diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index dd4190b50df6a71a43d0fb22175ddb3f1e7d64c7..6066bbfc42fe4126a849495563e1eae58d4244d4 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -468,13 +468,13 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev)
static void meson_sar_adc_clear_fifo(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
- int count;
+ unsigned int count, tmp;
for (count = 0; count < MESON_SAR_ADC_MAX_FIFO_SIZE; count++) {
if (!meson_sar_adc_get_fifo_count(indio_dev))
break;
- regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, 0);
+ regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &tmp);
}
}
diff --git a/drivers/iio/adc/mxs-lradc-adc.c b/drivers/iio/adc/mxs-lradc-adc.c
index b0c7d8ee5cb8d859d683b2b0aca40ef5999d2546..6888167ca1e6cb65ab926b36fe8199684a00527d 100644
--- a/drivers/iio/adc/mxs-lradc-adc.c
+++ b/drivers/iio/adc/mxs-lradc-adc.c
@@ -718,9 +718,12 @@ static int mxs_lradc_adc_probe(struct platform_device *pdev)
adc->dev = dev;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores)
+ return -EINVAL;
+
adc->base = devm_ioremap(dev, iores->start, resource_size(iores));
- if (IS_ERR(adc->base))
- return PTR_ERR(adc->base);
+ if (!adc->base)
+ return -ENOMEM;
init_completion(&adc->completion);
spin_lock_init(&adc->lock);
diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c
index dd99d273bae9bf620f2543b39400d10e5ae66fd6..ff03324dee132f49455fd156bacbc9b450146a19 100644
--- a/drivers/iio/buffer/industrialio-buffer-dma.c
+++ b/drivers/iio/buffer/industrialio-buffer-dma.c
@@ -14,6 +14,7 @@
#include <linux/sched.h>
#include <linux/poll.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/buffer_impl.h>
#include <linux/iio/buffer-dma.h>
#include <linux/dma-mapping.h>
#include <linux/sizes.h>
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index 9fabed47053ddaf2517500845d337429f6c9af22..2b5a320f42c51e1872835b19454f8924f2e004ea 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -14,6 +14,7 @@
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/buffer_impl.h>
#include <linux/iio/buffer-dma.h>
#include <linux/iio/buffer-dmaengine.h>
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 96dabbd2f004b3d91c1cde6cca2f6dfdaf091d58..88a7c5d4e4d2850ae9755b5fb79ff595855cac7c 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -41,6 +41,7 @@ static const int accel_scale[] = {598, 1196, 2392, 4785};
static const struct inv_mpu6050_reg_map reg_set_6500 = {
.sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
.lpf = INV_MPU6050_REG_CONFIG,
+ .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2,
.user_ctrl = INV_MPU6050_REG_USER_CTRL,
.fifo_en = INV_MPU6050_REG_FIFO_EN,
.gyro_config = INV_MPU6050_REG_GYRO_CONFIG,
@@ -210,6 +211,37 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on)
}
EXPORT_SYMBOL_GPL(inv_mpu6050_set_power_itg);
+/**
+ * inv_mpu6050_set_lpf_regs() - set low pass filter registers, chip dependent
+ *
+ * MPU60xx/MPU9150 use only 1 register for accelerometer + gyroscope
+ * MPU6500 and above have a dedicated register for accelerometer
+ */
+static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st,
+ enum inv_mpu6050_filter_e val)
+{
+ int result;
+
+ result = regmap_write(st->map, st->reg->lpf, val);
+ if (result)
+ return result;
+
+ switch (st->chip_type) {
+ case INV_MPU6050:
+ case INV_MPU6000:
+ case INV_MPU9150:
+ /* old chips, nothing to do */
+ result = 0;
+ break;
+ default:
+ /* set accel lpf */
+ result = regmap_write(st->map, st->reg->accel_lpf, val);
+ break;
+ }
+
+ return result;
+}
+
/**
* inv_mpu6050_init_config() - Initialize hardware, disable FIFO.
*
@@ -233,8 +265,7 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
if (result)
return result;
- d = INV_MPU6050_FILTER_20HZ;
- result = regmap_write(st->map, st->reg->lpf, d);
+ result = inv_mpu6050_set_lpf_regs(st, INV_MPU6050_FILTER_20HZ);
if (result)
return result;
@@ -537,6 +568,8 @@ error_write_raw:
* would be alising. This function basically search for the
* correct low pass parameters based on the fifo rate, e.g,
* sampling frequency.
+ *
+ * lpf is set automatically when setting sampling rate to avoid any aliases.
*/
static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
{
@@ -552,7 +585,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1))
i++;
data = d[i];
- result = regmap_write(st->map, st->reg->lpf, data);
+ result = inv_mpu6050_set_lpf_regs(st, data);
if (result)
return result;
st->chip_config.lpf = data;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index ef13de7a2c20fd6ef3e450f8d3094483af71b9a9..953a0c09d5685a18d447e4ad07f3f334b32cd8cf 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -28,6 +28,7 @@
* struct inv_mpu6050_reg_map - Notable registers.
* @sample_rate_div: Divider applied to gyro output rate.
* @lpf: Configures internal low pass filter.
+ * @accel_lpf: Configures accelerometer low pass filter.
* @user_ctrl: Enables/resets the FIFO.
* @fifo_en: Determines which data will appear in FIFO.
* @gyro_config: gyro config register.
@@ -47,6 +48,7 @@
struct inv_mpu6050_reg_map {
u8 sample_rate_div;
u8 lpf;
+ u8 accel_lpf;
u8 user_ctrl;
u8 fifo_en;
u8 gyro_config;
@@ -188,6 +190,7 @@ struct inv_mpu6050_state {
#define INV_MPU6050_FIFO_THRESHOLD 500
/* mpu6500 registers */
+#define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D
#define INV_MPU6500_REG_ACCEL_OFFSET 0x77
/* delay time in milliseconds */
diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c
index dc6ecd8243659012629e5a2c1206861eec647eb3..ff10d1f0a7e452fb1f526395794caf0bd1ef26c4 100644
--- a/drivers/staging/iio/cdc/ad7152.c
+++ b/drivers/staging/iio/cdc/ad7152.c
@@ -231,16 +231,12 @@ static int ad7152_write_raw_samp_freq(struct device *dev, int val)
if (i >= ARRAY_SIZE(ad7152_filter_rate_table))
i = ARRAY_SIZE(ad7152_filter_rate_table) - 1;
- mutex_lock(&chip->state_lock);
ret = i2c_smbus_write_byte_data(chip->client,
AD7152_REG_CFG2, AD7152_CFG2_OSR(i));
- if (ret < 0) {
- mutex_unlock(&chip->state_lock);
+ if (ret < 0)
return ret;
- }
chip->filter_rate_setup = i;
- mutex_unlock(&chip->state_lock);
return ret;
}
diff --git a/drivers/staging/rtl8723bs/os_dep/osdep_service.c b/drivers/staging/rtl8723bs/os_dep/osdep_service.c
index 02db59e8b593309e6e4b161d977178947cd24c57..aa16d1ab955b43ae57c1a317beb365b2cfd2d476 100644
--- a/drivers/staging/rtl8723bs/os_dep/osdep_service.c
+++ b/drivers/staging/rtl8723bs/os_dep/osdep_service.c
@@ -160,7 +160,7 @@ static int isFileReadable(char *path)
oldfs = get_fs(); set_fs(get_ds());
if (1!=readFile(fp, &buf, 1))
- ret = PTR_ERR(fp);
+ ret = -EINVAL;
set_fs(oldfs);
filp_close(fp, NULL);