Documentation: remove duplicated words

Remove many duplicated words under Documentation/ and do other small
cleanups.

Examples:
        "and and" --> "and"
        "in in" --> "in"
        "the the" --> "the"
        "the the" --> "to the"
        ...

Signed-off-by: Paolo Ornati <ornati@fastwebnet.it>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Documentation/kdump/kdump.txt

@@ -249,7 +249,7 @@ If die() is called, and it happens to be a thread with pid 0 or 1, or die()
 is called inside interrupt context or die() is called and panic_on_oops is set,
 the system will boot into the dump-capture kernel.
 
-On powererpc systems when a soft-reset is generated, die() is called by all cpus and the system system will boot into the dump-capture kernel.
+On powererpc systems when a soft-reset is generated, die() is called by all cpus and the system will boot into the dump-capture kernel.
 
 For testing purposes, you can trigger a crash by using "ALT-SysRq-c",
 "echo c > /proc/sysrq-trigger or write a module to force the panic.

Documentation/keys.txt

@@ -671,7 +671,7 @@ The keyctl syscall functions are:
 
      Note that this setting is inherited across fork/exec.
 
-     [1] The default default is: the thread keyring if there is one, otherwise
+     [1] The default is: the thread keyring if there is one, otherwise
      the process keyring if there is one, otherwise the session keyring if
      there is one, otherwise the user default session keyring.
 

Documentation/m68k/kernel-options.txt

@@ -415,7 +415,7 @@ switch to another mode once Linux has started.
 
   The first 3 parameters of this sub-option should be obvious: <xres>,
 <yres> and <depth> give the dimensions of the screen and the number of
-planes (depth). The depth is is the logarithm to base 2 of the number
+planes (depth). The depth is the logarithm to base 2 of the number
 of colors possible. (Or, the other way round: The number of colors is
 2^depth).
 

Documentation/memory-barriers.txt

@@ -670,7 +670,7 @@ effectively random order, despite the write barrier issued by CPU 1:
 
 
 In the above example, CPU 2 perceives that B is 7, despite the load of *C
-(which would be B) coming after the the LOAD of C.
+(which would be B) coming after the LOAD of C.
 
 If, however, a data dependency barrier were to be placed between the load of C
 and the load of *C (ie: B) on CPU 2:

Documentation/networking/bonding.txt

@@ -1023,7 +1023,7 @@ Changing a Bond's Configuration
 files located in /sys/class/net/<bond name>/bonding
 
 	The names of these files correspond directly with the command-
-line parameters described elsewhere in in this file, and, with the
+line parameters described elsewhere in this file, and, with the
 exception of arp_ip_target, they accept the same values.  To see the
 current setting, simply cat the appropriate file.
 

Documentation/networking/cs89x0.txt

@@ -684,7 +684,7 @@ ethernet@crystal.cirrus.com) and request that you be registered for automatic
 software-update notification.
 
 Cirrus Logic maintains a web page at http://www.cirrus.com with the
-the latest drivers and technical publications.
+latest drivers and technical publications.
 
 
 6.4 Current maintainer

Documentation/networking/decnet.txt

@@ -82,7 +82,7 @@ ethernet address of your ethernet card has to be set according to the DECnet
 address of the node in order for it to be autoconfigured (and then appear in
 /proc/net/decnet_dev). There is a utility available at the above
 FTP sites called dn2ethaddr which can compute the correct ethernet
-address to use. The address can be set by ifconfig either before at
+address to use. The address can be set by ifconfig either before or
 at the time the device is brought up. If you are using RedHat you can
 add the line:
 

Documentation/networking/e1000.txt

@@ -350,7 +350,7 @@ Additional Configurations
 
   As an example, if you install the e1000 driver for two PRO/1000 adapters
   (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
-  the following to modules.conf or or modprobe.conf:
+  the following to modules.conf or modprobe.conf:
 
        alias eth0 e1000
        alias eth1 e1000

Documentation/networking/s2io.txt

@@ -126,7 +126,7 @@ However, you may want to set PCI latency timer to 248.
 #setpci -d 17d5:* LATENCY_TIMER=f8
 For detailed description of the PCI registers, please see Xframe User Guide.
 b. Use 2-buffer mode. This results in large performance boost on
-on certain platforms(eg. SGI Altix, IBM xSeries).
+certain platforms(eg. SGI Altix, IBM xSeries).
 c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to 
 set/verify this option.
 d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network 

Documentation/networking/sk98lin.txt

@@ -497,7 +497,7 @@ Solution: In /proc/pci search for the following entry:
           www.syskonnect.com
           
           Some COMPAQ machines have problems dealing with PCI under Linux.
-          Linux. This problem is described in the 'PCI howto' document
+          This problem is described in the 'PCI howto' document
           (included in some distributions or available from the
           web, e.g. at 'www.linux.org'). 
 

Documentation/pci-error-recovery.txt

@@ -172,7 +172,7 @@ is STEP 6 (Permanent Failure).
 >>> a value of 0xff on read, and writes will be dropped. If the device
 >>> driver attempts more than 10K I/O's to a frozen adapter, it will
 >>> assume that the device driver has gone into an infinite loop, and
->>> it will panic the the kernel. There doesn't seem to be any other
+>>> it will panic the kernel. There doesn't seem to be any other
 >>> way of stopping a device driver that insists on spinning on I/O.
 
 STEP 2: MMIO Enabled

Documentation/power/swsusp.txt

@@ -156,7 +156,7 @@ instead set the PF_NOFREEZE process flag when creating the thread (and
 be very carefull).
 
 
-Q: What is the difference between between "platform", "shutdown" and
+Q: What is the difference between "platform", "shutdown" and
 "firmware" in /sys/power/disk?
 
 A:

Documentation/prio_tree.txt

@@ -88,7 +88,7 @@ path which is not desirable. Hence, we do not optimize the height of the
 heap-and-size indexed overflow-sub-trees using prio_tree->index_bits.
 Instead the overflow sub-trees are indexed using full BITS_PER_LONG bits
 of size_index. This may lead to skewed sub-trees because most of the
-higher significant bits of the size_index are likely to be be 0 (zero). In
+higher significant bits of the size_index are likely to be 0 (zero). In
 the example above, all 3 overflow-sub-trees are skewed. This may marginally
 affect the performance. However, processes rarely map many vmas with the
 same start_vm_pgoff but different end_vm_pgoffs. Therefore, we normally

Documentation/rpc-cache.txt

@@ -53,7 +53,7 @@ Creating a Cache
 		structure
 	void cache_put(struct kref *)
 		This is called when the last reference to an item is
-		is dropped.  The pointer passed is to the 'ref' field
+		dropped.  The pointer passed is to the 'ref' field
 		in the cache_head.  cache_put should release any
 		references create by 'cache_init' and, if CACHE_VALID
 		is set, any references created by cache_update.

Documentation/s390/Debugging390.txt

@@ -1085,8 +1085,7 @@ Notes
 -----
 Addresses & values in the VM debugger are always hex never decimal
 Address ranges are of the format <HexValue1>-<HexValue2> or <HexValue1>.<HexValue2> 
-e.g. The address range  0x2000 to 0x3000 can be described described as
-2000-3000 or 2000.1000
+e.g. The address range  0x2000 to 0x3000 can be described as 2000-3000 or 2000.1000
 
 The VM Debugger is case insensitive.
 
@@ -1413,7 +1412,7 @@ SMP Specific commands
 To find out how many cpus you have
 Q CPUS displays all the CPU's available to your virtual machine
 To find the cpu that the current cpu VM debugger commands are being directed at do
-Q CPU to change the current cpu cpu VM debugger commands are being directed at do
+Q CPU to change the current cpu VM debugger commands are being directed at do
 CPU <desired cpu no>
 
 On a SMP guest issue a command to all CPUs try prefixing the command with cpu all.
@@ -2184,7 +2183,7 @@ ps -aux | grep gdb
 kill -SIGSEGV <gdb's pid>
 or alternatively use killall -SIGSEGV gdb if you have the killall command.
 Now look at the core dump.
-./gdb ./gdb core
+./gdb core
 Displays the following
 GNU gdb 4.18
 Copyright 1998 Free Software Foundation, Inc.
@@ -2477,7 +2476,7 @@ Lcrash is a perfectly normal program,however, it requires 2
 additional files, Kerntypes which is built using a patch to the 
 linux kernel sources in the linux root directory & the System.map.
 
-Kerntypes is an an objectfile whose sole purpose in life
+Kerntypes is an objectfile whose sole purpose in life
 is to provide stabs debug info to lcrash, to do this
 Kerntypes is built from kerntypes.c which just includes the most commonly
 referenced header files used when debugging, lcrash can then read the

Documentation/s390/s390dbf.txt

@@ -65,7 +65,7 @@ Predefined views for hex/ascii, sprintf and raw binary data are provided.
 It is also possible to define other views. The content of
 a view can be inspected simply by reading the corresponding debugfs file.
 
-All debug logs have an an actual debug level (range from 0 to 6).
+All debug logs have an actual debug level (range from 0 to 6).
 The default level is 3. Event and Exception functions have a 'level'
 parameter. Only debug entries with a level that is lower or equal
 than the actual level are written to the log. This means, when
@@ -556,7 +556,7 @@ The input_proc can be used to implement functionality when it is written to
 the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level).
 
 For header_proc there can be used the default function
-debug_dflt_header_fn() which is defined in in debug.h.
+debug_dflt_header_fn() which is defined in debug.h.
 and which produces the same header output as the predefined views.
 E.g:
 00 00964419409:440761 2 - 00 88023ec

Documentation/scsi/ChangeLog.1992-1997

@@ -1214,7 +1214,7 @@ Thu Jul 21 10:37:39 1994  Eric Youngdale  (eric@esp22)
 
 	* sr.c(sr_open): Do not allow opens with write access.
 
-Mon Jul 18 09:51:22 1994 1994  Eric Youngdale  (eric@esp22)
+Mon Jul 18 09:51:22 1994  Eric Youngdale  (eric@esp22)
 
 	* Linux 1.1.31 released.
 

Documentation/scsi/st.txt

@@ -249,7 +249,7 @@ BOOT TIME CONFIGURATION
 
 If the driver is compiled into the kernel, the same parameters can be
 also set using, e.g., the LILO command line. The preferred syntax is
-is to use the same keyword used when loading as module but prepended
+to use the same keyword used when loading as module but prepended
 with 'st.'. For instance, to set the maximum number of scatter/gather
 segments, the parameter 'st.max_sg_segs=xx' should be used (xx is the
 number of scatter/gather segments).

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -5486,7 +5486,7 @@ struct _snd_pcm_runtime {
   <chapter id="power-management">
     <title>Power Management</title>
     <para>
-      If the chip is supposed to work with with suspend/resume
+      If the chip is supposed to work with suspend/resume
       functions, you need to add the power-management codes to the
       driver. The additional codes for the power-management should be
       <function>ifdef</function>'ed with

Documentation/sound/oss/AWE32

@@ -55,7 +55,7 @@ SB32.
   install awe_wave /sbin/modprobe --first-time -i awe_wave && /usr/local/bin/sfxload PATH_TO_SOUND_BANK_FILE
 
   You will of course have to change "PATH_TO_SOUND_BANK_FILE" to the full
-  path of of the sound bank file. That will enable the Sound Blaster and AWE
+  path of the sound bank file. That will enable the Sound Blaster and AWE
   wave synthesis. To play midi files you should get one of these programs if
   you don't already have them: