From 334825c1bbc91a09ddb775a6edbc94a4e0a1077f Mon Sep 17 00:00:00 2001
From: Nicola Sparnacci <nicola.sparnacci@seco.com>
Date: Tue, 20 Feb 2024 15:15:52 +0000
Subject: [PATCH] [C57][DTS][C57-32] Add support to eMMC and USB 3.0
Add to the device tree the required nodes to load the file system
from USB 3.0 or eMMC.
---
arch/arm64/boot/dts/seco/seco-imx8qxp-c57.dts | 72 +++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/arch/arm64/boot/dts/seco/seco-imx8qxp-c57.dts b/arch/arm64/boot/dts/seco/seco-imx8qxp-c57.dts
index 61d1423af9fcff..bfd5e636500d35 100644
--- a/arch/arm64/boot/dts/seco/seco-imx8qxp-c57.dts
+++ b/arch/arm64/boot/dts/seco/seco-imx8qxp-c57.dts
@@ -33,6 +33,7 @@
serial1 = &lpuart1;
serial2 = &lpuart2;
serial3 = &lpuart3;
+ mmc0 = &usdhc1;
};
cpus {
@@ -86,6 +87,54 @@
IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020
>;
};
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
};
};
@@ -106,4 +155,27 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>;
status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&usbotg3 {
+ status = "okay";
+};
+
+&usbotg3_cdns3 {
+ dr_mode = "host";
+ status = "okay";
};
\ No newline at end of file
--
GitLab