From 880cf0717f70678b2ecd6bb762e469c64c3b0d83 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <t.figa@samsung.com>
Date: Wed, 19 Jun 2013 01:22:20 +0900
Subject: [PATCH] ARM: SAMSUNG: Introduce GPIO_SAMSUNG Kconfig entry
This patch adds Kconfig entry that selects whether legacy Samsung GPIO
driver should be built or not. For platforms that support only DT based
boot, the new pinctrl driver is used and so the old one is not needed.
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Kconfig | 6 ++++++
arch/arm/plat-samsung/include/plat/pm.h | 5 +++++
drivers/gpio/Kconfig | 7 +++++++
drivers/gpio/Makefile | 2 +-
4 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aa8dcfc279034e..15e599437e965c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -695,6 +695,7 @@ config ARCH_S3C24XX
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -718,6 +719,7 @@ config ARCH_S3C64XX
select CLKSRC_MMIO
select CPU_V6
select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -741,6 +743,7 @@ config ARCH_S5P64X0
select CLKSRC_MMIO
select CPU_V6
select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -758,6 +761,7 @@ config ARCH_S5PC100
select CLKSRC_MMIO
select CPU_V7
select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -776,6 +780,7 @@ config ARCH_S5PV210
select CLKSRC_MMIO
select CPU_V7
select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -795,6 +800,7 @@ config ARCH_EXYNOS
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index f6fcadeee969f3..5d47ca35cabde4 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void);
*/
extern void s3c_pm_configure_extint(void);
+#ifdef CONFIG_GPIO_SAMSUNG
/**
* samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
*
@@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void);
* Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
*/
extern void samsung_pm_save_gpios(void);
+#else
+static inline void samsung_pm_restore_gpios(void) {}
+static inline void samsung_pm_save_gpios(void) {}
+#endif
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 573c449c49b913..9c993ed491f177 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -209,6 +209,13 @@ config GPIO_RCAR
help
Say yes here to support GPIO on Renesas R-Car SoCs.
+config GPIO_SAMSUNG
+ bool
+ depends on PLAT_SAMSUNG
+ help
+ Legacy GPIO support. Use only for platforms without support for
+ pinctrl.
+
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 0cb2d656ad16b9..ef3e983a2f1ead 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
-obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
+obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
--
GitLab