownership\n");
+
+	return ret;
+}
+
+void i2c_dw_release_lock(struct dw_i2c_dev *dev)
+{
+	if (dev->release_lock)
+		dev->release_lock(dev);
+}
+
+/*
+ * Waiting for bus not busy
+ */
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
+{
+	int timeout = TIMEOUT;
+
+	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+		if (timeout <= 0) {
+			dev_warn(dev->dev, "timeout waiting for bus ready\n");
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		usleep_range(1000, 1100);
+	}
+
+	return 0;
+}
+
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
+{
+	unsigned long abort_source = dev->abort_source;
+	int i;
+
+	if (abort_source & DW_IC_TX_ABRT_NOACK) {
+		for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+			dev_dbg(dev->dev,
+				"%s: %s\n", __func__, abort_sources[i]);
+		return -EREMOTEIO;
+	}
+
+	for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+		dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+
+	if (abort_source & DW_IC_TX_ARB_LOST)
+		return -EAGAIN;
+	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+		return -EINVAL; /* wrong msgs[] data */
+	else
+		return -EIO;
+}
+
+u32 i2c_dw_func(struct i2c_adapter *adap)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	return dev->functionality;
+}
+
+void i2c_dw_disable(struct dw_i2c_dev *dev)
+{
+	/* Disable controller */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* Disable all interupts */
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+	dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+	return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
+
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index fe9b66898a7250207958e4469d66d3aade523dde..661cfa869ff7a5a6ee546c322a074d07a41ae406 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -41,6 +41,124 @@
 #define DW_IC_CON_RESTART_EN		0x20
 #define DW_IC_CON_SLAVE_DISABLE		0x40
 
+/*
+ * Registers offset
+ */
+#define DW_IC_CON		0x0
+#define DW_IC_TAR		0x4
+#define DW_IC_DATA_CMD		0x10
+#define DW_IC_SS_SCL_HCNT	0x14
+#define DW_IC_SS_SCL_LCNT	0x18
+#define DW_IC_FS_SCL_HCNT	0x1c
+#define DW_IC_FS_SCL_LCNT	0x20
+#define DW_IC_HS_SCL_HCNT	0x24
+#define DW_IC_HS_SCL_LCNT	0x28
+#define DW_IC_INTR_STAT		0x2c
+#define DW_IC_INTR_MASK		0x30
+#define DW_IC_RAW_INTR_STAT	0x34
+#define DW_IC_RX_TL		0x38
+#define DW_IC_TX_TL		0x3c
+#define DW_IC_CLR_INTR		0x40
+#define DW_IC_CLR_RX_UNDER	0x44
+#define DW_IC_CLR_RX_OVER	0x48
+#define DW_IC_CLR_TX_OVER	0x4c
+#define DW_IC_CLR_RD_REQ	0x50
+#define DW_IC_CLR_TX_ABRT	0x54
+#define DW_IC_CLR_RX_DONE	0x58
+#define DW_IC_CLR_ACTIVITY	0x5c
+#define DW_IC_CLR_STOP_DET	0x60
+#define DW_IC_CLR_START_DET	0x64
+#define DW_IC_CLR_GEN_CALL	0x68
+#define DW_IC_ENABLE		0x6c
+#define DW_IC_STATUS		0x70
+#define DW_IC_TXFLR		0x74
+#define DW_IC_RXFLR		0x78
+#define DW_IC_SDA_HOLD		0x7c
+#define DW_IC_TX_ABRT_SOURCE	0x80
+#define DW_IC_ENABLE_STATUS	0x9c
+#define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_VERSION	0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
+#define DW_IC_COMP_TYPE		0xfc
+#define DW_IC_COMP_TYPE_VALUE	0x44570140
+
+#define DW_IC_INTR_RX_UNDER	0x001
+#define DW_IC_INTR_RX_OVER	0x002
+#define DW_IC_INTR_RX_FULL	0x004
+#define DW_IC_INTR_TX_OVER	0x008
+#define DW_IC_INTR_TX_EMPTY	0x010
+#define DW_IC_INTR_RD_REQ	0x020
+#define DW_IC_INTR_TX_ABRT	0x040
+#define DW_IC_INTR_RX_DONE	0x080
+#define DW_IC_INTR_ACTIVITY	0x100
+#define DW_IC_INTR_STOP_DET	0x200
+#define DW_IC_INTR_START_DET	0x400
+#define DW_IC_INTR_GEN_CALL	0x800
+
+#define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
+					 DW_IC_INTR_TX_ABRT | \
+					 DW_IC_INTR_STOP_DET)
+#define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MASK | \
+					 DW_IC_INTR_TX_EMPTY)
+#define DW_IC_STATUS_ACTIVITY		0x1
+#define DW_IC_STATUS_TFE		BIT(2)
+#define DW_IC_STATUS_MASTER_ACTIVITY	BIT(5)
+
+#define DW_IC_SDA_HOLD_RX_SHIFT		16
+#define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
+
+#define DW_IC_ERR_TX_ABRT	0x1
+
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
+
+/*
+ * Status codes
+ */
+#define STATUS_IDLE			0x0
+#define STATUS_WRITE_IN_PROGRESS	0x1
+#define STATUS_READ_IN_PROGRESS		0x2
+
+#define TIMEOUT			20 /* ms */
+
+/*
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * Only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK	0
+#define ABRT_10ADDR1_NOACK	1
+#define ABRT_10ADDR2_NOACK	2
+#define ABRT_TXDATA_NOACK	3
+#define ABRT_GCALL_NOACK	4
+#define ABRT_GCALL_READ		5
+#define ABRT_SBYTE_ACKDET	7
+#define ABRT_SBYTE_NORSTRT	9
+#define ABRT_10B_RD_NORSTRT	10
+#define ABRT_MASTER_DIS		11
+#define ARB_LOST		12
+
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK	(1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK	(1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK	(1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ	(1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET	(1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT	(1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
+
+#define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR2_NOACK | \
+					 DW_IC_TX_ABRT_TXDATA_NOACK | \
+					 DW_IC_TX_ABRT_GCALL_NOACK)
+
 
 /**
  * struct dw_i2c_dev - private i2c-designware data
@@ -80,6 +198,9 @@
  * @acquire_lock: function to acquire a hardware lock on the bus
  * @release_lock: function to release a hardware lock on the bus
  * @pm_disabled: true if power-management should be disabled for this i2c-bus
+ * @disable: function to disable the controller
+ * @disable_int: function to disable all interrupts
+ * @init: function to initialize the I2C hardware
  *
  * HCNT and LCNT parameters can be used if the platform knows more accurate
  * values than the one computed based only on the input clock frequency.
@@ -129,6 +250,9 @@ struct dw_i2c_dev {
 	int			(*acquire_lock)(struct dw_i2c_dev *dev);
 	void			(*release_lock)(struct dw_i2c_dev *dev);
 	bool			pm_disabled;
+	void			(*disable)(struct dw_i2c_dev *dev);
+	void			(*disable_int)(struct dw_i2c_dev *dev);
+	int			(*init)(struct dw_i2c_dev *dev);
 };
 
 #define ACCESS_SWAP		0x00000001
@@ -137,9 +261,22 @@ struct dw_i2c_dev {
 
 #define MODEL_CHERRYTRAIL	0x00000100
 
-extern int i2c_dw_init(struct dw_i2c_dev *dev);
-extern void i2c_dw_disable(struct dw_i2c_dev *dev);
-extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+u32 dw_readl(struct dw_i2c_dev *dev, int offset);
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable);
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable);
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
+void i2c_dw_release_lock(struct dw_i2c_dev *dev);
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
+u32 i2c_dw_func(struct i2c_adapter *adap);
+void i2c_dw_disable(struct dw_i2c_dev *dev);
+void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+int i2c_dw_init(struct dw_i2c_dev *dev);
+
 extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
 extern int i2c_dw_probe(struct dw_i2c_dev *dev);
 
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-master.c
similarity index 65%
rename from drivers/i2c/busses/i2c-designware-core.c
rename to drivers/i2c/busses/i2c-designware-master.c
index e8a7621c187e45acf2afdec983039815474f79f9..eefc4db1ee3e2467d33e96f4d4149dd724153a54 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -22,9 +22,9 @@
  *
  */
 #include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -32,175 +32,6 @@
 #include <linux/pm_runtime.h>
 
 #include "i2c-designware-core.h"
-/*
- * Registers offset
- */
-#define DW_IC_CON		0x0
-#define DW_IC_TAR		0x4
-#define DW_IC_DATA_CMD		0x10
-#define DW_IC_SS_SCL_HCNT	0x14
-#define DW_IC_SS_SCL_LCNT	0x18
-#define DW_IC_FS_SCL_HCNT	0x1c
-#define DW_IC_FS_SCL_LCNT	0x20
-#define DW_IC_HS_SCL_HCNT	0x24
-#define DW_IC_HS_SCL_LCNT	0x28
-#define DW_IC_INTR_STAT		0x2c
-#define DW_IC_INTR_MASK		0x30
-#define DW_IC_RAW_INTR_STAT	0x34
-#define DW_IC_RX_TL		0x38
-#define DW_IC_TX_TL		0x3c
-#define DW_IC_CLR_INTR		0x40
-#define DW_IC_CLR_RX_UNDER	0x44
-#define DW_IC_CLR_RX_OVER	0x48
-#define DW_IC_CLR_TX_OVER	0x4c
-#define DW_IC_CLR_RD_REQ	0x50
-#define DW_IC_CLR_TX_ABRT	0x54
-#define DW_IC_CLR_RX_DONE	0x58
-#define DW_IC_CLR_ACTIVITY	0x5c
-#define DW_IC_CLR_STOP_DET	0x60
-#define DW_IC_CLR_START_DET	0x64
-#define DW_IC_CLR_GEN_CALL	0x68
-#define DW_IC_ENABLE		0x6c
-#define DW_IC_STATUS		0x70
-#define DW_IC_TXFLR		0x74
-#define DW_IC_RXFLR		0x78
-#define DW_IC_SDA_HOLD		0x7c
-#define DW_IC_TX_ABRT_SOURCE	0x80
-#define DW_IC_ENABLE_STATUS	0x9c
-#define DW_IC_COMP_PARAM_1	0xf4
-#define DW_IC_COMP_VERSION	0xf8
-#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
-#define DW_IC_COMP_TYPE		0xfc
-#define DW_IC_COMP_TYPE_VALUE	0x44570140
-
-#define DW_IC_INTR_RX_UNDER	0x001
-#define DW_IC_INTR_RX_OVER	0x002
-#define DW_IC_INTR_RX_FULL	0x004
-#define DW_IC_INTR_TX_OVER	0x008
-#define DW_IC_INTR_TX_EMPTY	0x010
-#define DW_IC_INTR_RD_REQ	0x020
-#define DW_IC_INTR_TX_ABRT	0x040
-#define DW_IC_INTR_RX_DONE	0x080
-#define DW_IC_INTR_ACTIVITY	0x100
-#define DW_IC_INTR_STOP_DET	0x200
-#define DW_IC_INTR_START_DET	0x400
-#define DW_IC_INTR_GEN_CALL	0x800
-
-#define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
-					 DW_IC_INTR_TX_ABRT | \
-					 DW_IC_INTR_STOP_DET)
-#define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MASK | \
-					 DW_IC_INTR_TX_EMPTY)
-#define DW_IC_STATUS_ACTIVITY	0x1
-
-#define DW_IC_SDA_HOLD_RX_SHIFT		16
-#define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
-
-#define DW_IC_ERR_TX_ABRT	0x1
-
-#define DW_IC_TAR_10BITADDR_MASTER		BIT(12)
-
-#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
-#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
-
-/*
- * status codes
- */
-#define STATUS_IDLE			0x0
-#define STATUS_WRITE_IN_PROGRESS	0x1
-#define STATUS_READ_IN_PROGRESS		0x2
-
-#define TIMEOUT			20 /* ms */
-
-/*
- * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
- *
- * Only expected abort codes are listed here,
- * refer to the datasheet for the full list.
- */
-#define ABRT_7B_ADDR_NOACK	0
-#define ABRT_10ADDR1_NOACK	1
-#define ABRT_10ADDR2_NOACK	2
-#define ABRT_TXDATA_NOACK	3
-#define ABRT_GCALL_NOACK	4
-#define ABRT_GCALL_READ		5
-#define ABRT_SBYTE_ACKDET	7
-#define ABRT_SBYTE_NORSTRT	9
-#define ABRT_10B_RD_NORSTRT	10
-#define ABRT_MASTER_DIS		11
-#define ARB_LOST		12
-
-#define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL << ABRT_7B_ADDR_NOACK)
-#define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL << ABRT_10ADDR1_NOACK)
-#define DW_IC_TX_ABRT_10ADDR2_NOACK	(1UL << ABRT_10ADDR2_NOACK)
-#define DW_IC_TX_ABRT_TXDATA_NOACK	(1UL << ABRT_TXDATA_NOACK)
-#define DW_IC_TX_ABRT_GCALL_NOACK	(1UL << ABRT_GCALL_NOACK)
-#define DW_IC_TX_ABRT_GCALL_READ	(1UL << ABRT_GCALL_READ)
-#define DW_IC_TX_ABRT_SBYTE_ACKDET	(1UL << ABRT_SBYTE_ACKDET)
-#define DW_IC_TX_ABRT_SBYTE_NORSTRT	(1UL << ABRT_SBYTE_NORSTRT)
-#define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL << ABRT_10B_RD_NORSTRT)
-#define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
-#define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
-
-#define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
-					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
-					 DW_IC_TX_ABRT_10ADDR2_NOACK | \
-					 DW_IC_TX_ABRT_TXDATA_NOACK | \
-					 DW_IC_TX_ABRT_GCALL_NOACK)
-
-static char *abort_sources[] = {
-	[ABRT_7B_ADDR_NOACK] =
-		"slave address not acknowledged (7bit mode)",
-	[ABRT_10ADDR1_NOACK] =
-		"first address byte not acknowledged (10bit mode)",
-	[ABRT_10ADDR2_NOACK] =
-		"second address byte not acknowledged (10bit mode)",
-	[ABRT_TXDATA_NOACK] =
-		"data not acknowledged",
-	[ABRT_GCALL_NOACK] =
-		"no acknowledgement for a general call",
-	[ABRT_GCALL_READ] =
-		"read after general call",
-	[ABRT_SBYTE_ACKDET] =
-		"start byte acknowledged",
-	[ABRT_SBYTE_NORSTRT] =
-		"trying to send start byte when restart is disabled",
-	[ABRT_10B_RD_NORSTRT] =
-		"trying to read when restart is disabled (10bit mode)",
-	[ABRT_MASTER_DIS] =
-		"trying to use disabled adapter",
-	[ARB_LOST] =
-		"lost arbitration",
-};
-
-static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
-{
-	u32 value;
-
-	if (dev->flags & ACCESS_16BIT)
-		value = readw_relaxed(dev->base + offset) |
-			(readw_relaxed(dev->base + offset + 2) << 16);
-	else
-		value = readl_relaxed(dev->base + offset);
-
-	if (dev->flags & ACCESS_SWAP)
-		return swab32(value);
-	else
-		return value;
-}
-
-static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
-{
-	if (dev->flags & ACCESS_SWAP)
-		b = swab32(b);
-
-	if (dev->flags & ACCESS_16BIT) {
-		writew_relaxed((u16)b, dev->base + offset);
-		writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
-	} else {
-		writel_relaxed(b, dev->base + offset);
-	}
-}
 
 static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
 {
@@ -212,121 +43,6 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
 	dw_writel(dev, dev->master_cfg, DW_IC_CON);
 }
 
-static u32
-i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
-{
-	/*
-	 * DesignWare I2C core doesn't seem to have solid strategy to meet
-	 * the tHD;STA timing spec.  Configuring _HCNT based on tHIGH spec
-	 * will result in violation of the tHD;STA spec.
-	 */
-	if (cond)
-		/*
-		 * Conditional expression:
-		 *
-		 *   IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
-		 *
-		 * This is based on the DW manuals, and represents an ideal
-		 * configuration.  The resulting I2C bus speed will be
-		 * faster than any of the others.
-		 *
-		 * If your hardware is free from tHD;STA issue, try this one.
-		 */
-		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
-	else
-		/*
-		 * Conditional expression:
-		 *
-		 *   IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
-		 *
-		 * This is just experimental rule; the tHD;STA period turned
-		 * out to be proportinal to (_HCNT + 3).  With this setting,
-		 * we could meet both tHIGH and tHD;STA timing specs.
-		 *
-		 * If unsure, you'd better to take this alternative.
-		 *
-		 * The reason why we need to take into account "tf" here,
-		 * is the same as described in i2c_dw_scl_lcnt().
-		 */
-		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
-			- 3 + offset;
-}
-
-static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
-{
-	/*
-	 * Conditional expression:
-	 *
-	 *   IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
-	 *
-	 * DW I2C core starts counting the SCL CNTs for the LOW period
-	 * of the SCL clock (tLOW) as soon as it pulls the SCL line.
-	 * In order to meet the tLOW timing spec, we need to take into
-	 * account the fall time of SCL signal (tf).  Default tf value
-	 * should be 0.3 us, for safety.
-	 */
-	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
-}
-
-static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
-{
-	dw_writel(dev, enable, DW_IC_ENABLE);
-}
-
-static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
-{
-	int timeout = 100;
-
-	do {
-		__i2c_dw_enable(dev, enable);
-		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
-			return;
-
-		/*
-		 * Wait 10 times the signaling period of the highest I2C
-		 * transfer supported by the driver (for 400KHz this is
-		 * 25us) as described in the DesignWare I2C databook.
-		 */
-		usleep_range(25, 250);
-	} while (timeout--);
-
-	dev_warn(dev->dev, "timeout in %sabling adapter\n",
-		 enable ? "en" : "dis");
-}
-
-static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
-{
-	/*
-	 * Clock is not necessary if we got LCNT/HCNT values directly from
-	 * the platform code.
-	 */
-	if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
-		return 0;
-	return dev->get_clk_rate_khz(dev);
-}
-
-static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
-{
-	int ret;
-
-	if (!dev->acquire_lock)
-		return 0;
-
-	ret = dev->acquire_lock(dev);
-	if (!ret)
-		return 0;
-
-	dev_err(dev->dev, "couldn't acquire bus ownership\n");
-
-	return ret;
-}
-
-static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
-{
-	if (dev->release_lock)
-		dev->release_lock(dev);
-}
-
 /**
  * i2c_dw_init() - Initialize the designware I2C master hardware
  * @dev: device private data
@@ -457,25 +173,6 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 }
 EXPORT_SYMBOL_GPL(i2c_dw_init);
 
-/*
- * Waiting for bus not busy
- */
-static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
-{
-	int timeout = TIMEOUT;
-
-	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
-		if (timeout <= 0) {
-			dev_warn(dev->dev, "timeout waiting for bus ready\n");
-			return -ETIMEDOUT;
-		}
-		timeout--;
-		usleep_range(1000, 1100);
-	}
-
-	return 0;
-}
-
 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
@@ -708,29 +405,6 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 	}
 }
 
-static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
-{
-	unsigned long abort_source = dev->abort_source;
-	int i;
-
-	if (abort_source & DW_IC_TX_ABRT_NOACK) {
-		for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
-			dev_dbg(dev->dev,
-				"%s: %s\n", __func__, abort_sources[i]);
-		return -EREMOTEIO;
-	}
-
-	for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
-		dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
-
-	if (abort_source & DW_IC_TX_ARB_LOST)
-		return -EAGAIN;
-	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
-		return -EINVAL; /* wrong msgs[] data */
-	else
-		return -EIO;
-}
-
 /*
  * Prepare controller for a transaction and call i2c_dw_xfer_msg.
  */
@@ -818,12 +492,6 @@ done_nolock:
 	return ret;
 }
 
-static u32 i2c_dw_func(struct i2c_adapter *adap)
-{
-	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
-	return dev->functionality;
-}
-
 static const struct i2c_algorithm i2c_dw_algo = {
 	.master_xfer = i2c_dw_xfer,
 	.functionality = i2c_dw_func,
@@ -946,29 +614,6 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-void i2c_dw_disable(struct dw_i2c_dev *dev)
-{
-	/* Disable controller */
-	__i2c_dw_enable_and_wait(dev, false);
-
-	/* Disable all interupts */
-	dw_writel(dev, 0, DW_IC_INTR_MASK);
-	dw_readl(dev, DW_IC_CLR_INTR);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_disable);
-
-void i2c_dw_disable_int(struct dw_i2c_dev *dev)
-{
-	dw_writel(dev, 0, DW_IC_INTR_MASK);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
-
-u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
-{
-	return dw_readl(dev, DW_IC_COMP_PARAM_1);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
-
 int i2c_dw_probe(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
@@ -977,7 +622,11 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 
 	init_completion(&dev->cmd_complete);
 
-	ret = i2c_dw_init(dev);
+	dev->init = i2c_dw_init;
+	dev->disable = i2c_dw_disable;
+	dev->disable_int = i2c_dw_disable_int;
+
+	ret = dev->init(dev);
 	if (ret)
 		return ret;
 
@@ -1020,5 +669,5 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 }
 EXPORT_SYMBOL_GPL(i2c_dw_probe);
 
-MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index ed485b69b449ca6b647f9c8bea30053cc564c315..86e1bd0b82e91ac6a17d081e3dd626aa252a8652 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -187,16 +187,19 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 static int i2c_dw_pci_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+
+	i_dev->disable(i_dev);
 
-	i2c_dw_disable(pci_get_drvdata(pdev));
 	return 0;
 }
 
 static int i2c_dw_pci_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
 
-	return i2c_dw_init(pci_get_drvdata(pdev));
+	return i_dev->init(i_dev);
 }
 #endif
 
@@ -296,7 +299,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 {
 	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
 
-	i2c_dw_disable(dev);
+	dev->disable(dev);
 	pm_runtime_forbid(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
 
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index fd14b410369e6bb11d7cacf9722267435a81a6f2..1f38c807be5f5fba82616cda850d8f40df4b3972 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -356,7 +356,7 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&dev->adapter);
 
-	i2c_dw_disable(dev);
+	dev->disable(dev);
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
@@ -400,7 +400,7 @@ static int dw_i2c_plat_suspend(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
-	i2c_dw_disable(i_dev);
+	i_dev->disable(i_dev);
 	i2c_dw_plat_prepare_clk(i_dev, false);
 
 	return 0;
@@ -412,7 +412,7 @@ static int dw_i2c_plat_resume(struct device *dev)
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
 	i2c_dw_plat_prepare_clk(i_dev, true);
-	i2c_dw_init(i_dev);
+	i_dev->init(i_dev);
 
 	return 0;
 }