diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 44afa0e5057d1580698fa81462925d87a9896856..4ff65047bb9a8c63e3e647331fe2f32e1551db56 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -4,7 +4,7 @@ Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
- Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+ Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9f7121e6ecf02c561e5b1b10308659aad23fb28..f0895c581a89be8668a99db10e6873ae94be0cef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+dtb-$(CONFIG_ARCH_SUNXI) += \
+ sun4i-a10-cubieboard.dtb \
+ sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 272bbc65fab05b809b9df0a57497c14d37eac302..550eb772c30e4c47c2f7f0896469a033dee3e23b 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -33,7 +33,8 @@
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&mpic>;
- ranges = <0 0 0xd0000000 0x100000>;
+ ranges = <0 0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index b2c1b5af9749cd0f0b358d32dfbb159c7deab280..aee2b1866ce2ede35fbd58a6bbea1e29ac6b16ea 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -29,7 +29,8 @@
};
soc {
- ranges = <0 0xd0000000 0x100000>;
+ ranges = <0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
@@ -38,12 +39,12 @@
L2: l2-cache {
compatible = "marvell,aurora-outer-cache";
- reg = <0xd0008000 0x1000>;
+ reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x1d0>, <0x21870 0x58>;
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 26ad06fc147ed78f9446bb5119a1e6e001867dba..3ee63d128e27cf27b3c8f6c5211bcf05b6dadc9e 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,6 +39,9 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000
+ 0xf0000000 0 0xf0000000 0x1000000>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index f14d36c4615984399b71c36e920ed84be96fcb74..46b785064dd869917afa981103136459a5826922 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,6 +27,9 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000
+ 0xf0000000 0 0xf0000000 0x8000000>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bacab11c10dc8151eb7f2b6eb8cf0d2905a52f0e..5b902f9a3af29a84fd0ee83000c8d0f2ffa280ea 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -31,7 +31,7 @@
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 70b5ccbac234a63d12228e161e2620d4e2d8e40a..84c4bef2d7268760a6d927bd8ed2fdf7d547ea59 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -264,7 +264,7 @@
atmel,pins =
<0 10 0x2 0x0 /* PA10 periph B */
0 11 0x2 0x0 /* PA11 periph B */
- 0 24 0x2 0x0 /* PA24 periph B */
+ 0 22 0x2 0x0 /* PA22 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0 /* PA26 periph B */
0 27 0x2 0x0 /* PA27 periph B */
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3de8e6dfbcb150baa7251d1803990724d93e4fe2..8d25f889928eccd3c7a3440dd9522e4f1d34e37c 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -57,6 +57,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
};
ramc0: ramc@ffffe800 {
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 3b40d11d65e70c0daabdeddafe27180cacd12825..315250b4995e74e4452af0d0e46bb847790fbaf5 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -11,7 +11,7 @@
/include/ "at91sam9x5ek.dtsi"
/ {
- model = "Atmel AT91SAM9G25-EK";
+ model = "Atmel AT91SAM9X25-EK";
compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
ahb {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 82a404da1c0d9531b632e265943632e7ea48d468..99ba6e14ebf3f5880660e3073aebda1fdce3e53b 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -516,7 +516,7 @@
usb_otg_hs: usb_otg_hs@480ab000 {
compatible = "ti,omap3-musb";
reg = <0x480ab000 0x1000>;
- interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupts = <92>, <93>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
multipoint = <1>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2e643ea51cceba014b713843a81a1f11a4fd88be..5000e0d428496d8105f6157f4ba54b4603796657 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -75,11 +75,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf0004000 0x100>;
interrupts = <24 4 3>;
- cs-gpios = <&pioD 13 0
- &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
- &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
- &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -156,7 +151,7 @@
};
macb0: ethernet@f0028000 {
- compatible = "cnds,pc302-gem", "cdns,gem";
+ compatible = "cdns,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 4 3>;
pinctrl-names = "default";
@@ -203,11 +198,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf8008000 0x100>;
interrupts = <25 4 3>;
- cs-gpios = <&pioC 25 0
- &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
- &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
- &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f8ed404626cdb1edba6825a49c90d7a435d81aa..b336e7787cb3ea35ac312e83a66bc948a988e977 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -32,6 +32,10 @@
ahb {
apb {
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+ };
+
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index b28fbf3408e3b29c265db2f7448649819fe85df1..6f82d9368948856e8123b7193bbfc8230986f96f 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -14,13 +14,19 @@
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
+ /* This is where the interrupt is routed on the S8815 board */
+ external-bus@34000000 {
+ ethernet@300 {
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 0x1>;
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
ethernet-gpio {
- gpios = <&gpio3 19 0x1>;
- interrupts = <19 0x1>;
- interrupt-parent = <&gpio3>;
+ gpios = <&gpio3 8 0x1>;
};
/* This will bias the MMC/SD card detect line */
mmcsd-gpio {
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 4a7c35d6726aaa1290e4ee42b6ac47f517fc159a..078ed7f618d7910cc6030fdf9b288b3b124da065 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,8 +22,8 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc {
- uart0: uart@01c28000 {
+ soc@01c20000 {
+ uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 435d69b83e32ccf0d0faaa6bc9a90ca5b5d95046..abbe31937c65228e53dc2c97b4b2d4c14451ec38 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index a5f0485133cf9d9fc608a742e158b629405e1c7d..f7ba316164d4e9e4572f396249e70ad65e9163a9 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
CONFIG_DRM_TEGRA=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
@@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
-CONFIG_SENSORS_AK8975=y
+CONFIG_AK8975=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
index 2848857f5b62f91f7babe3ae928d932e252f723c..fbd24beeb1fad70886ea044387c873a65ef455e2 100644
--- a/arch/arm/include/debug/ux500.S
+++ b/arch/arm/include/debug/ux500.S
@@ -24,9 +24,9 @@
#define U8500_UART0_PHYS_BASE (0x80120000)
#define U8500_UART1_PHYS_BASE (0x80121000)
#define U8500_UART2_PHYS_BASE (0x80007000)
-#define U8500_UART0_VIRT_BASE (0xa8120000)
-#define U8500_UART1_VIRT_BASE (0xa8121000)
-#define U8500_UART2_VIRT_BASE (0xa8007000)
+#define U8500_UART0_VIRT_BASE (0xf8120000)
+#define U8500_UART1_VIRT_BASE (0xf8121000)
+#define U8500_UART2_VIRT_BASE (0xf8007000)
#define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE
#define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE
#endif
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 2acdff4c1dfea8c72c7106dff630a4870d6e70a9..180b3024bec3ab36cc2d7cdb62e92d7b2298d297 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void)
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
+ clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
+ clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
+ clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
- 2, AT91_ST_ALMV);
+ clockevents_register_device(&clkevt);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 13cdbcd48f51eca105add53d8a674a2ea0e5fa45..c7d670d118025eaf71a4dd145d0d3a33d300a415 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void)
at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
}
-void __init at91sam9n12_initialize(void)
-{
- at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-}
-
AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks,
- .init = at91sam9n12_initialize,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 31df12029c4e9a5b32695874e95fb9e4e4c75589..2bd7f51b0b8204d92c4bde747d197ad9dc21fa36 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */
#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */
-#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */
-#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */
-#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */
+#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */
+#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */
+#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 151259003086e8d1f0db34015742ab307b3f986a..dda9a2bd3acbb34da147542d3080770292c8771c 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -185,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void)
clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
@@ -498,7 +499,7 @@ int __init mx6q_clocks_init(void)
clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
- clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18);
+ clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 67b9c48dcafe7dc1ee281c49ece9de88338297f4..627f16f0e9d1d393d48527e50f25c5e22c81987d 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -18,8 +18,20 @@
.section ".text.head", "ax"
#ifdef CONFIG_SMP
+diag_reg_offset:
+ .word g_diag_reg - .
+
+ .macro set_diag_reg
+ adr r0, diag_reg_offset
+ ldr r1, [r0]
+ add r1, r1, r0 @ r1 = physical &g_diag_reg
+ ldr r0, [r1]
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ .endm
+
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
+ set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)
#endif
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 4a69305db65e395366187a84cde322e37fc99e94..c6e1ab5448822c8aaed044413f726b0dc8c47a39 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/smp.h>
+#include <asm/cacheflush.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
#include <asm/mach/map.h>
@@ -21,6 +22,7 @@
#define SCU_STANDBY_ENABLE (1 << 5)
+u32 g_diag_reg;
static void __iomem *scu_base;
static struct map_desc scu_io_desc __initdata = {
@@ -80,6 +82,18 @@ void imx_smp_prepare(void)
static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
+
+ /*
+ * The diagnostic register holds the errata bits. Mostly bootloader
+ * does not bring up secondary cores, so that when errata bits are set
+ * in bootloader, they are set only for boot cpu. But on a SMP
+ * configuration, it should be equally done on every single core.
+ * Read the register from boot cpu here, and will replicate it into
+ * secondary cores when booting them.
+ */
+ asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
+ __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg));
+ outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1));
}
struct smp_operations imx_smp_ops __initdata = {
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c2cae69e6d2bb9343798a7a3398ce174850d59cf..f389228975637cd85d3f9f9444ae30e0f34537cc 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -528,12 +528,6 @@ void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
- /*
- * Some Kirkwood devices allocate their coherent buffers from atomic
- * context. Increase size of atomic coherent pool to make sure such
- * the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
mvebu_mbus_init("marvell,kirkwood-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 283abff902287357a27da54427a390432317bca2..e1267d6b468f1f6d0d0a0e7efa40391bff077183 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void)
static int __init ts219_pci_init(void)
{
if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE0);
+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
return 0;
}
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index e11acbb0a46d4316c82f23cb333744cbab41d89f..80a8bcacd9d539c0a684e3beaa927b07dd720566 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -15,6 +15,7 @@ config ARCH_MVEBU
select MVEBU_CLK_GATING
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
+ select ARCH_REQUIRE_GPIOLIB
if ARCH_MVEBU
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 42a4cb3087e23ab04ea2e7e22971c1f38aeb9aa2..1c48890bb72b2c7ad1301cdc9f8bad007362bf57 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -53,13 +53,6 @@ void __init armada_370_xp_init_early(void)
{
char *mbus_soc_name;
- /*
- * Some Armada 370/XP devices allocate their coherent buffers
- * from atomic context. Increase size of atomic coherent pool
- * to make sure such the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
-
/*
* This initialization will be replaced by a DT-based
* initialization once the mvebu-mbus driver gains DT support.
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 68ab858e27b754bea93264889ab9b020cf67d698..a94b3a718d1a771dda53f5e06542fb6a6989cee8 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void)
dev_err(&pdev->dev,
"%s: Memory allocation failed for d->chan!\n",
__func__);
+ ret = -ENOMEM;
goto exit_release_d;
}
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
index 6ebc7803bc3e37b48ff9c1b394a39e2a3dff9a28..af3544ce4f0273b8eb8b43c22295a5ae6ced76a3 100644
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ b/arch/arm/mach-omap2/cclock33xx_data.c
@@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
*/
DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
-DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0,
- AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
- 0x0, NULL);
+static struct clk clkdiv32k_ick;
+
+static const char *clkdiv32k_ick_parent_names[] = {
+ "clkdiv32k_ck",
+};
+
+static const struct clk_ops clkdiv32k_ick_ops = {
+ .enable = &omap2_dflt_clk_enable,
+ .disable = &omap2_dflt_clk_disable,
+ .is_enabled = &omap2_dflt_clk_is_enabled,
+ .init = &omap2_init_clk_clkdm,
+};
+
+static struct clk_hw_omap clkdiv32k_ick_hw = {
+ .hw = {
+ .clk = &clkdiv32k_ick,
+ },
+ .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT,
+ .clkdm_name = "clk_24mhz_clkdm",
+};
+
+DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
/* "usbotg_fck" is an additional clock and not really a modulemode */
DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d25a95fe99216c582f97b0a0aee860c3573eaf68..7341eff63f56df8f58d5b72d8db9a71feb86112d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1356,13 +1356,27 @@ static void _enable_sysc(struct omap_hwmod *oh)
clkdm = _get_clkdm(oh);
if (sf & SYSC_HAS_SIDLEMODE) {
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ oh->flags & HWMOD_SWSUP_SIDLE_ACT) {
+ idlemode = HWMOD_IDLEMODE_NO;
+ } else {
+ if (sf & SYSC_HAS_ENAWAKEUP)
+ _enable_wakeup(oh, &v);
+ if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+ idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+ }
+
+ /*
+ * This is special handling for some IPs like
+ * 32k sync timer. Force them to idle!
+ */
clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
if (clkdm_act && !(oh->class->sysc->idlemodes &
(SIDLE_SMART | SIDLE_SMART_WKUP)))
idlemode = HWMOD_IDLEMODE_FORCE;
- else
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1391,10 +1405,6 @@ static void _enable_sysc(struct omap_hwmod *oh)
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
- /* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
- _enable_wakeup(oh, &v);
-
_write_sysconfig(v, oh);
/*
@@ -1430,13 +1440,16 @@ static void _idle_sysc(struct omap_hwmod *oh)
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
- if (oh->flags & HWMOD_SWSUP_SIDLE ||
- !(oh->class->sysc->idlemodes &
- (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ if (oh->flags & HWMOD_SWSUP_SIDLE) {
idlemode = HWMOD_IDLEMODE_FORCE;
- else
- idlemode = HWMOD_IDLEMODE_SMART;
+ } else {
+ if (sf & SYSC_HAS_ENAWAKEUP)
+ _enable_wakeup(oh, &v);
+ if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+ idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+ }
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1455,10 +1468,6 @@ static void _idle_sysc(struct omap_hwmod *oh)
_set_master_standbymode(oh, idlemode, &v);
}
- /* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
- _enable_wakeup(oh, &v);
-
_write_sysconfig(v, oh);
}
@@ -2065,7 +2074,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
* do so is present in the hwmod data, then call it and pass along the
* return value; otherwise, return 0.
*/
-static int __init _enable_preprogram(struct omap_hwmod *oh)
+static int _enable_preprogram(struct omap_hwmod *oh)
{
if (!oh->class->enable_preprogram)
return 0;
@@ -2245,42 +2254,6 @@ static int _idle(struct omap_hwmod *oh)
return 0;
}
-/**
- * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit
- * @oh: struct omap_hwmod *
- * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
- *
- * Sets the IP block's OCP autoidle bit in hardware, and updates our
- * local copy. Intended to be used by drivers that require
- * direct manipulation of the AUTOIDLE bits.
- * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes
- * along the return value from _set_module_autoidle().
- *
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
-{
- u32 v;
- int retval = 0;
- unsigned long flags;
-
- if (!oh || oh->_state != _HWMOD_STATE_ENABLED)
- return -EINVAL;
-
- spin_lock_irqsave(&oh->_lock, flags);
-
- v = oh->_sysc_cache;
-
- retval = _set_module_autoidle(oh, autoidle, &v);
-
- if (!retval)
- _write_sysconfig(v, oh);
-
- spin_unlock_irqrestore(&oh->_lock, flags);
-
- return retval;
-}
-
/**
* _shutdown - shutdown an omap_hwmod
* @oh: struct omap_hwmod *
@@ -3179,38 +3152,6 @@ error:
return ret;
}
-/**
- * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
- * @oh: struct omap_hwmod *
- * @idlemode: SIDLEMODE field bits (shifted to bit 0)
- *
- * Sets the IP block's OCP slave idlemode in hardware, and updates our
- * local copy. Intended to be used by drivers that have some erratum
- * that requires direct manipulation of the SIDLEMODE bits. Returns
- * -EINVAL if @oh is null, or passes along the return value from
- * _set_slave_idlemode().
- *
- * XXX Does this function have any current users? If not, we should
- * remove it; it is better to let the rest of the hwmod code handle this.
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
-{
- u32 v;
- int retval = 0;
-
- if (!oh)
- return -EINVAL;
-
- v = oh->_sysc_cache;
-
- retval = _set_slave_idlemode(oh, idlemode, &v);
- if (!retval)
- _write_sysconfig(v, oh);
-
- return retval;
-}
-
/**
* omap_hwmod_lookup - look up a registered omap_hwmod by name
* @name: name of the omap_hwmod to look up
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index fe5962921f07244e602429b758f0d5ccecb7398c..0c898f58ac9bb490e8873a24074e53c1480530a6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm {
* is kept in force-standby mode. Failing to do so causes PM problems
* with musb on OMAP3630 at least. Note that musb has a dedicated register
* to control MSTANDBY signal when MIDLEMODE is set to force-standby.
+ * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
+ * out of idle, but rely on smart-idle to the put it back in idle,
+ * so the wakeups are still functional (Only known case for now is UART)
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
#define HWMOD_FORCE_MSTANDBY (1 << 11)
+#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
/*
* omap_hwmod._int_flags definitions
@@ -641,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index c8c64b3e1acc009efa24b91da269034b8603e714..d05fc7b54567f0dbb6597a1d641ce130caf7ee9b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = {
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = {
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = {
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 01d8f324450a951f89174b4cebdf82f8b9dad6b1..075f7cc510261ee959352daf07818370b4188ab9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
.name = "uart1",
.class = &uart_class,
.clkdm_name = "l4_wkup_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart1_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_wkupdm_ck",
@@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
.name = "uart2",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart2_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = {
.name = "uart3",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart3_irqs,
.sdma_reqs = uart3_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = {
.name = "uart4",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart4_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = {
.name = "uart5",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart5_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = {
.name = "uart6",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart6_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 4083606ea1da15e7efeb279d7c33c3f3cc7618b3..31c7126eb3bb65d724cfc71ed0c0733a4202e4d6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
@@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
.mpu_irqs = uart4_mpu_irqs,
.sdma_reqs = uart4_sdma_reqs,
.main_clk = "uart4_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index eaba9dc91a0d9824a530cf185537a28a881b5a24..848b6dc67590716f7663151f46a5809f097e9cf1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = {
.name = "uart1",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart1_irqs,
.sdma_reqs = omap44xx_uart1_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = {
.name = "uart2",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart2_irqs,
.sdma_reqs = omap44xx_uart2_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = {
.name = "uart3",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+ HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart3_irqs,
.sdma_reqs = omap44xx_uart3_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
.name = "uart4",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart4_irqs,
.sdma_reqs = omap44xx_uart4_sdma_reqs,
.main_clk = "func_48m_fclk",
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8396b5b7e912d91e48adbcc3b785041845b9f677..f6601563aa6903f93e04f9656a58593907f89b0e 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable)
omap_hwmod_disable_wakeup(od->hwmods[0]);
}
-/*
- * Errata i291: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- * WA: configure uart in force idle mode.
- */
-static void omap_uart_set_noidle(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *od = to_omap_device(pdev);
-
- omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
-}
-
-static void omap_uart_set_smartidle(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *od = to_omap_device(pdev);
- u8 idlemode;
-
- if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
- idlemode = HWMOD_IDLEMODE_SMART_WKUP;
- else
- idlemode = HWMOD_IDLEMODE_SMART;
-
- omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
-}
-
#else
static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
-static void omap_uart_set_noidle(struct device *dev) {}
-static void omap_uart_set_smartidle(struct device *dev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
@@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
omap_up.flags = UPF_BOOT_AUTOCONF;
omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
- omap_up.set_forceidle = omap_uart_set_smartidle;
- omap_up.set_noidle = omap_uart_set_noidle;
omap_up.enable_wakeup = omap_uart_enable_wakeup;
omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
omap_up.dma_rx_timeout = info->dma_rx_timeout;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b97fd672e89d74f40e3ebfc0b1e18c365be785f3..f8a6db9239bf3c3ff7a88c29925cdce0961590cb 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -199,13 +199,6 @@ void __init orion5x_init_early(void)
orion_time_set_base(TIMER_VIRT_BASE);
- /*
- * Some Orion5x devices allocate their coherent buffers from atomic
- * context. Increase size of atomic coherent pool to make sure such
- * the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
-
/* Initialize the MBUS driver */
orion5x_pcie_id(&dev, &rev);
if (dev == MV88F5281_DEV_ID)
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 91052855cc1216245eb71fe14cb13d5e5f85c63d..b9594e911ce7680d28448fa50cf854ceb91b33bf 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = {
static struct usb_phy *phy;
static int usb_power_on(struct platform_device *pdev)
{
- if (!phy)
- return -EIO;
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
@@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev)
static void usb_power_off(struct platform_device *pdev)
{
- if (!phy)
+ if (IS_ERR(phy))
return;
usb_phy_shutdown(phy);
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d259c782d742873f0e0c53b1a43e7bcd85069286..5b045e302b4359d65b91ac31110dd566d2e10391 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,6 @@
config ARCH_SUNXI
bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 6a4387e39df809f1b21d899b89d2212924ae19cd..b19b07204aafbeb53ced9f4226164ecd9c036cff 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -51,6 +51,7 @@ config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
select I2C
select I2C_NOMADIK
+ select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select SOC_BUS
select UX500_SOC_DB8500
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 3cd555ac6d0a3e5c81478dfbf71f79f10e72b73b..78389de94dde34f6eaee0f73c479d33eda4846dd 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -623,7 +623,7 @@ static void __init mop500_init_machine(void)
sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
mop500_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
@@ -660,7 +660,7 @@ static void __init snowball_init_machine(void)
sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
snowball_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
snowball_platform_devs[i]->dev.parent = parent;
@@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void)
sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
hrefv60_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index e90b5ab23b6daf7e691bbff5b74fd6c165e96518..46cca52890bcfd486f30018556059c12bcf22391 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void)
/*
* This function is called from the board init
*/
-struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
+struct device * __init u8500_init_devices(void)
{
struct device *parent;
int i;
@@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
- db8500_prcmu_device.dev.platform_data = ab8500;
-
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
return parent;
@@ -278,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
- OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL),
+ OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
/* Requires device name bindings. */
OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index bddce2b493722f84c5821103a38eea4a85d8833d..cad3ca86c540f7eb67c454ce44f0317b80312ad3 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -18,7 +18,7 @@
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
-extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500);
+extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
extern void __init ux500_init_late(void);
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 1dd281efc02035dac37cc971a0db4c69c98c8a11..f5c33df7a5971731844478e9a29024c660c35c52 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = {
"wm,wm8505",
"wm,wm8750",
"wm,wm8850",
+ NULL
};
DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 251f827271e918adf62b378d59aef9e7272d8b70..c019b7aaf776b7d622aa5c97146070aee57ef523 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = {
static struct platform_device orion_ge10_shared = {
.name = MV643XX_ETH_SHARED_NAME,
- .id = 1,
+ .id = 2,
.dev = {
.platform_data = &orion_ge10_shared_data,
},
@@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = {
static struct platform_device orion_ge10 = {
.name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = 2,
+ .id = 2,
+ .num_resources = 1,
.resource = orion_ge10_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = {
static struct platform_device orion_ge11_shared = {
.name = MV643XX_ETH_SHARED_NAME,
- .id = 1,
+ .id = 3,
.dev = {
.platform_data = &orion_ge11_shared_data,
},
@@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = {
static struct platform_device orion_ge11 = {
.name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = 2,
+ .id = 3,
+ .num_resources = 1,
.resource = orion_ge11_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e06fc5fefa14c9ec7d0b46b002da64bc8cb425f8..d9a24f605a2b786dce8a85744c662f310f7d80a8 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -10,6 +10,7 @@
#ifndef __PLAT_COMMON_H
#include <linux/mv643xx_eth.h>
+#include <linux/platform_data/usb-ehci-orion.h>
struct dsa_platform_data;
struct mv_sata_platform_data;
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 8292a00c3de9f1dbae8b19e23b6ac45b3d275866..075db0c99edb9b8569556d853fbaee0e88c2cb2c 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -872,6 +872,14 @@ static void __init tegra20_periph_clk_init(void)
struct clk *clk;
int i;
+ /* ac97 */
+ clk = tegra_clk_register_periph_gate("ac97", "pll_a_out0",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 3, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra20-ac97");
+ clks[ac97] = clk;
+
/* apbdma */
clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base,
0, 34, &periph_h_regs,
@@ -1234,9 +1242,6 @@ static __initdata struct tegra_clk_init_table init_table[] = {
{uartc, pll_p, 0, 0},
{uartd, pll_p, 0, 0},
{uarte, pll_p, 0, 0},
- {usbd, clk_max, 12000000, 0},
- {usb2, clk_max, 12000000, 0},
- {usb3, clk_max, 12000000, 0},
{pll_a, clk_max, 56448000, 1},
{pll_a_out0, clk_max, 11289600, 1},
{cdev1, clk_max, 0, 1},
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 30d4f7a783cd1f0bbfdf6ebaf491f2400153eaf0..f0b9f6b52b32cd887ad6b86586f97aa9eec9648c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -202,26 +202,6 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
return pdata->get_context_loss_count(up->dev);
}
-static void serial_omap_set_forceidle(struct uart_omap_port *up)
-{
- struct omap_uart_port_info *pdata = up->dev->platform_data;
-
- if (!pdata || !pdata->set_forceidle)
- return;
-
- pdata->set_forceidle(up->dev);
-}
-
-static void serial_omap_set_noidle(struct uart_omap_port *up)
-{
- struct omap_uart_port_info *pdata = up->dev->platform_data;
-
- if (!pdata || !pdata->set_noidle)
- return;
-
- pdata->set_noidle(up->dev);
-}
-
static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
{
struct omap_uart_port_info *pdata = up->dev->platform_data;
@@ -298,8 +278,6 @@ static void serial_omap_stop_tx(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
- serial_omap_set_forceidle(up);
-
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
}
@@ -364,7 +342,6 @@ static void serial_omap_start_tx(struct uart_port *port)
pm_runtime_get_sync(up->dev);
serial_omap_enable_ier_thri(up);
- serial_omap_set_noidle(up);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
}
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
index ff9b0aab5281c2251e93f5a6f56ea09cf2e31289..c860c1b314c0473a7737cd6c7dacd65344fbc656 100644
--- a/include/linux/platform_data/serial-omap.h
+++ b/include/linux/platform_data/serial-omap.h
@@ -43,8 +43,6 @@ struct omap_uart_port_info {
int DTR_present;
int (*get_context_loss_count)(struct device *);
- void (*set_forceidle)(struct device *);
- void (*set_noidle)(struct device *);
void (*enable_wakeup)(struct device *, bool);
};