diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index bdadc3da9556d47e52372f0a68846779dccc1d95..6970f30a3770f8027a2509aab25f4fe75785667e 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -66,7 +66,7 @@ Required root node properties:
- "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale
Octa board.
- "insignal,origen" - for Exynos4210-based Insignal Origen board.
- - "insignal,origen4412 - for Exynos4412-based Insignal Origen board.
+ - "insignal,origen4412" - for Exynos4412-based Insignal Origen board.
Optional nodes:
diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 6fddb4f4f71a45f0fc001b7f904a89f6e50948b3..3055d5c2c04e0ab796215803196c7590a69e02be 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -36,7 +36,7 @@ Optional nodes:
- port/ports: to describe a connection to an external encoder. The
binding follows Documentation/devicetree/bindings/graph.txt and
- suppors a single port with a single endpoint.
+ supports a single port with a single endpoint.
- See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
index 20fc72d9e61e5721e56e0aeb0479682f921fd154..45a61b46228712592029e75fe117262ba47d9112 100644
--- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
@@ -1,7 +1,7 @@
Nintendo Wii (Hollywood) GPIO controller
Required properties:
-- compatible: "nintendo,hollywood-gpio
+- compatible: "nintendo,hollywood-gpio"
- reg: Physical base address and length of the controller's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be <2>. The first cell is the pin number and the
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
index 121d9b7c79a24cd05e6452bb8b52a14d3d20f46a..1063c30d53f7d0fd7b642d323d32799ba4fb51fe 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
@@ -32,7 +32,7 @@ i2c@00000000 {
reg = <0x6c>;
interrupt-parent = <&gpx1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&ldo15_reg>";
+ vdd-supply = <&ldo15_reg>;
vid-supply = <&ldo18_reg>;
reset-gpios = <&gpx1 5 0>;
touchscreen-size-x = <1080>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
index 1099fe0788fae19c27dd1153e6d9d9e4aba10c6f..f246ccbf8838c2c90496572af8aa4e4d17079be1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
@@ -15,7 +15,7 @@ Required properties:
include "nvidia,tegra30-ictlr".
- reg : Specifies base physical address and size of the registers.
Each controller must be described separately (Tegra20 has 4 of them,
- whereas Tegra30 and later have 5"
+ whereas Tegra30 and later have 5).
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
index 136bd612bd8359488447b9ae12b335ffb083ba80..6a36bf66d932d42320cfc6b3c998b16488609d61 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -12,7 +12,7 @@ Required properties:
specifier, shall be 2
- interrupts: interrupts references to primary interrupt controller
(only needed for exti controller with multiple exti under
- same parent interrupt: st,stm32-exti and st,stm32h7-exti")
+ same parent interrupt: st,stm32-exti and st,stm32h7-exti)
Example:
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index 356c29789cf54862e1ece93dc40449e221481304..3a66d3c483e1aad12298fcf297767931db09051a 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -152,7 +152,7 @@ Required properties:
- compatible : should contain one of:
"brcm,bcm7425-timers"
"brcm,bcm7429-timers"
- "brcm,bcm7435-timers and
+ "brcm,bcm7435-timers" and
"brcm,brcmstb-timers"
- reg : the timers register range
- interrupts : the interrupt line for this timer block
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index df873d1f3b7c598b6c30721d3eec915a20ea8621..f8c33890bc2970e08bf44934835a9b8c464675f1 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -238,7 +238,7 @@ PROPERTIES
Must include one of the following:
- "fsl,fman-dtsec" for dTSEC MAC
- "fsl,fman-xgec" for XGEC MAC
- - "fsl,fman-memac for mEMAC MAC
+ - "fsl,fman-memac" for mEMAC MAC
- cell-index
Usage: required
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 9b387f861aed166bda522f6e3d4ebb8856a49218..7dec508987c75c70ac194876df9d4f8019586aab 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -133,7 +133,7 @@ located inside a PM domain with index 0 of a power controller represented by a
node with the label "power".
In the second example the consumer device are partitioned across two PM domains,
the first with index 0 and the second with index 1, of a power controller that
-is represented by a node with the label "power.
+is represented by a node with the label "power".
Optional properties:
- required-opps: This contains phandle to an OPP node in another device's OPP
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
index ca69f5e3040cfa48299682dd6371f99c90b49ffa..ae326f26359740bce4fe7ac119288447649b6429 100644
--- a/Documentation/devicetree/bindings/regulator/tps65090.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -16,7 +16,7 @@ Required properties:
Optional properties:
- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
If DCDCs are externally controlled then this property should be there.
-- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
If DCDCs are externally controlled and if it is from GPIO then GPIO
number should be provided. If it is externally controlled and no GPIO
entry then driver will just configure this rails as external control
diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
index a21658f18fe6d7d593adece10e056e072fa2c5e4..3661e6153a92bf8df66cea43d5f41415cc497786 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -15,7 +15,7 @@ Please refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
-- compatible: Should be st,stih407-softreset";
+- compatible: Should be "st,stih407-softreset";
- #reset-cells: 1, see below
example:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index d330c73de9a2e0103aabc3cf365d02974faee73c..68b7d6207e3d75acd51400da27e5ca292c5026d0 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -39,7 +39,7 @@ Required properties:
Optional property:
- clock-frequency: Desired I2C bus clock frequency in Hz.
- When missing default to 400000Hz.
+ When missing default to 100000Hz.
Child nodes should conform to I2C bus binding as described in i2c.txt.
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
index 6a4aadc4ce06b27ff059c64f6c438d0fef863b21..84b28dbe9f15452bbe341f3dbf5e6f5452b72a19 100644
--- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
@@ -30,7 +30,7 @@ Required properties:
Board connectors:
* Headset Mic
- * Secondary Mic",
+ * Secondary Mic
* DMIC
* Ext Spk
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
index aa54e49fc8a26b397232f5ee340b7472f0b57a1c..c7600a93ab39e58bb62cc02e1f77a2d5132f1b08 100644
--- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
@@ -35,7 +35,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio.
"Digital Mic3"
Audio pins and MicBias on WCD9335 Codec:
- "MIC_BIAS1
+ "MIC_BIAS1"
"MIC_BIAS2"
"MIC_BIAS3"
"MIC_BIAS4"
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt
index 6e09c35d9f1a281a0046ed2c07dfce1f1312f48f..37091902a0210328e76582426eaec0eaa3a7ae3d 100644
--- a/Documentation/devicetree/bindings/w1/w1-gpio.txt
+++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt
@@ -15,7 +15,7 @@ Optional properties:
Examples:
- onewire@0 {
+ onewire {
compatible = "w1-gpio";
gpios = <&gpio 126 0>, <&gpio 105 0>;
};
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 848f549164cd0434ae8a28210d47b9ade2b42de3..466e3c8582f0fd62628b90872b2046971e064776 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -102,7 +102,7 @@ static u32 phandle_cache_mask;
* - the phandle lookup overhead reduction provided by the cache
* will likely be less
*/
-static void of_populate_phandle_cache(void)
+void of_populate_phandle_cache(void)
{
unsigned long flags;
u32 cache_entries;
@@ -134,8 +134,7 @@ out:
raw_spin_unlock_irqrestore(&devtree_lock, flags);
}
-#ifndef CONFIG_MODULES
-static int __init of_free_phandle_cache(void)
+int of_free_phandle_cache(void)
{
unsigned long flags;
@@ -148,6 +147,7 @@ static int __init of_free_phandle_cache(void)
return 0;
}
+#if !defined(CONFIG_MODULES)
late_initcall_sync(of_free_phandle_cache);
#endif
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
index 891d780c076a12d14dde8d50b87d940e9c83707e..216175d11d3dc2ca3fdfaa429306ecf50218a01a 100644
--- a/drivers/of/of_private.h
+++ b/drivers/of/of_private.h
@@ -79,6 +79,8 @@ int of_resolve_phandles(struct device_node *tree);
#if defined(CONFIG_OF_OVERLAY)
void of_overlay_mutex_lock(void);
void of_overlay_mutex_unlock(void);
+int of_free_phandle_cache(void);
+void of_populate_phandle_cache(void);
#else
static inline void of_overlay_mutex_lock(void) {};
static inline void of_overlay_mutex_unlock(void) {};
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 7baa53e5b1d74d469959341945e3bc239cf7d5c7..eda57ef12fd057b3d92c750dec983703e85f38e3 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -804,6 +804,8 @@ static int of_overlay_apply(const void *fdt, struct device_node *tree,
goto err_free_overlay_changeset;
}
+ of_populate_phandle_cache();
+
ret = __of_changeset_apply_notify(&ovcs->cset);
if (ret)
pr_err("overlay changeset entry notify error %d\n", ret);
@@ -1046,8 +1048,17 @@ int of_overlay_remove(int *ovcs_id)
list_del(&ovcs->ovcs_list);
+ /*
+ * Disable phandle cache. Avoids race condition that would arise
+ * from removing cache entry when the associated node is deleted.
+ */
+ of_free_phandle_cache();
+
ret_apply = 0;
ret = __of_changeset_revert_entries(&ovcs->cset, &ret_apply);
+
+ of_populate_phandle_cache();
+
if (ret) {
if (ret_apply)
devicetree_state_flags |= DTSF_REVERT_FAIL;