diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 50680a59a2ff9a913e449a1d71ced9fab3004fe4..b9e9bd85429801efa537bc1ea85f773fc92099f8 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1529,6 +1529,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
* atapi_dmadir: Enable ATAPI DMADIR bridge support
+ * disable: Disable this device.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 14f1e95063380a5e2a315428fc8a4d5e8bcc39d3..c0ed4f273cf22b50a486b08f08c811e563781b07 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1238,15 +1238,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- /* AHCI controllers often implement SFF compatible interface.
- * Grab all PCI BARs just in case.
- */
- rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
- if (rc == -EBUSY)
- pcim_pin_device(pdev);
- if (rc)
- return rc;
-
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == 0x2652 || pdev->device == 0x2653)) {
u8 map;
@@ -1263,6 +1254,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
+ /* AHCI controllers often implement SFF compatible interface.
+ * Grab all PCI BARs just in case.
+ */
+ rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index ae2d73fe321e2f2c62d8e5709a788905edfd5a89..3e23e9941dad0080d629581723243c6550d4d476 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -113,7 +113,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
- * is 0x07fffffd, and the other one write for setting
+ * is 0x07ffffff, and the other one write for setting
* the mpll_clk_en.
*/
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -124,6 +124,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
| IMX6Q_GPR13_SATA_TX_BOOST_MASK
| IMX6Q_GPR13_SATA_TX_LVL_MASK
+ | IMX6Q_GPR13_SATA_MPLL_CLK_EN
| IMX6Q_GPR13_SATA_TX_EDGE_RATE
, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 75b93678bbcd7f4231e0c2028995795487db671c..1393a5890ed5356e5ef36965ea74e49e226c0a29 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2149,9 +2149,16 @@ static int ata_dev_config_ncq(struct ata_device *dev,
"failed to get NCQ Send/Recv Log Emask 0x%x\n",
err_mask);
} else {
+ u8 *cmds = dev->ncq_send_recv_cmds;
+
dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
- memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
- ATA_LOG_NCQ_SEND_RECV_SIZE);
+ memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
+
+ if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
+ ata_dev_dbg(dev, "disabling queued TRIM support\n");
+ cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
+ ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
+ }
}
}
@@ -4156,6 +4163,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
+ /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+ { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
@@ -4202,6 +4212,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
+ /* devices that don't properly handle queued TRIM commands */
+ { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Crucial_CT???M500SSD1", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+
/* End Marker */
{ }
};
@@ -6519,6 +6533,7 @@ static int __init ata_parse_force_one(char **cur,
{ "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
{ "rstonce", .lflags = ATA_LFLAG_RST_ONCE },
{ "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR },
+ { "disable", .horkage_on = ATA_HORKAGE_DISABLE },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index ab58556d347c19120c9724389583c2ae67a2d81e..377eb889f555dd2029c46a01254a3a204744ac81 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3872,6 +3872,27 @@ void ata_scsi_hotplug(struct work_struct *work)
return;
}
+ /*
+ * XXX - UGLY HACK
+ *
+ * The block layer suspend/resume path is fundamentally broken due
+ * to freezable kthreads and workqueue and may deadlock if a block
+ * device gets removed while resume is in progress. I don't know
+ * what the solution is short of removing freezable kthreads and
+ * workqueues altogether.
+ *
+ * The following is an ugly hack to avoid kicking off device
+ * removal while freezer is active. This is a joke but does avoid
+ * this particular deadlock scenario.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=62801
+ * http://marc.info/?l=linux-kernel&m=138695698516487
+ */
+#ifdef CONFIG_FREEZER
+ while (pm_freezing)
+ msleep(10);
+#endif
+
DPRINTK("ENTER\n");
mutex_lock(&ap->scsi_scan_mutex);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0e23c26485f457cf2380818a18b00c1175bc02ae..9b503376738fac8e25e9fa71b286b4c341295d76 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -418,6 +418,7 @@ enum {
ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */
ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */
ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */
+ ATA_HORKAGE_NO_NCQ_TRIM = (1 << 19), /* don't use queued TRIM */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
diff --git a/kernel/freezer.c b/kernel/freezer.c
index b462fa197517b6176701fa860cdb966bc44a69ba..aa6a8aadb911fb323b4662a4652c95ff4319f0c5 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -19,6 +19,12 @@ EXPORT_SYMBOL(system_freezing_cnt);
bool pm_freezing;
bool pm_nosig_freezing;
+/*
+ * Temporary export for the deadlock workaround in ata_scsi_hotplug().
+ * Remove once the hack becomes unnecessary.
+ */
+EXPORT_SYMBOL_GPL(pm_freezing);
+
/* protects freezing and frozen transitions */
static DEFINE_SPINLOCK(freezer_lock);