[ARM] add Marvell 78xx0 ARM SoC support

The Marvell Discovery Duo (MV78xx0) is a family of ARM SoCs featuring
(depending on the model) one or two Feroceon CPU cores with 512K of L2
cache and VFP coprocessors running at (depending on the model) between
800 MHz and 1.2 GHz, and features a DDR2 controller, two PCIe
interfaces that can each run either in x4 or quad x1 mode, three USB
2.0 interfaces, two 3Gb/s SATA II interfaces, a SPI interface, two
TWSI interfaces, a crypto accelerator, IDMA/XOR engines, a SPI
interface, four UARTs, and depending on the model, two or four gigabit
ethernet interfaces.

This patch adds basic support for the platform, and allows booting
on the MV78x00 development board, with functional UARTs, SATA, PCIe,
GigE and USB ports.

Signed-off-by: Stanislav Samsonov <samsonov@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

include/asm-arm/arch-mv78xx0/system.h

+/*
+ * include/asm-arm/arch-mv78xx0/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif

include/asm-arm/arch-mv78xx0/timex.h

+/*
+ * include/asm-arm/arch-mv78xx0/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)

include/asm-arm/arch-mv78xx0/uncompress.h

+/*
+ * include/asm-arm/arch-mv78xx0/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/mv78xx0.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()

include/asm-arm/arch-mv78xx0/vmalloc.h

+/*
+ * include/asm-arm/arch-mv78xx0/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000