From 0d12922823408b26f83b15cae4a4feff4bd22f28 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 3 Oct 2006 01:15:54 -0700
Subject: [PATCH] [PATCH] md: define ->congested_fn for raid1, raid10, and
multipath
raid1, raid10 and multipath don't report their 'congested' status through
bdi_*_congested, but should.
This patch adds the appropriate functions which just check the 'congested'
status of all active members (with appropriate locking).
raid1 read_balance should be modified to prefer devices where
bdi_read_congested returns false. Then we could use the '&' branch rather
than the '|' branch. However that should would need some benchmarking first
to make sure it is actually a good idea.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---
drivers/md/multipath.c | 24 ++++++++++++++++++++++++
drivers/md/raid1.c | 28 ++++++++++++++++++++++++++++
drivers/md/raid10.c | 22 ++++++++++++++++++++++
3 files changed, 74 insertions(+)
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index e4f168d063db36..171ff41b52b053 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -228,6 +228,28 @@ static int multipath_issue_flush(request_queue_t *q, struct gendisk *disk,
rcu_read_unlock();
return ret;
}
+static int multipath_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+ multipath_conf_t *conf = mddev_to_conf(mddev);
+ int i, ret = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < mddev->raid_disks ; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev);
+ if (rdev && !test_bit(Faulty, &rdev->flags)) {
+ request_queue_t *q = bdev_get_queue(rdev->bdev);
+
+ ret |= bdi_congested(&q->backing_dev_info, bits);
+ /* Just like multipath_map, we just check the
+ * first available device
+ */
+ break;
+ }
+ }
+ rcu_read_unlock();
+ return ret;
+}
/*
* Careful, this can execute in IRQ contexts as well!
@@ -509,6 +531,8 @@ static int multipath_run (mddev_t *mddev)
mddev->queue->unplug_fn = multipath_unplug;
mddev->queue->issue_flush_fn = multipath_issue_flush;
+ mddev->queue->backing_dev_info.congested_fn = multipath_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 99c4e031c7f166..dc9d2def0270df 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -601,6 +601,32 @@ static int raid1_issue_flush(request_queue_t *q, struct gendisk *disk,
return ret;
}
+static int raid1_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+ conf_t *conf = mddev_to_conf(mddev);
+ int i, ret = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < mddev->raid_disks; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
+ if (rdev && !test_bit(Faulty, &rdev->flags)) {
+ request_queue_t *q = bdev_get_queue(rdev->bdev);
+
+ /* Note the '|| 1' - when read_balance prefers
+ * non-congested targets, it can be removed
+ */
+ if ((bits & (1<<BDI_write_congested)) || 1)
+ ret |= bdi_congested(&q->backing_dev_info, bits);
+ else
+ ret &= bdi_congested(&q->backing_dev_info, bits);
+ }
+ }
+ rcu_read_unlock();
+ return ret;
+}
+
+
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
@@ -1965,6 +1991,8 @@ static int run(mddev_t *mddev)
mddev->queue->unplug_fn = raid1_unplug;
mddev->queue->issue_flush_fn = raid1_issue_flush;
+ mddev->queue->backing_dev_info.congested_fn = raid1_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
return 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 64f8016ab740a3..1250f0eab4afaf 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -648,6 +648,26 @@ static int raid10_issue_flush(request_queue_t *q, struct gendisk *disk,
return ret;
}
+static int raid10_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+ conf_t *conf = mddev_to_conf(mddev);
+ int i, ret = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < mddev->raid_disks && ret == 0; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
+ if (rdev && !test_bit(Faulty, &rdev->flags)) {
+ request_queue_t *q = bdev_get_queue(rdev->bdev);
+
+ ret |= bdi_congested(&q->backing_dev_info, bits);
+ }
+ }
+ rcu_read_unlock();
+ return ret;
+}
+
+
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
@@ -2094,6 +2114,8 @@ static int run(mddev_t *mddev)
mddev->queue->unplug_fn = raid10_unplug;
mddev->queue->issue_flush_fn = raid10_issue_flush;
+ mddev->queue->backing_dev_info.congested_fn = raid10_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
/* Calculate max read-ahead size.
* We need to readahead at least twice a whole stripe....
--
GitLab