From 3afb6f637e8edd68cee35b5c432c176f57fd712f Mon Sep 17 00:00:00 2001
From: Dean Luick <dean.luick@intel.com>
Date: Sat, 5 Mar 2016 08:49:39 -0800
Subject: [PATCH] IB/hfi1: Remove ASIC block clear
The ASIC block is shared between two HFIs. Individual devices
should not initialize registers there. Retain the power-on values.
Individual users set registers as needed with one exception.
Clear sbus fast mode on "slow" calls.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
---
drivers/staging/rdma/hfi1/chip.c | 88 ----------------------------
drivers/staging/rdma/hfi1/firmware.c | 3 +
2 files changed, 3 insertions(+), 88 deletions(-)
diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c
index 263c8827451433..0874287dcc045a 100644
--- a/drivers/staging/rdma/hfi1/chip.c
+++ b/drivers/staging/rdma/hfi1/chip.c
@@ -12934,91 +12934,6 @@ static void reset_cce_csrs(struct hfi1_devdata *dd)
write_csr(dd, CCE_INT_COUNTER_ARRAY32 + (8 * i), 0);
}
-/* set ASIC CSRs to chip reset defaults */
-static void reset_asic_csrs(struct hfi1_devdata *dd)
-{
- int i;
-
- /*
- * If the HFIs are shared between separate nodes or VMs,
- * then more will need to be done here. One idea is a module
- * parameter that returns early, letting the first power-on or
- * a known first load do the reset and blocking all others.
- */
-
- if (!(dd->flags & HFI1_DO_INIT_ASIC))
- return;
-
- if (dd->icode != ICODE_FPGA_EMULATION) {
- /* emulation does not have an SBus - leave these alone */
- /*
- * All writes to ASIC_CFG_SBUS_REQUEST do something.
- * Notes:
- * o The reset is not zero if aimed at the core. See the
- * SBus documentation for details.
- * o If the SBus firmware has been updated (e.g. by the BIOS),
- * will the reset revert that?
- */
- /* ASIC_CFG_SBUS_REQUEST leave alone */
- write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0);
- }
- /* ASIC_SBUS_RESULT read-only */
- write_csr(dd, ASIC_STS_SBUS_COUNTERS, 0);
- for (i = 0; i < ASIC_NUM_SCRATCH; i++)
- write_csr(dd, ASIC_CFG_SCRATCH + (8 * i), 0);
- write_csr(dd, ASIC_CFG_MUTEX, 0); /* this will clear it */
-
- /* We might want to retain this state across FLR if we ever use it */
- write_csr(dd, ASIC_CFG_DRV_STR, 0);
-
- /* ASIC_CFG_THERM_POLL_EN leave alone */
- /* ASIC_STS_THERM read-only */
- /* ASIC_CFG_RESET leave alone */
-
- write_csr(dd, ASIC_PCIE_SD_HOST_CMD, 0);
- /* ASIC_PCIE_SD_HOST_STATUS read-only */
- write_csr(dd, ASIC_PCIE_SD_INTRPT_DATA_CODE, 0);
- write_csr(dd, ASIC_PCIE_SD_INTRPT_ENABLE, 0);
- /* ASIC_PCIE_SD_INTRPT_PROGRESS read-only */
- write_csr(dd, ASIC_PCIE_SD_INTRPT_STATUS, ~0ull); /* clear */
- /* ASIC_HFI0_PCIE_SD_INTRPT_RSPD_DATA read-only */
- /* ASIC_HFI1_PCIE_SD_INTRPT_RSPD_DATA read-only */
- for (i = 0; i < 16; i++)
- write_csr(dd, ASIC_PCIE_SD_INTRPT_LIST + (8 * i), 0);
-
- /* ASIC_GPIO_IN read-only */
- write_csr(dd, ASIC_GPIO_OE, 0);
- write_csr(dd, ASIC_GPIO_INVERT, 0);
- write_csr(dd, ASIC_GPIO_OUT, 0);
- write_csr(dd, ASIC_GPIO_MASK, 0);
- /* ASIC_GPIO_STATUS read-only */
- write_csr(dd, ASIC_GPIO_CLEAR, ~0ull);
- /* ASIC_GPIO_FORCE leave alone */
-
- /* ASIC_QSFP1_IN read-only */
- write_csr(dd, ASIC_QSFP1_OE, 0);
- write_csr(dd, ASIC_QSFP1_INVERT, 0);
- write_csr(dd, ASIC_QSFP1_OUT, 0);
- write_csr(dd, ASIC_QSFP1_MASK, 0);
- /* ASIC_QSFP1_STATUS read-only */
- write_csr(dd, ASIC_QSFP1_CLEAR, ~0ull);
- /* ASIC_QSFP1_FORCE leave alone */
-
- /* ASIC_QSFP2_IN read-only */
- write_csr(dd, ASIC_QSFP2_OE, 0);
- write_csr(dd, ASIC_QSFP2_INVERT, 0);
- write_csr(dd, ASIC_QSFP2_OUT, 0);
- write_csr(dd, ASIC_QSFP2_MASK, 0);
- /* ASIC_QSFP2_STATUS read-only */
- write_csr(dd, ASIC_QSFP2_CLEAR, ~0ull);
- /* ASIC_QSFP2_FORCE leave alone */
-
- write_csr(dd, ASIC_EEP_CTL_STAT, ASIC_EEP_CTL_STAT_RESETCSR);
- /* this also writes a NOP command, clearing paging mode */
- write_csr(dd, ASIC_EEP_ADDR_CMD, 0);
- write_csr(dd, ASIC_EEP_DATA, 0);
-}
-
/* set MISC CSRs to chip reset defaults */
static void reset_misc_csrs(struct hfi1_devdata *dd)
{
@@ -13428,14 +13343,11 @@ static void init_chip(struct hfi1_devdata *dd)
hfi1_pcie_flr(dd);
restore_pci_variables(dd);
}
-
- reset_asic_csrs(dd);
} else {
dd_dev_info(dd, "Resetting CSRs with writes\n");
reset_cce_csrs(dd);
reset_txe_csrs(dd);
reset_rxe_csrs(dd);
- reset_asic_csrs(dd);
reset_misc_csrs(dd);
}
/* clear the DC reset */
diff --git a/drivers/staging/rdma/hfi1/firmware.c b/drivers/staging/rdma/hfi1/firmware.c
index d5befd1afdbb65..ca4e48988b7073 100644
--- a/drivers/staging/rdma/hfi1/firmware.c
+++ b/drivers/staging/rdma/hfi1/firmware.c
@@ -1170,6 +1170,9 @@ int sbus_request_slow(struct hfi1_devdata *dd,
{
u64 reg, count = 0;
+ /* make sure fast mode is clear */
+ clear_sbus_fast_mode(dd);
+
sbus_request(dd, receiver_addr, data_addr, command, data_in);
write_csr(dd, ASIC_CFG_SBUS_EXECUTE,
ASIC_CFG_SBUS_EXECUTE_EXECUTE_SMASK);
--
GitLab