diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst
index f9c53ca5cf93431ab042d00f121ac1749c37393f..f4adeed5f5f02b91edb008902ef573966f95d4f9 100644
--- a/samples/pktgen/README.rst
+++ b/samples/pktgen/README.rst
@@ -28,10 +28,28 @@ across the sample scripts.  Usage example is printed on errors::
   -b : ($BURST)     HW level bursting of SKBs
   -v : ($VERBOSE)   verbose
   -x : ($DEBUG)     debug
+  -6 : ($IP6)       IPv6
+  -w : ($DELAY)     Tx Delay value (ns)
+  -a : ($APPEND)    Script will not reset generator's state, but will append its config
 
 The global variable being set is also listed.  E.g. the required
 interface/device parameter "-i" sets variable $DEV.
 
+"-a" parameter may be used to create different flows simultaneously.
+In this mode script will keep the existing config, will append its settings.
+In this mode you'll have to manually run traffic with "pg_ctrl start".
+
+For example you may use:
+
+    source ./samples/pktgen/functions.sh
+    pg_ctrl reset
+    # add first device
+    ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f0 -m 34:80:0d:a3:fc:c9 -t 8
+    # add second device
+    ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f1 -m 34:80:0d:a3:fc:c9 -t 8
+    # run joint traffic on two devs
+    pg_ctrl start
+
 Common functions
 ----------------
 The functions.sh file provides; Three different shell functions for
diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh
index dae06d5b38fa3e2a49a2ea0da839ad4eb166c321..a335393157eb05407bc640963fe75e213e7425f3 100644
--- a/samples/pktgen/functions.sh
+++ b/samples/pktgen/functions.sh
@@ -108,7 +108,12 @@ function pgset() {
     fi
 }
 
-[[ $EUID -eq 0 ]] && trap 'pg_ctrl "reset"' EXIT
+if [[ -z "$APPEND" ]]; then
+	if [[ $EUID -eq 0 ]]; then
+		# Cleanup pktgen setup on exit if thats not "append mode"
+		trap 'pg_ctrl "reset"' EXIT
+	fi
+fi
 
 ## -- General shell tricks --
 
diff --git a/samples/pktgen/parameters.sh b/samples/pktgen/parameters.sh
index ff0ed474fee9a3ffc596c08e0a2a6e8de6c8774a..b4c1b371e4b8730bc8208ec1948b471b299a0cfa 100644
--- a/samples/pktgen/parameters.sh
+++ b/samples/pktgen/parameters.sh
@@ -19,12 +19,14 @@ function usage() {
     echo "  -v : (\$VERBOSE)   verbose"
     echo "  -x : (\$DEBUG)     debug"
     echo "  -6 : (\$IP6)       IPv6"
+    echo "  -w : (\$DELAY)     Tx Delay value (ns)"
+    echo "  -a : (\$APPEND)    Script will not reset generator's state, but will append its config"
     echo ""
 }
 
 ##  --- Parse command line arguments / parameters ---
 ## echo "Commandline options:"
-while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
+while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6a" option; do
     case $option in
         i) # interface
           export DEV=$OPTARG
@@ -66,6 +68,10 @@ while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
 	  export BURST=$OPTARG
 	  info "SKB bursting: BURST=$BURST"
           ;;
+        w)
+	  export DELAY=$OPTARG
+	  info "DELAY=$DELAY"
+          ;;
         v)
           export VERBOSE=yes
           info "Verbose mode: VERBOSE=$VERBOSE"
@@ -78,6 +84,10 @@ while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
 	  export IP6=6
 	  info "IP6: IP6=$IP6"
 	  ;;
+        a)
+          export APPEND=yes
+          info "Append mode: APPEND=$APPEND"
+          ;;
         h|?|*)
           usage;
           err 2 "[ERROR] Unknown parameters!!!"
@@ -100,6 +110,9 @@ if [ -z "$THREADS" ]; then
     export THREADS=1
 fi
 
+# default DELAY
+[ -z "$DELAY" ] && export DELAY=0 # Zero means max speed
+
 export L_THREAD=$(( THREADS + F_THREAD - 1 ))
 
 if [ -z "$DEV" ]; then
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
index 1b6204125d2d79bb49ffa343457157cbf347316e..30a610b541ad07fefc8eecdfe4de6a57598a7444 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
@@ -50,9 +50,6 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"        # Zero means max speed
-
 # General cleanup everything since last run
 pg_ctrl "reset"
 
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
index e607cb369b20bd5a33636810b964a2d55d1fc6cc..a6195bd775327990a9ae3dfb4d111a7602a9332c 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
@@ -33,9 +33,6 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"        # Zero means max speed
-
 # General cleanup everything since last run
 pg_ctrl "reset"
 
diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
index a4e250b45dcead5f9ae8904cd6963d1eb34a9ad5..a09f3422fbccac897977932413b10e83ac161760 100755
--- a/samples/pktgen/pktgen_sample01_simple.sh
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -31,20 +31,17 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"        # Zero means max speed
-
 # Flow variation random source port between min and max
 UDP_SRC_MIN=9
 UDP_SRC_MAX=109
 
 # General cleanup everything since last run
 # (especially important if other threads were configured by other scripts)
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Add remove all other devices and add_device $DEV to thread 0
 thread=0
-pg_thread $thread "rem_device_all"
+[ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
 pg_thread $thread "add_device" $DEV
 
 # How many packets to send (zero means indefinitely)
@@ -80,11 +77,15 @@ pg_set $DEV "flag UDPSRC_RND"
 pg_set $DEV "udp_src_min $UDP_SRC_MIN"
 pg_set $DEV "udp_src_max $UDP_SRC_MAX"
 
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+    # start_run
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
 
-# Print results
-echo "Result device: $DEV"
-cat /proc/net/pktgen/$DEV
+    # Print results
+    echo "Result device: $DEV"
+    cat /proc/net/pktgen/$DEV
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
\ No newline at end of file
diff --git a/samples/pktgen/pktgen_sample02_multiqueue.sh b/samples/pktgen/pktgen_sample02_multiqueue.sh
index cb2495fcdc60de70353bf3477bb12cd4d944a279..acae8ede0d6cbb7eb8fcdf25457285c9103cf28b 100755
--- a/samples/pktgen/pktgen_sample02_multiqueue.sh
+++ b/samples/pktgen/pktgen_sample02_multiqueue.sh
@@ -17,7 +17,6 @@ source ${basedir}/parameters.sh
 [ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely
 
 # Base Config
-DELAY="0"        # Zero means max speed
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
 # Flow variation random source port between min and max
@@ -39,7 +38,7 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
@@ -48,7 +47,7 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Notice config queue to map to cpu (mirrors smp_processor_id())
@@ -82,14 +81,18 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "udp_src_max $UDP_SRC_MAX"
 done
 
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+    # start_run
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
 
-# Print results
-for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
-    dev=${DEV}@${thread}
-    echo "Device: $dev"
-    cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+    # Print results
+    for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
+        dev=${DEV}@${thread}
+        echo "Device: $dev"
+        cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+    done
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
index fff50765a5aab4bc70cd6564b5ffc21d38efe06b..5adcf954de731089c6973bb27d554ca6856fb760 100755
--- a/samples/pktgen/pktgen_sample03_burst_single_flow.sh
+++ b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
@@ -42,18 +42,15 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"  # Zero means max speed
-
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -97,5 +94,9 @@ function control_c() {
 # trap keyboard interrupt (Ctrl-C)
 trap control_c SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample04_many_flows.sh b/samples/pktgen/pktgen_sample04_many_flows.sh
index 2cd6b701400de5cee39d9fe518c74f68846fcf71..ddce876635aa01177fd04054c582a91e1177e345 100755
--- a/samples/pktgen/pktgen_sample04_many_flows.sh
+++ b/samples/pktgen/pktgen_sample04_many_flows.sh
@@ -34,9 +34,6 @@ fi
 [ -z "$FLOWS" ]     && FLOWS="8000"
 [ -z "$FLOWLEN" ]   && FLOWLEN="10"
 
-# Base Config
-DELAY="0"  # Zero means max speed
-
 if [[ -n "$BURST" ]]; then
     err 1 "Bursting not supported for this mode"
 fi
@@ -45,14 +42,14 @@ fi
 read -r SRC_MIN SRC_MAX <<< $(parse_addr 198.18.0.0/15)
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -107,7 +104,11 @@ function print_result() {
 # trap keyboard interrupt (Ctrl-C)
 trap true SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
 
-print_result
+    print_result
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample05_flow_per_thread.sh b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
index 4cb6252ade399fecd88872f3b3c8de657eb4bf37..4a65fe2fcee926a355e5c4f16105456860d7e83a 100755
--- a/samples/pktgen/pktgen_sample05_flow_per_thread.sh
+++ b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
@@ -31,18 +31,15 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"  # Zero means max speed
-
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -91,7 +88,11 @@ function print_result() {
 # trap keyboard interrupt (Ctrl-C)
 trap true SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
 
-print_result
+    print_result
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
index 728106060a02615d4f7281e719fd67518642eadf..10f1da571f40d8996fd4bf8dd04e01795b844a91 100755
--- a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
+++ b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
@@ -15,7 +15,6 @@ root_check_run_with_sudo "$@"
 source ${basedir}/parameters.sh
 
 # Base Config
-DELAY="0"        # Zero means max speed
 [ -z "$COUNT" ]     && COUNT="20000000"   # Zero means indefinitely
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
@@ -45,7 +44,7 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((i = 0; i < $THREADS; i++)); do
@@ -59,7 +58,7 @@ for ((i = 0; i < $THREADS; i++)); do
     info "irq ${irq_array[$i]} is set affinity to `cat /proc/irq/${irq_array[$i]}/smp_affinity_list`"
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # select queue and bind the queue and $dev in 1:1 relationship
@@ -100,14 +99,18 @@ for ((i = 0; i < $THREADS; i++)); do
 done
 
 # start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
-
-# Print results
-for ((i = 0; i < $THREADS; i++)); do
-    thread=${cpu_array[$((i+F_THREAD))]}
-    dev=${DEV}@${thread}
-    echo "Device: $dev"
-    cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
+
+    # Print results
+    for ((i = 0; i < $THREADS; i++)); do
+        thread=${cpu_array[$((i+F_THREAD))]}
+        dev=${DEV}@${thread}
+        echo "Device: $dev"
+        cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+    done
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi