diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index aa2f77f1506ddadead56753697b7d7c8a494c592..8a5c9b3ebe1e74e982ff49060e48f1938049bf1b 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -27,6 +27,10 @@
 
 /*-------------------------------------------------------------------------*/
 
+/* PID Codes that are used here, from EHCI specification, Table 3-16. */
+#define PID_CODE_IN    1
+#define PID_CODE_SETUP 2
+
 /* fill a qtd, returning how much of the buffer we were able to queue up */
 
 static int
@@ -190,7 +194,7 @@ static int qtd_copy_status (
 	int	status = -EINPROGRESS;
 
 	/* count IN/OUT bytes, not SETUP (even short packets) */
-	if (likely (QTD_PID (token) != 2))
+	if (likely(QTD_PID(token) != PID_CODE_SETUP))
 		urb->actual_length += length - QTD_LENGTH (token);
 
 	/* don't modify error codes */
@@ -206,6 +210,13 @@ static int qtd_copy_status (
 		if (token & QTD_STS_BABBLE) {
 			/* FIXME "must" disable babbling device's port too */
 			status = -EOVERFLOW;
+		/*
+		 * When MMF is active and PID Code is IN, queue is halted.
+		 * EHCI Specification, Table 4-13.
+		 */
+		} else if ((token & QTD_STS_MMF) &&
+					(QTD_PID(token) == PID_CODE_IN)) {
+			status = -EPROTO;
 		/* CERR nonzero + halt --> stall */
 		} else if (QTD_CERR(token)) {
 			status = -EPIPE;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 2907fe4d78ddd3e78976a9f1306e296056da73ae..4917c5b033faccd0f6b9fe903dbf99cb8a47d62c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -519,7 +519,6 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
 }
-#endif /* CONFIG_PM */
 
 static void xhci_pci_shutdown(struct usb_hcd *hcd)
 {
@@ -532,6 +531,7 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 		pci_set_power_state(pdev, PCI_D3hot);
 }
+#endif /* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 72481bbb2af39a79cda097ae164bb5e96111471b..5b986d6c801d9413b6bd40381b55ae12c3b97bbb 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -32,6 +32,7 @@ endif # TYPEC_TCPCI
 config TYPEC_FUSB302
 	tristate "Fairchild FUSB302 Type-C chip driver"
 	depends on I2C
+	depends on EXTCON || !EXTCON
 	help
 	  The Fairchild FUSB302 Type-C chip driver that works with
 	  Type-C Port Controller Manager to provide USB PD and USB
diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c
index 6532d68e8808d03ad2ef4126466bdb547c4ffc66..e4b96674c40526c75726c9b5c53a81d427f83d14 100644
--- a/drivers/usb/usbip/usbip_common.c
+++ b/drivers/usb/usbip/usbip_common.c
@@ -727,6 +727,9 @@ int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb)
 
 			copy -= recv;
 			ret += recv;
+
+			if (!copy)
+				break;
 		}
 
 		if (ret != size)
diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
index 33f8972ba842feedb7837854a78d281a73c9cce5..00fc98741c5d1176bed0cc399a5e1e6e39a8cab5 100644
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -77,16 +77,21 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
 	usbip_pack_pdu(pdu, urb, USBIP_RET_SUBMIT, 0);
 
 	/* recv transfer buffer */
-	if (usbip_recv_xbuff(ud, urb) < 0)
-		return;
+	if (usbip_recv_xbuff(ud, urb) < 0) {
+		urb->status = -EPROTO;
+		goto error;
+	}
 
 	/* recv iso_packet_descriptor */
-	if (usbip_recv_iso(ud, urb) < 0)
-		return;
+	if (usbip_recv_iso(ud, urb) < 0) {
+		urb->status = -EPROTO;
+		goto error;
+	}
 
 	/* restore the padding in iso packets */
 	usbip_pad_iso(ud, urb);
 
+error:
 	if (usbip_dbg_flag_vhci_rx)
 		usbip_dump_urb(urb);